Christie Projector LW751i User Manual
Have a look at the manual Christie Projector LW751i User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 476 Christie manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
60LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
EASY MENU
EASY MENU
Select an item form the EASY menu using the ▲/▼
cursor buttons. Then perform it according to the
following table.
Item Description
ASPECT Using the ◄/► buttons switches the mode for aspect ratio.
See the ASPECT item in SIZE AND POSITION menu (
66).
KEYSTONE Pressing the ► button displays the KEYSTONE dialog.
See the KEYSTONE item in SETUP menu (
74).
3D KEYSTONEPressing the ► button displays the 3D KEYSTONE dialog.
See the 3D KEYSTONE item in SETUP menu (74).
PICTURE MODE Using the ◄/► buttons switches the picture mode.
The picture modes are combinations of GAMMA and COLOR TEMP
settings. Choose a suitable mode according to the projected source.
STANDARD ó NATURAL
ó CINEMA
ó DYNAMIC
USER-3 BOARD(BLACK)
USER-2 BOARD(GREEN)
USER-1 ó DICOM SIM.
ó DAYTIME
ó WHITEBOARD
• Lines or other noise might appear on the screen when this function
is operated, but it is not a malfunction.
• DICOM SIM. is the projector's DICOM
® ("Digital Imaging and
Communication in Medicine") simulation mode. This mode
simulates the DICOM standard, which is a standard applicable to
digital communications in medicine, and can be useful for displaying
medical images, such as X-rays photos. This projector is not a
medical device and is not compliant to the DICOM standard, and
neither the projector nor the DICOM SIM. mode should be used for
medical diagnosis.
(continued on next page)
61LWU701i/LW751i/LX801i/LWU601i/LW651i User's Manual - Operating Guide020-000786-02 LIT MAN USR D2 EASY MENU Item Description ECO MODE Using the ◄/► buttons turns off/on the Eco mode. See the ECO MODE item in SETUP menu ( 75). INSTALLATION Pressing the ► button displays the INSTALLATION dialog. See the INSTALLATION item in SETUP menu ( 77). RESET Selecting this item resets all of the EASY MENU items except the FILTER HOURS and LANGUAGE. A dialog is displayed for confirmation. Selecting the OK using the ► button performs resetting. FILTER HOURS The usage time of the air filter is shown in the menu. Selecting this item resets the filter hours which counts usage time of the air filter. A dialog is displayed for confirmation. Selecting OK using the ► button initiates the reset. See the FILTER HOURS item in SETUP menu ( 76). LANGUAGE Using the ◄/► buttons changes the display language. See the LANGUAGE item in MENU PREFERENCES ( 81). ADVANCED MENUPress the ► or ENTER button to use the menu of IMAGE SETTINGS, SIZE AND POSITION, INPUT, SETUP, AUDIO, MENU PREFERENCES, OPTION, NETWORK or SECURITY. EXIT Press the ◄ or ENTER button to close the OSD menu.
62LWU701i/LW751i/LX801i/LWU601i/LW651i User's Manual - Operating Guide020-000786-02 LIT MAN USR D2 IMAGE SETTINGS menu IMAGE SETTINGS menu Select an item from the Image Settings menu using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description BRIGHTNESS Using the ◄/► buttons adjusts the brightness. Dark ó Light CONTRAST Using the ◄/► buttons adjusts the contrast. Weak ó Strong COLOR Using the ◄/► buttons adjusts the strength of whole color. Weak ó Strong TINT Using the ◄/► buttons adjusts the tint. Reddish ó Greenish SHARPNESS Using the ◄/► buttons adjusts the sharpness. Weak ó Strong • There may be some noise and/or the screen may flicker for a moment when an adjustment is made. This is not a malfunction. DYNAMIC IRIS Using the ▲/▼ cursor buttons changes the dynamic iris control mode. PRESENTATION ó THEATER ó OFF PRESENTATION : The dynamic iris displays the best presentation image for both bright and dark scenes. THEATER : The dynamic iris displays the best theater image for both bright and dark scenes. OFF : The dynamic iris is always open. • The screen may flicker when the PRESENTATION or THEATER modes are selected. If this occurs, select OFF. (continued on next page)
63LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
IMAGE SETTINGS menu
Item Description
PICTURE QUALITY Selecting this item displays the PICTURE
QUALITY menu.
Select an item using the ▲/▼ buttons,
and press the ► button or the ENTER
button on the remote control to execute
the item.
PICTURE MODE
STANDARD ó NATURAL
ó CINEMA
ó DYNAMIC
USER-3 BOARD(BLACK)
USER-2 BOARD(GREEN)
USER-1 ó DICOM SIM.
ó DAYTIME
ó WHITEBOARD
After selecting USER-1 / USER-2 / USER-3, the following features
are adjustable.
Gamma, Color Temp
GAMMA
This feature is only available when USER-1 / USER-2 / USER-3 is
selected.
