Cine Versum Cineversum Blackwing Three Pro User Manual

4.0  MENU OPTIONS
R599751 - Master Three User Manual 21 
Using Presets
You can use Presets with either the OSD or the Remote Control Input Aspect Ratio button. Refer to the Preset sub-
menu in the Input AR menu for doing this with the OSD. The remote control operation is described below.
•4:3 Selects 4:3 Full Frame without OSD.
•16:9 Selects 16:9 Full Frame without OSD.
Pushing the Input Aspect Ratio button repeatedly selects Preset 1 through Preset 10 and User in sequence without
using the On-Screen...

4.0  MENU OPTIONS
22 R599751 - Master Three User Manual
•VCR mode
•Film mode
•HDCP Mode
•Auto Priority
•Audio Input
•AV Lip Sync
Deinterlacing
You can choose between seven different deinterlacing methods that better suits your need:
•Auto:
This setting is to be used with when the content may be a mix of film and video based content.
•Film Bias Mode:
This mode is intended for use on content that is known to be film-based
•Video Mode:
This mode is intended for use on content that is known to be video-based....

4.0  MENU OPTIONS
R599751 - Master Three User Manual 23 
Color Space
The color space setting allows the user to specify what the input signal is on the RGBHV/Component and HDMI
inputs. The YPbPr setting only applies to the RGBHV/Component input. The YCbCr 4:2:2 and YCbCr 4:4:4 and Auto
settings only apply to the HDMI inputs. The options are:
•RGB
•YPbPr
•YCbCr 4:2:2 color space
•YCbCr 4:4:4 color space
•Auto
Input Level
The input level setting allows the user to specify the levels of the input signal,...

4.0  MENU OPTIONS
24 R599751 - Master Three User Manual
AV Lip Sync
The Master Three automatically delays the input audio to match the video processing delay. You can choose to
increase or decrease the audio delay by changing this setting. Push the Up or Down button to display the current
additional bias delay setting (default 0). Use the Up or Down button to increase or decrease the delay in
milliseconds.
4.4 Picture Controls
Brightness
This control adjusts the brightness (black level) of the overall...

4.0  MENU OPTIONS
R599751 - Master Three User Manual 25 
when the source is encoded as interlaced (also sometimes called Interlaced Chroma Problem, or ICP).
4.5 Configuration
Test Patterns
The Master Three has 35 internal test patterns to assist in the setup of your individual sources and your display. To
learn more about how to use the internal test patterns, refer to the section Setting up an Master Three Using the
Internal Test Patterns and Avia: Guide to Home Theater Calibration DVD. To turn the test...

4.0  MENU OPTIONS
26 R599751 - Master Three User Manual
•Video Input Priority Settings:
1 – HDMI 1
2 – HDMI 2
3 – HDMI 3
4 – HDMI 4
5 – Component 1
6 – Component 2
7 – S-Video 1
8 – S-Video 2
9 – Video 1
10 – Video 2
11 – SDI
12 – RGBHV/Component
•Digital Audio Input Assignment: each video input can be assigned to an audio input, this setting is set to off by
default.
Software Update
To install the latest software for your Master Three, please follow the procedure described below.
1) Set the...

4.0  MENU OPTIONS
R599751 - Master Three User Manual 27 
Output Format
Push the Down button to show the current output format. Push the Down button again to show the next item on the
list below. You cannot select the format until you press the Exit button. Press the Enter button again to select the
output timing controls, explained in the Output Timing section.
Output Aspect Ratio Control
There are four controls for Output Aspect Ratio (OAR):
•Display Aspect Ratio
•Screen Aspect Ratio
•Image Shift...

4.0  MENU OPTIONS
28 R599751 - Master Three User Manual
The Display Aspect Ratio is the full aspect ratio of the display, normally specified in the display manual. Common
display aspect ratios are 4:3 and 16:9. Less common ones are 5:4, 2.35:1 and others. The example below shows a
4:3 projection with a 16:9 screen.
The region outside the Active Output area (called the mask) is inactive, and only important for creating video timing
signals for the display. Input video data is never mapped to this region....

4.0  MENU OPTIONS
R599751 - Master Three User Manual 29 
Color Space
The color space parameter sets the color space of the output format. Press the Up or Down button to show the
current color space. Press the same button again to select the alternate color space. Two analog color space
options are supported: YPbPr (default) and RGB. Two digital color space options are supported: RGB (default) and
YCbCr (both 4:2:2 and 4:4:4).
Output Level
The output level setting allows the user to specify the levels of...

4.0  MENU OPTIONS
30 R599751 - Master Three User Manual
•Output Aspect Ratio
•Sync Type
•Color Space (YPbPr/YCbCr or RGB)
•Output Level (Video or PC)
•Frame Rate Conversion information
•Border Level
•Gamma Correction
•HDCP Mode
You can save up to ten display profiles (Profile 1 through 10).
A current custom display profile (called User) is also stored in non-volatile memory. However it will be overridden
when you make any modifications to the display profile. You should always save the current display profile...