Christie Projector DHD850-GS User Manual

							   Operation
GS Series User Manual61
020-001044-02 Rev. 1 (07-2016)
Configuring Christie Presenter
Set the language for Christie Presenter, the region  size of fixed size capture mode, if a notification 
message dialog is allowed, the quality of JPEG  images, YUV sample formats, and the network port 
setting.
1. To configure Christie Presenter for basic and advanced settings, click  .
TabDescription
Basic Setting Selects the language, changes the region size of fixed size capture mode, and selects if a  notification message  dialog is allowed.
Advanced 
Setting Selects the quality of JPEG image, YUV sample form
ats and the network port setting. The fixed port 
is port 5900. 
						

							   Operation
GS Series User Manual62
020-001044-02 Rev. 1 (07-2016)
Managing all connected network displays
You can manage all connected network displays and users at the same time.
1. To control all users connected to the same projector, click  .
IconDescription
Indicates the administrator is logged in.
Indicates a normal user logged in.
Indicates the device is connected.
Indicates the device is not connected.
Shows the current status and display position of th e local screen on the network display. Click to 
change the display posi tion. A dialog appears.
Changes the password to the target network displa y. Only an Administrator user can change the 
password.
Does not require a response. If  user logs in as Admin, the key icon is displayed and the 
Presenter password can be changed.  If user log in as Normal, the lock icon is displayed and the 
Presenter password cannot be changed.
Disconnects from the target network display.
Connects to a target networ k display using a web page. 
						

							   Operation
GS Series User Manual63
020-001044-02 Rev. 1 (07-2016)
Operating the Card Reader
The Card Reader application has four available operation modes:
• USB Flash Devices Detection screen
• Thumbnail Display mode
• Images Display mode
• Images Slide Show mode
USB Flash Device Detection screen
In this mode, the Card Reader application dete cts any USB flash devices hot-plug events and 
displays the flash device icon. When the flash device is removed from USB, the icon disappears. 
Christie recommends removing the USB flash devices  only when the Card Reader is changed to the 
USB Flash Devices Detection Screen state.
Thumbnail Display mode
1. To access the Thumbnail Display mode, press the  Enter. 
Different photos in differ ent folders can be chosen. 
2. To access the Card Reader operation UI, press  Menu.
3. Operate the Card Reader application with the  Enter, Left , Right , Up , and  Down  keys.
The following buttons are supported in the user interface:
ButtonDescription
Previous Moves the selected item left or goes to previous page when this is the left-most item. 
						

							   Operation
GS Series User Manual64
020-001044-02 Rev. 1 (07-2016)
Image Display mode
1. In the Thumbnail Display mode, to enter the Image Display mode, press  ENTER. 
2. To display the last or next image in the Image Display mode, use the  Left and  Right  keys. 
3. To exit Image Display mode and retu rn to Thumbnail Display mode, press ENTER.
4. To display an image in the Image Display mode use the operation UI.  The following operations are supported in the operation UI.
Next Moves the selected item righ t or goes to next page when  this is the right most item.
Display Displays the selected image or folder.
Thumbnail Enter the Thumbnail Display mode.
SlideShow Enter the Slide Show mode.
NameOrder Sorts files and folders by name.
ExtendOrder Sorts files and folders by extended order.
SizeOrder Sorts files and folders by size.
TimeOrder Sorts files and folders by time.
EXIF ON/OFF Enables or disables the auto im age rotate accordingly to EXIF information.
FileName ON/OFF Enables or disables the filename display in Thumbnail Display mode.
ButtonDescription
Display Enter the Image Display mode.
Thumbnail Enter the Thumbnail Display mode.
SlideShow Enter the Slide Show mode.
Actual Size Displays the image in actual size.
Best Fit Display the image in a si ze that best fits the screen.
EXIFDisp OFF/On Enables or disables the EXIF information display.
+90deg Rotates the image 90 degrees.
-90deg Rotates the image -90 degrees.
ButtonDescription 
						

							   Operation
GS Series User Manual65
020-001044-02 Rev. 1 (07-2016)
Image Slide Show mode
1. In the Thumbnail Display mode, to enter the Slide Show mode, press  SlideShow. 
2. In the Slide Show mode, to enter the Image Display Mode, press  ENTER.
3. To display an image in the Slide Show mode use the operation UI.
The following operations are supported in the Slide Show Mode operation UI.
When the image cannot be displayed due to a me mory limitation or an unsupported image format, 
the specific image is displayed on the center of the screen.
ButtonDescription
Stop Stops Slide Show mode.
Next Displays the next image.
Previous Displays the previous image.
Delay 3/4/5 Sets a slide show delay in seconds.
Slide Effect Supports for the following slide effects:
• Slide Right
• Blocks
• RightDown
• XLines
• Slide Up
• Ylines
Repeat ON/OFF Enables or disabl es Slide Show Repeat mode. 
						

