Christie Projector Mirage WU12K-M Specification

							Redefine your expectations.
M Series
3D mapping
Auditoriums
Boardrooms
Broadcast studios
Business presentations
Civil engineeringConstruction management
Energy
Events and large venues
Home cinema
Houses of worship
Industrial designMedical training
Museums and education
Post-production
 
Scientific research
Theme parks
And more… 
						

							Reinvent tHe StAnDARDS
1
1 WXGA models are not 3D capable. 2 Using dynamic iris. 3 US Patents 7,230,768; 6,205,271; 6,734,957. 4 Patent pending.
6
3258
1
79
4
[ 1 ] Dual-lamp system3, 4Dual lamp design vs quad (4)  
lamp design
Brightness
200W 350W 450W
Dual lamp max 
power  6300 ANSI lumens 
(6930 center lumens)
  10,500 ANSI lumens 
 
(11,500 center lumens) 12,500 ANSI lumens 
(14,000 center lumens)
min 
power   4725 ANSI lumens  
(5200 center lumens)
  8535 ANSI lumens  
(9400 center lumens) 9740 ANSI lumens
(10,900 center lumens)
Single 
lamp  max 
power
  3150 ANSI lumens  
(3465 center lumens)
  5250 ANSI lumens  
(5775 center lumens) 6250 ANSI lumens
(7000 center lumens)
min 
power   2360 ANSI lumens  
(2600 center lumens)
  4260 ANSI lumens  
(4700 center lumens) 4870 ANSI lumens
(5450 center lumens)
   
Lumen values are for SXGA+ models. Flexible lumens levels at various lamp 
powers. Lamp power is specific to each model and cannot be interchanged.
Brightness Center lumensResolution
Christie WX7K-M16270 WXGA
Christie WX10K-M110,450 WXGA
Christie DS+6K-M 6930 
SXGA+
Christie DS+10K-M 11,550 
SXGA+
Roadster S+10K-M 11,550 
SXGA+
Christie DS+14K-M 14,000
SXGA+
Roadster S+14K-M 14,000
SXGA+
Christie HD6K-M 6300
1080 HD
Christie HD10K-M 11,000 
1080 HD
Roadster HD10K-M 11,000 
1080 HD
Christie HD14K-M 13,500
1080 HD
Roadster HD14K-M 13,500
1080 HD
Christie WU7K-M 6930
WUXGA
Christie WU12K-M 11,550 
WUXGA
Roadster WU12K-M 11,550 
WUXGA
Christie WU14K-M 14,000
WUXGA
Roadster WU14K-M 14,000
WUXGA
  High-efficiency,  dual-lamp  system
  200W, 350W or 450W (two-lamp system)
120V (operation) for full brightness
At maximum brightness 12,500 ANSI (14,000 center) lumens 
the unit only draws 1500W (450W lamp) 
  Stand-by power consumption (phantom power draw) is less than 20W
Lamps can be hot swapped while projector is powered on and in useA dual lamp design:
Uses less power to achieve the same  
levels of brightness as quad lamps 
Lowers cost of ownership:
•  Only two lamps need to be replaced 
instead of four
•   Less energy is used to power the projector
Redundancy – the second lamp remains in 
a state of readiness for continuous uptime
Flexibility – you can choose to operate in: 
Single lamp mode:
• When ambient light is controlled• Enhances energy and cost savings• Extends life of the projector 
Dual lamp mode is ideal for applications 
where increased brightness is required
Consistent 24/7 operation – a dual lamp 
design enables continuous projection for 
long periods of time
We didn’t just raise  
the bar, we redefined  
the entire game.
the Christie M Series shining even 
brighter than before 
We’ve designed the M Series, a flexible, efficient line  
of 3-chip DLP® projectors, with your needs in mind.
The most compact in its class, this dual mercury lamp 
platform, now with even more choice in brightness 
levels, provides the high-performance and feature-rich 
standards you’ve come to expect from all Christie
® 
products. We've also made it possible to future-proof 
your investment. Select M Series
1 projectors can be 
upgraded from their existing 2D display technology to 
include 3D capabilities – ensuring your 3D needs are 
met for today and tomorrow.
Ranging from 2360 ANSI (2600 center) lumens (single 
lamp, 200W) to 12,500 ANSI (14,000 center) lumens 
(dual lamp, 450W), each M Series projector offers high 
efficiency and low cost of ownership by operating at 
1500W (450W lamp) – giving you full brightness while 
using less power.
The Christie M Series platform includes four resolutions, 
WXGA (1366 x 768), SXGA+ (1400 x 1050), HD (1920 x 1080) 
and WUXGA (1920 x 1200), all with a variable contrast 
ratio of 2500-10,000:1
2 full on/full off (650:1 ANSI) for 
crisp, detailed images. Each of the projectors in the 
series can also be fitted with the broadest range  
of high quality lenses – all with true Intelligent Lens 
System (ILS
™) capabilities.
All this, combined with a 3-year warranty and our  
industry leading service and support, enables the 
M Series to provide high performance and peace  
of mind for everyone. 
						