Using the ▲/▼ buttons switches the gamma mode. DEFAULT-1 ó CUSTOM-1
ó DEFAULT-2
ó CUSTOM-2
CUSTOM-8 DEFAULT-3
DEFAULT-8 CUSTOM-3
CUSTOM-7 DEFAULT-4
DEFAULT-7 CUSTOM-4
CUSTOM-6 ó DEFAULT-6
ó CUSTOM-5
ó DEFAULT-5
(continued on next page)
64LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
IMAGE SETTINGS menu
Item Description
PICTURE QUALITY
(continued) GAMMA (continued)
Selecting a mode whose name includes CUSTOM and then
pressing the ► button or the ENTER button displays
a dialog to help you in adjusting the mode. This function is useful
when you want to change the brightness of particular tones.
Choose an item using the ◄/► buttons, and adjust the level using
the ▲/▼ buttons.
• Lines or other noise might appear on the screen when this function
is operated, but it is not a malfunction.
COLOR TEMP
This feature is only available when USER-1 / USER-2 / USER-3 is
selected.
Using the ▲/▼ buttons switches the color temperature mode.
HIGH
ó
CUSTOM-1
ó
MID-1
ó
CUSTOM-2
CUSTOM-7 MID-2
HIGHBRIGHT-3 CUSTOM-3
CUSTOM-6 LOW
HIGHBRIGHT-2 ó CUSTOM-5
ó HIGHBRIGHT-1
ó CUSTOM-4
Selecting a mode whose name includes CUSTOM and then pressing
the ► button or the ENTER button displays a dialog to aid you in
adjusting the OFFSET and GAIN of the selected mode.
OFFSET adjustments change the color intensity on the whole tones.
GAIN adjustments mainly affect color intensity on the brighter tones.
Choose an item using the ◄/► buttons, and adjust the level using
the ▲/▼ buttons.
• Lines or other noise might appear on the screen when this function
is operated, but it is not a malfunction.
(continued on next page)
65LWU701i/LW751i/LX801i/LWU601i/LW651i User's Manual - Operating Guide020-000786-02 LIT MAN USR D2 IMAGE SETTINGS menu Item Description PICTURE QUALITY (continued) eClarity eClarity is a function to improve the legibility. Using the ◄/► buttons adjusts the sharpness. Weak ó Strong • There may be some noise and/or the screen may flicker for a moment when an adjustment is made. This is not a malfunction. • This function may not work properly when HDCR LiteLoc is enabled. HDCR A function to show a clear picture in a bright room. Using the◄/► buttons adjusts the contrast. • This function may not work properly when HDCR LiteLoc is enabled. Advanced Color Adjustment A function to adjust color phase, color saturation, and brightness respectively for red, yellow, green, cyan, blue, and magenta. MY MEMORY This projector has four memories for adjustment data (for all the items of the IMAGE SETTINGS menu). Selecting a function using the ▲/▼ buttons and pressing the ► or ENTER button performs each function. SAVE-1 ó SAVE-2 ó SAVE-3 ó SAVE-4 LOAD-4 ó LOAD-3 ó LOAD-2 ó LOAD-1 SAVE-1, SAVE-2, SAVE-3, SAVE-4 Performing a SAVE function saves the current adjustment data into the memory linked in the number included in the function’s name. • Remember that the current data being stored of a memory is lost by saving new data into the memory. LOAD-1, LOAD-2, LOAD-3, LOAD-4 Performing a LOAD function loads the data from the memory linked in the number included in the function’s name, and adjusts the picture automatically depending on the data. • The LOAD functions whose linked memory has no data are skipped. • Remember that the current adjusted condition is lost by loading data. To keep the current adjustment, save it before performing a LOAD function. • There may be some noise and the screen may flicker for a moment when loading data. This is not malfunction. • You can perform the LOAD function using MY BUTTON. See MY BUTTON item in OPTION menu ( 89).
66LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
SIZE AND POSITION menu
SIZE AND POSITION menu
Select an item from the Size and Position menu
using the ▲/▼ cursor buttons, and press the ►
cursor button or ENTER button to execute the item.
Then perform it according to the following table. for
selected port
Item Description
ASPECT Using the ▲/▼ buttons switches the mode for aspect ratio.
For a computer signal
LX801i:
NORMAL ó 4:3
ó 16:9
ó 16:10
LWU601i, LW651i, LWU701i, LW751i:
NORMAL ó 4:3
ó 16:9
ó 16:10
ó NATIVE
For HDMITM, HDBaseT™, and DisplayPort signals
LX801i:
NORMAL ó 4:3
ó 16:9
ó 16:10
ó 14:9
LWU601i, LW651i, LWU701i, LW751i:
NORMAL ó 4:3
ó 16:9
ó 16:10
ó 14:9
ó NATIVE
For a video signal
LX801i:
4:3 ó 16:9
ó 14:9
LWU601i, LW651i, LWU701i, LW751i:
4:3 ó 16:9
ó 16:10
ó 14:9
ó NATIVE
For an SDI signal
(LWU701i only)
NORMAL ó 4:3
ó 16:9
For an input signal from the LAN port, or if there is no signal
LX801i: 4:3 (fixed)
LWU601i, LW651i, LWU701i, LW751i: 16:10 (fixed)
• The NORMAL mode keeps the orig inal aspect ratio of the signal.
