Christie Projector LW651i User Manual

							90LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
OPTION menu
Item Description
MY BUTTON (continued)
eClarity: Turns on/off the eClarity dialog ( 65).
HDCR: Turns on/off the HDCR dialog (65).
STATUS MONITOR: Turns on/off the back light of status monitor  (
 31). This function is unavailable when POWER SAVE is selected 
in STANDBY MODE while the projector is in the standby mode.
SCHEDULE
■ How to setup the item
1. Use the ▲/▼/◄/► cursor buttons to select or adjust.
2. Select OK to finish the settings.
(continued on next page)
■ How to activate (DATE AND TIME / SPECIFIC DATE)
Place a checkmark in the box.
Checkmark 
in the box
Date and first 
setup info could 
be seen with the 
check mark.
Item Description
DATE & TIME Set the DATE (Year/Month/Date) and Time (24-
hour scale).
SPECIFIC DATE 
Set specific date from 1 to 10.
PROGRAM EDIT The TIME and EVENT for Program 1 to 16 
can be editted.
・
 Refer to the actual on-screen display(OSD) for 
appropriate operation.NOTE
1/2 page (Set the DATE(Year/Month/Date) and Time(24-hour scale).) 
						

							91LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
OPTION menu
Item Description
SCHEDULE  (continued)
■ PROGRAM EDIT
The TIME and EVENT for Program 1 to 16 can be editted.
• RETURN
Select this to return to 
the top menu of the 
SCHEDULE.
• SELECT
Select from PROGRAM-01 
 to 16 to edit. 
Each PROGRAM can be 
 setup up to 20 settings.
• COPY TO
The selected program 
(with the settings of TIME 
and EVENT) can be 
copied to other program.
• APPLY
Select this to apply and 
save all adjustments and 
settings.
(continued on next page)
Checkmark 
in the box
Date and first 
setup info could 
be seen with the 
check mark.
2/2 page (Set specific date from 1 to 10.) 
						

							92LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
OPTION menu
Item Description
SCHEDULE  (continued)
■ How to edit the selected PROGRAM
1.   Select from 1 to 20 events.  
Use the ▲/▼ cursor buttons to select.  
Press ► cursor button to set the TIME and EVENT.
2. Use the ◄/► cursor   
buttons to select.
3. Use the ▲/▼ cursor   
buttons to adjust.
EVENT can be selected as listed below.
◦ POWER − ON, STANDBY
◦ INPUT SOURCE − "input source"channel
◦ MY IMAGE − IMAGE-1 to 4, IMAGE OFF
◦ MESSENGER − TEXT-1 to 12, TEXT OFF
◦   ECO MODE −   NORMAL, ECO
◦ BLANK − ON, OFF
4. Press ► cursor button to finish the settings. 
5.   Select APPLY to save the settings.
(continued on next page)
・ Refer to the on-screen display(OSD) for the 
appropriate operation.NOTE 
						

							93LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
OPTION menu
Item Description
SERVICE Selecting this item displays the SERVICE 
menu.
Select an item using the ▲/▼ buttons, 
and press the ► button or the ENTER 
button on the remote control to execute 
the item.
ALTITUDE
Using the ▲/▼ buttons switches the rotation speed of the cooling 
fans. It is recommended to leave it at AUTO.
HIGH-2  ó HIGH-1 
ó NORMAL 
ó AUTO 
AUTO:  The projector changes the rotation speed automatically to  suit the altitude and other environmental factors. 
Choose an option below when there is a trouble with the 
AUTO mode.
NORMAL:  This mode can be used below 1600m (5250ft.).
HIGH-1:  This mode can be used between 1600 to 2300m (5250 to  7550ft.).
HIGH-2:  This mode can be used above 2300m (7550ft.).
AUTO ADJUST
Using the ▲/▼ buttons to select one of the mode. When the 
DISABLE is selected, the automatic adjustment feature is disabled.
FINE  ó FAST 
ó DISABLE
   