							Regular 
color gamut
Expanded 
color gamut
REC 709
   Standard color gamut   Expanded color gamut
Reinvent tHe St AnDARDS
2
 Full suite of lenses LCD keyboard Intelligent Lens System 3-chip DLP technology
[ 2 ] image quality
 
3-chip DLP technology, high-quality optics  
and world-class 10-bit image processing. 
With low maintenance and highly reliable 
(>100,000 MTBF for DMDs) DLP technology, 
the Christie M Series delivers:
  High  brightness
 Excellent  color 
Excellent uniformity
High contrast
Excellent fill ratio
[ 3 ] intelligent Lens System (iLS)
 
The ILS automatically recognizes and  
calibrates a lens when it is installed. Stepper 
motor based encoding ensures that motor 
drift does not occur, as typically found with 
DC encoded motors, providing accurate 
and repeatable recall of all lens offset, 
zoom and focus positions. This lens system 
ensures that the images adjust to optimize 
screen coverage and maintain alignment in 
applications with moving screens or variable 
aspect ratios.
[ 4 ] expanded lens suite
 
With the addition of a short zoom (1.25-1.6:1 
SX+/1.16-1.49:1 HD) and a long zoom  
(7.5-11.2:1 SX+/6.9-10.4:1 HD), this expanded 
suite provides the broadest range of HD 
lenses in this marketplace.
LCD keyboard
This easy-to-use LCD keypad includes:
    Contextual menus provide a fully-featured, 
intuitive interface; removing the need for  
a cluttered keypad
  Large, four line LCD display
Adjustable brightness and timed 
 LCD off mode
Intuitive keypad design that lights up  
when features are active – making it  
user friendly
  Active keys are color-coded amber to 
indicate that selections will result in 
changes visible to the audience
[ 6 ] Motorized yellow notch filter
The motorized yellow notch filter optically 
expands the color gamut for richer greens  
and yellows. Since you lose some brightness   
by improving the greens and yellows, this  
is a channel-configurable option which 
enables you to decide when it is needed. 
This filter, available on M Series HD and 
WUXGA models only, is ideal when video  
is being displayed. 
						

							WhitesBlacks No Dynamic iris –
standard contrast ratio.
Dynamic iris – this feature
dramatically increases the
on/off contrast ratio of the
system. A fast-acting dynamic
iris optically minimizes the
black levels in the image
while electronically increasing
the gain in the image which
enhances the overall detail
in the blacks.
CR=
Whites
Blacks
Intensity
2500                                  4000                              \
     10,000                                   6000
Overlap areaeaOverlap are
[ 8 ] embedded Christie t wist
 
