Christie Projector DWU850-GS User Manual

   Operation
GS Series User Manual61
020-001044-02 Rev. 1 (07-2016)
Configuring Christie Presenter
Set the language for Christie Presenter, the region  size of fixed size capture mode, if a notification 
message dialog is allowed, the quality of JPEG  images, YUV sample formats, and the network port 
setting.
1. To configure Christie Presenter for basic and advanced settings, click  .
TabDescription
Basic Setting Selects the language, changes the region size of fixed size capture mode, and selects if a...

   Operation
GS Series User Manual62
020-001044-02 Rev. 1 (07-2016)
Managing all connected network displays
You can manage all connected network displays and users at the same time.
1. To control all users connected to the same projector, click  .
IconDescription
Indicates the administrator is logged in.
Indicates a normal user logged in.
Indicates the device is connected.
Indicates the device is not connected.
Shows the current status and display position of th e local screen on the network display....

   Operation
GS Series User Manual63
020-001044-02 Rev. 1 (07-2016)
Operating the Card Reader
The Card Reader application has four available operation modes:
• USB Flash Devices Detection screen
• Thumbnail Display mode
• Images Display mode
• Images Slide Show mode
USB Flash Device Detection screen
In this mode, the Card Reader application dete cts any USB flash devices hot-plug events and 
displays the flash device icon. When the flash device is removed from USB, the icon disappears. 
Christie...

   Operation
GS Series User Manual64
020-001044-02 Rev. 1 (07-2016)
Image Display mode
1. In the Thumbnail Display mode, to enter the Image Display mode, press  ENTER. 
2. To display the last or next image in the Image Display mode, use the  Left and  Right  keys. 
3. To exit Image Display mode and retu rn to Thumbnail Display mode, press ENTER.
4. To display an image in the Image Display mode use the operation UI.  The following operations are supported in the operation UI.
Next Moves the selected item...

   Operation
GS Series User Manual65
020-001044-02 Rev. 1 (07-2016)
Image Slide Show mode
1. In the Thumbnail Display mode, to enter the Slide Show mode, press  SlideShow. 
2. In the Slide Show mode, to enter the Image Display Mode, press  ENTER.
3. To display an image in the Slide Show mode use the operation UI.
The following operations are supported in the Slide Show Mode operation UI.
When the image cannot be displayed due to a me mory limitation or an unsupported image format, 
the specific image is...

GS Series User Manual66
020-001044-02 Rev. 1 (07-2016)
Troubleshooting
If you cannot resolve an issue using the information provided in this section, contact your reseller 
or service center.
No image appears on screen
The image does not appear on the screen.
Resolution
• Make sure all the cables and power connections are correctly and securely connected.
See  Installation  on page 18 for more details.
• Make sure the projector is switched on.
Incorrectly displayed image
The image is partial, is...

   Troubleshooting
GS Series User Manual67
020-001044-02 Rev. 1 (07-2016)
d. Click  Show all devices . 
e. Under the SP box, select  Standard monitor types.
f. Under the Models box, select  the appropriate resolution mode.
g. Verify that the resolution setting of the mo nitor display is lower than or equal to WUXGA 
(1920 × 1200).
If using a Notebook:
1. On control panel or IR remote keypad, press  AUTO.
2. Adjust resolution of the computer.
3. To send signal out from notebook to projector, press the...

   Troubleshooting
GS Series User Manual68
020-001044-02 Rev. 1 (07-2016)
Unstable or flickering images
The image is unstable or is flickering when projected.
Resolution
• To correct the pixels, use Pixel Track and Pixel Phase.
• Change the monitor color setting on your computer.
Vertical flickering bar
The image has a vertical, flickering bar when projected.
Resolution
• To make an adjustment, use  Auto Image.
• Check and reconfigure the display mode of your  graphic card to make it compatible with the...

   Troubleshooting
GS Series User Manual69
020-001044-02 Rev. 1 (07-2016)
Resolution
• If you play 4:3 format DVD titles, change the format to 4:3 in the projector on-screen display.
• If the image is still stretched, adjust the aspect  ratio by setting the display format as 16:9 
(wide) aspect ratio type on your DVD player. For more details, see  Size and Position menu on 
page 29.
Image is not the correct size
The image is too small or too large.
Resolution
• Adjust the lens zoom to fit.
• Verify you...

GS Series User Manual70
020-001044-02 Rev. 1 (07-2016)
Specifications
Learn about the product specifications. Due to continuing research, specifications are subject to 
change without notice.