FINE: Finer tuning including H.SIZE adjustment.
FAST:  Faster tuning, setting H.SIZE to prearranged data for the 
input signal.
• Depending on conditions, such as input image, signal cable to 
the projector, environment around the projector, and so on, the 
automatic adjustment may not work correctly.  If this occurs, choose 
DISABLE to disable the automatic adjustment, and make the 
adjustment manually.
(continued on next page) 
						

							94LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
OPTION menu
Item Description
SERVICE
(continued) LENS TYPE
(1)  Select the lens type currently used using the ▲/▼ buttons and 
press the ► or ENTER button. If AUTO is selected, the projector 
determines the lens type automatically. 
(2)  A message dialog is displayed for confirmation. Press the ► or  ENTER button to save the lens type.
• This setting has an influence on the keystone distortion and so on.
• The lens type determined by the projector is displayed on the right 
of "AUTO".
• If the projector cannot determine the lens type automatically when 
this item is set to AUTO, "UNKNOWN LENS" is displayed on the 
right of "AUTO". 
• For information about the optional lens, contact your dealer.
LENS LOCK
Using the ▲/▼ buttons turns on/off the lens lock feature. When ON 
is selected, the buttons (ZOOM, ZOOM +  / -, FOCUS + /  -, LENS 
SHIFT, LENS MEMORY) are locked.
ON  ó OFF
(continued on next page) 
						

							95LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
OPTION menu
Item Description
SERVICE
(continued) KEY LOCK
(1)  Use the ▲/▼ buttons to choose the operations control.
CONTROL PANEL  ó REMOTE CONTROL
(2)  Use the ◄/► buttons to select ON or  OFF.
ON  ó OFF
Selecting ON in Step 2 locks the buttons except  STANDBY, ON 
and STANDBY/ON on the operations control selected in Step 1. 
Selecting OFF releases the locked buttons on the operations control 
selected in Step 1.
• Use this function to prevent tampering or accidental operation. 
• You cannot disable both options at the same time.
REMOTE RECEIV.
(1)  Select a remote sensor using the ▲/▼ button.
FRONT  ó REAR 
ó HDBaseT 
(2)  Switch it using the ◄/► button. ON ó OFF
• When one sensor is turned off, the other cannot be turned off. 
REMOTE FREQ.
(1)  Use the ▲/▼ button to change the projector's remote sensor  frequency setting (
4, 29).
1:NORMAL  ó 2:HIGH
(2)  Use the ◄/► button to change the  projector's remote sensor on or off.
ON  ó OFF
The factory default setting is for both 1:NORMAL and 2:HIGH to be 
on. If the remote control does not function correctly, disable either of 
them.
• You cannot disable both options at the same time.
REMOTE ID
Use the ▲/▼ buttons on the REMOTE ID menu to select ID and 
press the ► button. ALL  ó 1 
ó 2 
ó 3 
ó 4 
The projector is controlled by the remote control whose  ID button 
is set the same number as this number. When the ALL is selected, 
the projector is controlled by a remote control irrespective of the ID 
setting.
(continued on next page) 
						

							96LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
OPTION menu
Item Description
SERVICE
(continued)
COMMUNICATION
Selecting this item displays COMMUNICATION 
menu. 
In this menu, you can configure the serial 
communication settings of the projector using the 
CONTROL port.
• Select an item using the cursor buttons ▲/▼. 
Then pressing the ► button opens the submenu 
for the setting item you selected. Or, pressing 
the ◄ button instead of the ► button makes the 
menu back to the previous one without changing 
the setup. Each submenu can be operated as 
described above.
• When COMMUNICATION TYPE (
 below) is 
set to OFF, the other items except STACK in 
COMMUNICATION menu are invalid.
• For the function of serial communication, refer to  
the Network Guide.
COMMUNICATION TYPE
Select the communication type for transmission 
using the CONTROL port.
NETWORK BRIDGE (WIRELESS) 
   