Standard in all Christie M Series models, Christie Twist
™ 
enables seamless edge-blending of multiple curved images 
faster and more easily than through traditional, manual 
methods. Controlled by an easy-to-use GUI, users can 
expertly control and edge-blend or stack multiple curved 
images. As well, images can be warped to fit virtually any 
dimension or shape display. Embedded Christie Twist 
ensures that all M Series projectors work with value-added 
accessories, such as Christie AutoStack
™.
[ 8 ] Multi-window/screen processing 
 
External processors are not required for simple, small 
tiled and blended arrays, therefore lowering your costs for 
installation. Each M Series projector has the ability to send 
signals to multiple projectors (up to a 3x3 array) without any 
additional hardware or software. The projectors in the tiled 
array can then show only the portion of the signal that they 
need to project. 
[ 8 ] embedded edge blending and color matching 
 
Advanced blending capabilities and Comprehensive Color 
Adjustment (CCA
™) ensure digitally accurate color matching 
and uniformity across multi-screen blended or tiled images.
Reev ALUA te tHe POSSiBiLitieS
3
   Without  edge   
blending
  Easy-to-use GUI Easy-to-use GUI
   Curved  screen   
– with blending    Image on curved screen  
– without blending
   With  edge   
blending
[ 7 ] Dynamic iris1
 
Ideal for video applications, the dynamic iris is a 
channel-configurable option. It automatically adjusts   
an internal iris to extend the range of blacks and 
provide richer details during dark scenes for true  
image reproduction. A variable contrast ratio of  
2500 -10,000:1 produces a picture with a rich,  
dynamic appearance.
1 Not available in DS+14K-M, Roadster S+14K-M, HD14K-M, Roadster HD14K-M,\
 WU14K-M, Roadster WU14K-M, Mirage DS+14K-M, Mirage HD14K-M, Mirage WU14K-M models. 
						

							[ 8 ] Projector control and management 
 
Users can access all projector menus and 
control through a web interface (via Ethernet) 
without disrupting the live presentation. 
This allows for real-time adjustments and 
monitoring of each projector on the network 
– regardless of geographic location.
[ 8 ] Automatic shut-off1 
 
This feature lowers the cost of ownership by 
reducing power consumption and extending 
lamp life when the projector is not in use.  
In this mode, if a signal is not detected, the 
projector will close the shutter and reduce 
power to the lamps. If there is still no signal, 
the system will go into standby mode. If a 
signal is detected during the ramp-down 
phase, the unit will revert back to its full 
power, dual lamp mode.
Quiet operation 
 
When a presentation depends on the full 
attention of the audience, noise from a 
projector can be distracting. The filter-
free design with auto-sensing fan and 
temperature sensors automatically adjust  
for a virtually noise-free operation.
[ 9 ] LiteLOC
 
The LiteLOC
™ feature automatically manages 
your display’s brightness levels over time 
so that you can match the brightness of a 
multiple projector system in tiled or blended 
arrays. This feedback system continuously 
monitors lamp brightness, so that as the lamp 
goes through its natural brightness decay, the 
system increases the lamp power in order to 
maintain consistent brightness.  
Aspect ratios
 
Wide screen ratios provide a multitude of 
benefits in a variety of different projection 
applications. Carefully matching the pixel 
format of the projector with that of the 
sources to be displayed will ensure the best 
image quality and maximum impact. The  
M Series offers 4:3, 16:9 and 16:10 models  
to match the aspect ratio requirements of 
any application.
 
No CCAR
G B
With CCA
Time
Constant r egulated brightness
Natural lamp brightness
Lamp power
Brightness
Lamp Power Management (LPM)
Comprehensive Color Adjustment (CCA)
SXGA+ WXGA
HD
WUXGA
Reev ALUA te tHe POSSiBiLitieS
4
   Without  LiteLOC
   Main page controls  
and information   Virtual On Screen   
Display (OSD):  
access full menu  
structure, remotely
    Admin screen includes 
upload, backup, restore 
and more   Status and diagnostics: 
display alarm events   
for quick projector 
monitoring and diagnosis
   With  LiteLOC
5000
500
Frequency (Hz) 350W Dual
200W Dual
200W Single50
0
60
dBA
   
Sound is reduced in the 
various modes, as well, 
high pitched, annoying 
frequencies are 
minimized for optimal 
sound quality.
Sound and Output Frequency
1 Users determine the length of time before shutter closes, as well as when to go into standby mode. 
						