							GS Series User Manual66
020-001044-02 Rev. 1 (07-2016)
Troubleshooting
If you cannot resolve an issue using the information provided in this section, contact your reseller 
or service center.
No image appears on screen
The image does not appear on the screen.
Resolution
• Make sure all the cables and power connections are correctly and securely connected.
See  Installation  on page 18 for more details.
• Make sure the projector is switched on.
Incorrectly displayed image
The image is partial, is scrolling, or  is otherwise incorrectly displayed.
Resolution
If using a PC (for Windows 95, 98, 2000, XP, Windows 7):
1. On control panel or IR remote keypad, press  AUTO.
2. Select  My Computer  > Control Panel .
3. Double-click  Display.
4. Select the  Settings tab.
5. Verify your display resolution setting is  lower than or equal to WUXGA (1920 × 1200).
6. Click  Advanced Properties. 
7. If the projector is still not projecting the entire image, change the monitor display:
a. Verify the resolution setting is lowe r than or equal to WUXGA (1920 × 1200).
b. Switch to the  Monitor tab.
c. Click  Change. 
						

							   Troubleshooting
GS Series User Manual67
020-001044-02 Rev. 1 (07-2016)
d. Click  Show all devices . 
e. Under the SP box, select  Standard monitor types.
f. Under the Models box, select  the appropriate resolution mode.
g. Verify that the resolution setting of the mo nitor display is lower than or equal to WUXGA 
(1920 × 1200).
If using a Notebook:
1. On control panel or IR remote keypad, press  AUTO.
2. Adjust resolution of the computer.
3. To send signal out from notebook to projector, press the keys listed below for your Notebook  manufacturer (for example, [Fn]+[F4]):
4. If you experience difficulty changing resolution s or your monitor freezes, restart all equipment 
including the projector.
Presentation is not displayed
The screen of the Notebook or PowerBook computer is not displaying your presentation.
Details
Some Notebook PCs may deactivate  their own screens when a second display device is in use. Each 
has a different method of reactivation. 
Resolution
Refer to your computer manual for information on changing the method of reactivation.
Notebook brandFunction keys
Acer [Fn]+[F5]
Asus [Fn]+[F8]
Dell [Fn]+[F8]
Gateway [Fn]+[F4]
IBM/Lenovo [Fn]+[F7]
HP/Compaq [Fn]+[F4]
NEC [Fn]+[F3]
To s h i b a [ F n ] + [ F 5 ]
Mac Apple System Preference > Display > Arrangement > Mirror display 
						

							   Troubleshooting
GS Series User Manual68
020-001044-02 Rev. 1 (07-2016)
Unstable or flickering images
The image is unstable or is flickering when projected.
Resolution
• To correct the pixels, use Pixel Track and Pixel Phase.
• Change the monitor color setting on your computer.
Vertical flickering bar
The image has a vertical, flickering bar when projected.
Resolution
• To make an adjustment, use  Auto Image.
• Check and reconfigure the display mode of your  graphic card to make it compatible with the 
projector.
Image is out of focus
The image is out of focus on the screen.
Resolution
• Make sure both lens caps (front and back) are removed.
• Adjust the lens focus to fit the screen.
• Make sure the projection screen is between the required distance.
Image is stretched
The image is stretched when displaying a 16:9 DVD title.
Details
When you play anamorphic DVD or 16:9 DVD, the  projector shows the best image if the projector 
display mode is set to 16:9 in the on-screen display. 
						

							   Troubleshooting
GS Series User Manual69
020-001044-02 Rev. 1 (07-2016)
Resolution
• If you play 4:3 format DVD titles, change the format to 4:3 in the projector on-screen display.
• If the image is still stretched, adjust the aspect  ratio by setting the display format as 16:9 
(wide) aspect ratio type on your DVD player. For more details, see  Size and Position menu on 
page 29.
Image is not the correct size
The image is too small or too large.
Resolution
• Adjust the lens zoom to fit.
• Verify you are using the correct lens.
• Change the position of the projector. 
						

							GS Series User Manual70
020-001044-02 Rev. 1 (07-2016)
Specifications
Learn about the product specifications. Due to continuing research, specifications are subject to 
change without notice.