NETWORK BRIDGE (WIRED) 
   
  OFF
NETWORK BRIDGE: Select this type, if it is  required to control an external device as a 
network terminal, using this projector from the 
computer. Select WIRELESS or WIRED as your 
network connection mode.
The CONTROL port does not accept RS-232C  
commands (
 7. Network Bridge Function
 in 
the Network Guide).
OFF: Select this mode to receive RS-232C  commands using the  CONTROL port. 
• OFF is the default setting. 
• When you select the NETWORK BRIDGE, check 
the item, TRANSMISSION METHOD (
 97).
(continued on next page) 
						

							97LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
OPTION menu
Item Description
SERVICE
(continued)
COMMUNICATION (continued)
SERIAL SETTINGS
Select the serial communication condition for the 
CONTROL port.
BAUD RATE 4800bps  ó 9600bps 
ó 19200bps 
ó 38400bps
      
 PARITY
NONE  ó ODD 
ó EVEN
    
• The BAUD RATE is fixed to 19200bps and PARITY 
is fixed NONE when the COMMUNICATION TYPE 
is set to OFF
 ( 96).
TRANSMISSION METHOD
Select the transmission method for communication by 
the NETWORK BRIDGE from the 
CONTROL port.
HALF-DUPLEX 
ó FULL-DUPLEX
HALF-DUPLEX: This method lets the projector  make two way communication, but only one 
direction, either transmitting or receiving data, is 
allowed at a time.
FULL-DUPLEX: This method lets the projector  make two way communication, transmitting and 
receiving data at the same time.
• HALF-DUPLEX is selected as the default setting.
• If you select HALF-DUPLEX, check the setting of 
the item RESPONSE LIMIT TIME (
 98).
(continued on next page) 
						

							98LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
OPTION menu
Item Description
SERVICE
(continued)
COMMUNICATION (continued)
RESPONSE LIMIT TIME
Select the time period to wait for receiving 
response data from other device communicating by 
the NETWORK BRIDGE and the HALF-DUPLEX 
through the CONTROL port.
OFF  ó 1s 
ó 2s 
ó 3s
    
OFF: Select this mode if it is not required to check  the responses from the device that the projector 
sends data to. In this mode, the projector can 
send out data from the computer continuously.
1s /2s /3s: Select the time period to keep the  projector waiting for response from the device 
that the projector sends data to. While waiting a 
response, the projector does not send out any 
data from the CONTROL port.
• This menu is available only when the NETWORK 
BRIDGE is selected for the COMMUNICATION 
TYPE and the HALF-DUPLEX is selected for the 
TRANSMISSION METHOD (
 97).
• OFF is selected as the default setting.
STACK
Selecting this item displays the STACK menu. For 
more information, see the  Instant Stack Guide. 
• When STACK MODE is set to MAIN or SUB, 
the other items in COMMUNICATION menu are 
invalid.
(continued on next page) 
						

							99LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
OPTION menu
Item Description
SERVICE
(continued) INFORMATION
Selecting this item displays a dialog titled “INPUT_INFORMATION”. 
It shows the information about the current input.
• The “FRAME LOCK” message on the dialog means the frame lock 
function is working. 
• This item cannot be selected for no signal and sync out.
• When the MY TEXT DISPLAY is set to ON, the MY TEXT is 
displayed together with the input information in the  
INPUT_INFORMATION box (

106).
FACTORY RESET
Selecting OK using the ► button performs this function. By this 
function, all menu items are collectively returned to the initial 
setting. Note that the items LAMP HOURS, FILTER HOURS, 
LANGUAGE,  AUTO BLANK,  FILTER MESSAGE, STANDBY MODE, 
COMMUNICATION, NETWORK and SECURITY settings are not 
reset.
CANCEL  ð OK