							5
Analog input card 
The Analog input card accepts an analog 
video signal input over a 5 BNC connector 
interface. It can accept RGBH&V signals over 
5 connectors, as well as component YPbPr 
signals on the RGB inputs.
Dual 3G SD/HD-SDI input card
The Dual 3G SD/HD-SDI input card accepts 
both standard definition (SD) and high-
definition (HD) serial-digital-interface (SDI) 
signals, and enables you to connect two of 
either types of signal. Both single-link HD 
and dual-link HD signals are accepted.  
This card also has two 3G SD/HD-SDI 
outputs to enable “loop-through” for its 
respective input.Video decoder input card 
The Video decoder input card accepts 
various types of standard definition (SD) 
video, including CVBS (composite video), 
S-video, and component. It accepts NTSC 
3.58, NTSC 4.4, PAL, PAL-N, PAL-M or 
SECAM formats. This card has two mini-DIN 
connectors (for S-video signals) and four 
BNC connectors that can be grouped to 
allow combinations of CVBS, S-Video, YPbPr 
or RGB video sources.Dual-link DVI input card
The Dual-link DVI input card has a 330 MHz 
DVI-I connector which can support a single 
or dual-link DVI, analog and HDCP video 
signals with proper cables. There is also an 
additional 15-pin VGA connector. Only one 
input is active on this card at a time. Christie 
Mirage M Series models come standard with 
two of these cards installed.
Twin HDMI input card 
The Twin HDMI
™ input card accepts two 
HDMI inputs and provides 12-bit deep color 
handling on the input. It also supports the 
HDMI v1.4a format required for 3D systems 
providing the projector is upgraded with 3D 
capabilities. Additionally, advanced loop-
through allows any input on any input card to 
be looped through to the two HDMI outputs 
on the card.
This functionality ensures that when stacking 
systems with any input, the Twin HDMI 
card can be used to send the signal to a 
second projector. This stacked system is 
also a passive loop-through providing the 
repeater projector has AC power, even 
when powered off, the signal will continue 
to be looped out to the second projector.
ReinFORCe PeRFORMAnCe
[ 8 ] i nput cards
 
In total, there are four input card slots 
available. Each projector is equipped with 
a standard set of input cards. 
						

							   Christie Roadster HD10K-M   Optional coarse dust filter    Optional fog juice filter
 Dust sealed engine
Roadster models
 
The Christie M Series Roadster models have been designed 
with stagers in mind. Each of these Roadster models ships 
equipped with more input cards than the other M Series 
models, as well as a stacking frame.
 
Christie AutoStack
 
Christie AutoStack is a software driven, camera-based system 
that enables stacking and blending of projector arrays in a 
fraction of the time it takes to do manually and automates 
the regular maintenance of a blended display. It is designed 
for use on a flat screen and supports various screen sizes 
and aspect ratios, using screen points for quick geometric 
calibration. An optional curve module (sold separately) is  
also available for curved screen applications.
DMX512 interface card
 
This interface card supports the DMX512 communication 
standard through two 5-pin XLR connectors.
Filters (optional)
If the environment you’re working in requires more than the 
protection of our dust sealed engine, choose from one of two 
filters (coarse dust and fog juice). Help extend the life of your 
projector and protect your investment from dirt, dust, sand as 
well as fog, smoke, hazers and pyrotechnics. Each Christie  
M Series projector is equipped with two removable side 
panels that are designed to hold a filter, if required. 
[ 5 ] Dust sealed engine
 
Christie M Series projectors can operate filter-free because  
of dust-sealed engines and optics. Since dust and dirt  
cannot affect the system and filters are not required, image 
quality is maintained and maintenance costs are lower. 
Removable side panels enable the addition of optional 
coarse dust and fog juice filters for projectors that are 
exposed to harsh environments.
Christie YK100
 
