Christie Projector LWU421 User Manual

39Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3.1.11 Remote Control
The functions on the bundled remote control are 
assigned to the Web Remote Control screen.
Do not attempt to control the projector with the 
projector's remote control and via Web Remote 
Control at the same time. It may cause some 
operational errors in the projector.
Item Description
STANDBY Assigned the same operation as  STANDBY button.
ON Assigned the same operation as  ON button....

40Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3. Web Control
3.1 Projector Web Control - Remote Control (continued)
• The Web Remote Control does not support repeat function that 
performs an action while holding a button clicked down.
• Since the repeat function is not available, click the button repeatedly as many 
times as you require.
• 
Even if you hold the button clicked down for a while, the Web Remote Control 
sends your request command one time only....

41Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3.1.12 Projector Status
Displays the settings and status of the projector.
Item Description
Error Status Displays the current error status
Lamp Time Displays the usage time for the current lamp.
Filter Time Displays the usage time for the current filter.
Filter Status Displays the current cleanliness level of the air filter.
Power Status Displays the current power status.
Input Status Displays the current input signal...

42Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3. Web Control
The Main window as shown above is 
displayed at first. However, if you have 
enabled User Password on the Tools window 
(
&46), a dialog prompting you to enter 
the password as shown on the right will be 
displayed, and no operation is enabled until 
you have entered the password. After entering 
the preset password, the dialog disappears 
and the Main window will be displayed.
As shown below, you can...

43Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3. Web Control
3.2 Crestron e-Control® (continued)
3.2.1 Main window
You can operate the basic controls of the projector on this screen.
• If the projector is in the standby mode, only the  [Power] button can 
be operated. NOTE
1 Click a button and operate as follows.
Button Description
Power Turns the power on/off.
Vol -/ Vol + Adjusts the volume setting.
Mute Turns the audio mute on/off.
2  Sources List 
You can...

44Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3. Web Control
3.2 Crestron e-Control® - Main window (continued)
3   Click a button and operate as follows. To show the hidden buttons, click the ◄ / 
► icons at the left and right ends.
Button Description
Freeze Turns Freeze on/off.
Contrast Adjusts the contrast setting.
Brightness Adjusts the brightness setting.
Color Adjusts the color setting.
Sharpness Adjusts the sharpness setting.
Magnify Controls the...

45Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3. Web Control
3.2 Crestron e-Control® (continued)
3.2.2 Tools window
Configures the settings between the projector and Crestron
® control system.
Click the [Exit] button to return to the Main window.
1   Crestron Control 
Configures the settings of Crestron
® control system devices.
Item Description
IP Address Configures the IP address of the control system.
IP ID Configures the IP ID of the control system.
Port...

46Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3. Web Control
3.2 Crestron e-Control® - Tools window (continued)
3    
Projector (continued)  
Configures the network settings of the projector.
Item Description
DHCP Enables DHCP.
IP Address Configures the IP address when DHCP is disabled.
Subnet Mask Configures the subnet mask when DHCP is disabled.
Default Gateway Configures the default gateway when DHCP is disabled.
DNS Server Configures the DNS server address.
To...

47Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3. Web Control
3.2 Crestron e-Control® (continued)
3.2.3 Info window
Displays the settings and status of the projector.
Click the [Exit] button to return to the Main window.
1   Projector Information
Item Description
Projector Name Displays the projector name settings.
Location Displays the location name of the projector.
MAC Address Displays the wired LAN MAC address of the projector.
Resolution Displays the...

48Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3. Web Control
3.2 Crestron e-Control® (continued)
3.2.4 Help Desk window
Sends/receives messages to/from the administrator for Crestron RoomV iew® 
Express.
Button Description
Send Sends a message.
Check the received message.