Christie Projector Mirage J Series User Manual

Mirage J Series
User Manual
020-100708-01 

Mirage J Series
User Manual
020-100708-01 

NOTICES 
COPYRIGHT AND TRADEMARKS 
© 2011 Christie Digital Systems USA, Inc. - All rights reserved.
All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.
REGULATORY
The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful interference when the product is operated in a commercial environment. The...

                             Table of Contents
Mirage J Series User Manuali020-100708-01  Rev. 1   (11-2011)
1: Introduction
1.1 Projector Overview ...................................................................................................................... 1-1
2: Operation
2.1 3D ................................................................................................................................................ 2-1
A: Menu Tree
A.1 Mirage J Series Menu Tree...

Mirage J Series User Manual1-1020-100708-01 Rev. 1  (11-2011)
1 Introduction
Every effort has been made to ensure the information in this document is accurate and reliable; however,
due to constant research the information in this document is subject to change without notice.
1.1 Projector Overview
The Mirage J Series projectors provide a powerful combination of high resolution video/graphics, 3 chip 1080p 
HD, SXGA+, and WUXGA resolutions, high brightness and high contrast ratios to produce flawless,...

Mirage J Series User Manual2-1020-100708-01  Rev. 1  (11-2011)
2 Operation
2.1 3D 
The Mirage J Series projector is capable of displaying stereoscopic 3D video sources. The Mirage J Series 
relies on additional hardware; such as stereo emitters and glasses to complete the display system. 
Images generated from a stereo 3D-video source consist of a series of images (frames) that alternate quickly 
between two slightly different view points, corresponding to your left and right eye. When these frames are...

2-2Mirage J Series User Manual020-100708-01  Rev. 1   (11-2011)
Section 3: Operation
CONNECTING THE 3D STEREO SYNC CABLE
This GPIO cable provides the means for synchronizing the various components in your 3D system. Your 
source, projector display output, and emitters or 3D passive filter system can then operate together with 
precision to minimize cross-talk and color artifacts. Connect as shown below.
NOTE: For Mirage J Series models, inputs A and B are not required, but recommended to ensure that...