All Christie M Series projectors can be used with the 
Christie YK100, a single-arm yoke moving projection 
system, to give you a range of brightness levels  
(6270 to 14,000 center lumens) and resolutions to choose 
from. Each Christie M Series model comes equipped  
with DMX512 capabilities, which makes it easy to use  
with the yoke since this solution can be controlled by  
the same console as your lighting equipment.
These versatile yokes can be flown, rigged or set up  
at floor level, according to your application needs.
 
Portrait display capabilities
 
All Christie M Series projectors have built-in capabilities  
to project in portrait orientation - no additional 
equipment required. Legacy M Series models require 
the latest firmware to enable portrait capabilities. 
   Christie  YK100
ReinFORCe PeRFORMAnCe
6
DeSigneD FOR Live eventS
   The M Series in 
portrait orientation.   
						

							7
innovative high-
performance 3D
When you want crisp and detailed 3D images, think 
Christie Mirage M Series.
Whether using active or passive display technology, 
the Christie Mirage M Series is easy to set up and 
configure. The most compact 3-chip DLP active stereo 
projectors in their class, the Christie Mirage M Series 
delivers visually stunning 3D for boardrooms, home 
theater, museums, education, scientific research,  
virtual prototyping, oil and gas exploration and 
anything in between.
Offering complete compatibility with today’s 3D home 
entertainment requirements, the Christie Mirage 
M Series is ready for Blu-ray 3D™ video, PS3 and 
other gaming consoles and meets the mandatory 3D 
spec for HDMI v1.4a. To ensure your 3D solution is 
complete, Christie also offers a range of accessories 
that include: 3D glasses (active and passive), emitters 
and modulators.
Powered by dual image processing, the Christie 
Mirage M Series displays full resolution at a native 
frame rate up to 120Hz. Two standard Dual-link  
DVI input cards support 330 MHz bandwidth for full 
resolution Dual Input 3D.
For the ultimate home theater including Blu-ray 3D
 
video content, the Christie Mirage M Series uses triple 
flash to provide the best images possible, no matter 
how fast-motion your content might be. You can count 
on Christie to ensure the highest image quality and  
a comfortable theater-like viewing experience.
Active stereoscopic viewing
 
Active stereoscopic displays provide the best 3D imagery 
available today. Active stereo is typically used for applications 
where vivid color reproduction and finite detail are required 
for precise content in key decision making applications. 
Offering the most detailed and life-like 3D images, the 
Christie Mirage M Series supports full resolution at 330 MHz 
and can be used with Christie Mirage 3D active stereoscopic 
accessories, including an emitter and LCD shutter glasses. 
Active single projector versus  
stacked dual projectors
Single, active 3D projection eliminates the need to stack, 
align and color match projectors and continually monitor 
and match brightness of two projectors for consistent left 
eye/right eye display. Typically for comparable brightness, 
single active 3D projection will operate with less noise, heat, 
physical space requirements and consumables along with 
fewer failure points and overall lower power consumption.
Active stereoscopic viewing – multiple projectors
For applications that require a larger display for 1:1 scale 
visuals, you can use multiple Christie Mirage M Series 
projectors blended into a single, larger display.
image generator
active ster
eo DLP projectors
(r ear pro jection)
compatible 
scr een
active ster eo DLP projector
emitter
screen
viewer wearing active glasses
passive 
modulator
active ster
eo DLP projector
compatible
polarized screen
viewer wearing passive glasses
active stereo 60Hz DLP pr ojectors
compatible
polarized screen
image generator image generator
passive 
modulator
viewer wearing passive glasses
viewer wearing active glasses
image generator
emitter
Passive ster eoscopic viewing – single pr ojector
Active stereoscopic viewing – single pr ojectorActive stereoscopic viewing – multiple pr ojectors
Passive stereoscopic viewing – stacked pr ojectors
image generator
active ster
eo DLP projectors
(r ear pro jection)
compatible 
screen
active ster eo DLP projector
emitter
screen
viewer wearing active glasses
passive 
modulator
active ster
eo DLP projector
compatible
polarized screen
viewer wearing passive glasses
active stereo 60Hz DLP pr ojectors
compatible
polarized screen
image generator image generator
passive 
modulator
viewer wearing passive glasses
viewer wearing active glasses
image generator
emitter
Passive ster eoscopic viewing – single pr ojector
Active stereoscopic viewing – single pr ojectorActive stereoscopic viewing – multiple pr ojectors
Passive stereoscopic viewing – stacked pr ojectors
eXCePtiOnAL iMAge QUALitY 
						