(continued on next page)
67LWU701i/LW751i/LX801i/LWU601i/LW651i User's Manual - Operating Guide020-000786-02 LIT MAN USR D2 SIZE AND POSITION menu Item Description OVER SCAN Using the ◄/► buttons adjusts the over-scan ratio. Small (It magnifies picture) ó Large (It reduces picture) • This item can be selected for a video signal and an SDI signal. • For HDMITM, HDBaseTTM, and DisplayPort signals, this item can also be selected if either (1) or (2) applies. (1) DIGITAL FORMAT item in the INPUT menu for selected port is set to VIDEO. (2) DIGITAL FORMAT item in the INPUT menu for selected port is set to AUTO, and the projector recognizes that it receives video signals. V POSITION Using the ◄/► buttons adjusts the vertical position. Down ó Up • Over-adjusting the vertical position may cause noise to appear on the screen. If this occurs, reset the vertical position to the default setting. Pressing the RESET button when the V POSITION is selected resets the V POSITION to the default setting. • When this function is performed on a video signal, the range of this adjustment depends on OVER SCAN ( above) setting. You cannot adjust when OVER SCAN is set to 10. • This function is unavailable for a signal from the LAN, HDMI 1 / 2, HDBaseT, DisplayPort, or SDI port. H POSITION Using the ◄/► buttons adjusts the horizontal position. Right ó Left • Over-adjusting the horizontal position may cause noise to appear on the screen. If this occurs, reset the horizontal position to the default setting. Pressing the RESET button when the H POSITION is selected resets the H POSITION to the default setting. • When this function is performed on a video signal, the range of this adjustment depends on OVER SCAN ( above) setting. You cannot adjust when OVER SCAN is set to 10. • This function is unavailable for a signal from the LAN, HDMI 1 / 2, HDBaseT, DisplayPort, or SDI port. (continued on next page)
68LWU701i/LW751i/LX801i/LWU601i/LW651i User's Manual - Operating Guide020-000786-02 LIT MAN USR D2 SIZE AND POSITION menu Item Description H PHASE Using the ◄/► buttons adjusts the horizontal phase to eliminate flicker. Right ó Left • This item can be selected only for a computer signal or a component video signal. This function is unavailable for a signal from the LAN, HDMI TM 1 / 2, HDBaseTTM, DisplayPort, or SDI port. H SIZE Using the ◄/► buttons adjusts the horizontal size. Small ó Large • This item can be selected only for a computer signal. This function is unavailable for a signal from the LAN, VIDEO, HDMI 1 / 2, HDBa- seT, DisplayPort, or SDI port. • When this adjustment is excessive, the picture may not be displayed correctly. If this occurs, reset the adjustment by pressing the RESET button on the remote control during this operation. • Images might appear degraded when this function is operated, but it is not a malfunction. AUTO IMAGE Selecting this item performs the automatic adjustment feature. For a computer signal The vertical position, the horizontal position and the horizontal phase are automatically adjusted. Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting. For a video signal The video format best suited for the respective input signal is selected automatically. This function is available only when the AUTO is selected for the VIDEO FORMAT item in the INPUT menu ( 70). The vertical position and horizontal position are automatically set to the default. • The automatic adjustment operation requires approx. 10 seconds. Note that it may not function correctly with some input. • When this function is performed for a video signal, an extra line may appear outside a picture. • When this function is performed for a computer signal, a black frame may be displayed on the edge of the screen, depending on the computer model. • The items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu ( 93).
69LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
INPUT menu
INPUT menu
Select an item from the Input menu using the ▲/▼
cursor buttons, and press the ► cursor button or
ENTER button to execute the item. Then perform it
according to the following table.
Item Description
PROGRESSIVE Using the ▲/▼ buttons switches the progress mode.
TV ó FILM
ó OFF
• This function works only for a video signal, component video signal (of
480i@60 or 576i@50 or 1080i@50/60), an HDMITM signal (of 480i@60
or 576i@50 or 1080i@50/60) and HDBaseTTM signal (of 480i@60 or
576i@50 or 1080i@50/60).
• When TV or FILM is selected, the screen image is sharp. FILM
adapts to the 2-3 Pull-Down conversion system. But these may
cause a certain defect (for example, jagged line) of the picture for
a quick moving object. If this occurs, select OFF, even if the screen
image loses sharpness.
VIDEO NR Using the ▲/▼ buttons switches the noise reduction mode.
HIGH ó MID
ó LOW
• This function works only for a video signal, component video signal (of
480i@60 or 576i@50 or 1080i@50/60), an HDMITM signal (of 480i@60
or 576i@50 or 1080i@50/60) and HDBaseTTM signal (of 480i@60 or
576i@50 or 1080i@50/60).
COLOR SPACE Using the ▲/▼ buttons switches the mode for color space.
AUTO ó RGB
ó SMPTE240
ó REC709
ó REC601
• This item can be selected only for a computer signal (except for
signals from the LAN and HDBaseT ports).
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work correctly at some signals. If
this occurs, select a suitable mode except AUTO.
(continued on next page)