							8
ModelCenter lumensResolution
Mirage DS+6K-M 6930
SXGA+
Mirage DS+10K-M 11,550 
SXGA+
Mirage DS+14K-M 14,000
SXGA+
Mirage HD6K-M 6300
1080 HD
Mirage HD10K-M 11,000
1080 HD
Mirage HD14K-M 13,500
1080 HD
Mirage WU7K-M 6930
WUXGA
Mirage WU12K-M 11,550 
WUXGA
Mirage WU14K-M 14,000
WUXGA
Passive stereoscopic viewing
When it comes to 3D for a larger crowd, passive stereoscopic 
displays offer the best return on investment. Using low-cost 
polarized glasses that can be given away or recycled after 
a single use, a passive stereo display is a cost effective way 
to deliver quality 3D images. Combine a silver screen and 
Christie Mirage M Series projectors with Christie Mirage 3D 
accessories, including our passive modulator and circular 
polarized 3D glasses, and you can bring incredible eye-
popping 3D to even the largest of audiences!
image generator
active ster
eo DLP projectors
(r ear pro jection)
compatible 
scr een
active ster eo DLP projector
emitter
screen
viewer wearing active glasses
passive 
modulator
active ster
eo DLP projector
compatible
polarized screen
viewer wearing passive glasses
active stereo 60Hz DLP pr ojectors
compatible
polarized screen
image generatorimage generator
passive 
modulator
viewer wearing passive glasses
viewer wearing active glasses
image generator
emitter
Passive ster eoscopic viewing – single pr ojector
Active stereoscopic viewing – single pr ojectorActive stereoscopic viewing – multiple pr ojectors
Passive stereoscopic viewing – stacked pr ojectorsReinFORCe PeRFORMAnCeeXCePtiOnAL iMAge QUALitY
   University of Reims Champagne-Ardenne (URCA),  
3D display used for scientific research and development 
						

							Provides perspective not possible with traditional 
2D software and tools
Reduces time to market
Excites audiences … WOW! factor
Accelerates understanding and decision making
Enables faster, more intuitive interaction with data
Promotes collaboration and focus on collective strengths
Ensures greater accuracy of concepts and designs
Removes inherent boundaries found in traditional tools
9
3D Accessories
DescriptionPart number
Active stereoscopic Glasses – single
108-407102-XX
Glasses – 5 pack 108-408103-XX
Glasses – 10 pack 108-409104-XX
Emitter 118-406101-XX
Passive stereoscopic Glasses – single    
108-412108-XX
DepthQ polarization modulator 108-411107-XX
   Christie 3D active glasses Christie 3D passive glasses
   Emitter  (active)   Modulator  (passive)
Benefits of 3D
Proven 3D technology
 
With over a three-decade history of development
and integration of 3D displays, Christie offers the 
benefit of experience. Evolving from original  
CRT-based technology, we developed a truly  
game-changing 3D display with the world’s first 
purpose-built 3-chip DLP active stereo projector  
line – Christie Mirage. Christie Mirage is a full 3D
display product line that offers a range of brightness 
levels, resolutions and active or passive stereoscopic 
options that enable 3D displays to be used in  
any application.
CHRiStie 3D