Christie Projector DHD850-GS User Manual

   Operation
GS Series User Manual51
020-001044-02 Rev. 1 (07-2016)
Network
If you change a setting, the network subsystem  of the projector may restart, and you may be 
logged off.
PanelDescription
Restart 
Network Executes a network restart.
 This does not change any of the network settings. 

   Operation
GS Series User Manual52
020-001044-02 Rev. 1 (07-2016)
Network 
Factory Reset Executes a network factory reset. Network settings may be reset to the following default values.
Projector Name = Christie@ + Serial Number
Show Network Messages = ON
LAN settings:
• Manual
• IP Address = 192.168.0.100
• Subnet Mask = 255.255.255.0
• Default Gateway = 192.168.0.100
WLAN settings:
• Enable
• Start IP = 192.168.1.100
• End IP = 192.168.1.120
• Subnet Mask = 255.255.255.0
• Default Gateway =...

   Operation
GS Series User Manual53
020-001044-02 Rev. 1 (07-2016)
SNMP Panel Provides network administrators with a  common way to manage their network devices from a 
single remote location. Administrators can use  the Simple Network Management Protocol (SNMP) 
interface to query a number of devices to see thei r current status or configuration. Operators can 
change configuration values and configure trap noti fications to be sent when certain events occur 
(for example, loss of signal,  power state...

   Operation
GS Series User Manual54
020-001044-02 Rev. 1 (07-2016)
To o l s
Use the Tools pages to control size and position, image settings, configuration, light source, input 
switching, PIP, and test patterns.
Administrator Page
Add or delete a user or change password.
About Page
The About page provides version and  license information about GS Series.
TabDescription
Version Views the main firmware version, networ k firmware version, projector model name, and 
projector serial number.
License...

   Operation
GS Series User Manual55
020-001044-02 Rev. 1 (07-2016)
Christie Presenter
The Christie Presenter application allows a remote  desktop from a host PC to be displayed on the 
network display through Ethernet or wireless transports. It can adapt to different network settings 
(DHCP, fixed IP, and direct link by Ethernet cable).
Download Christie Presenter from the Christie  website or from the web page of the projector.
Connecting to the Projector
Before using Christie Presenter, you must...

   Operation
GS Series User Manual56
020-001044-02 Rev. 1 (07-2016)
d. Connect your PC device to the wireless SS ID for the selected projector, for example: 
Christie@0111000123.
Installing the Christie Presenter software
Install and configure the Christie Presenter software.
1. In a web browser, connect to the projectors network address.The default address is 192.168.1.100.
2. Download and install the Christie Presenter software. 

   Operation
GS Series User Manual57
020-001044-02 Rev. 1 (07-2016)
3. Configure the Christie Presenter software. 
The name entered identifies all computers connect ed to the projector by the Christie Presenter 
software—either wired or wireless connections. The  Network Display Management > Device 
Management  tab shows all current connections. 

   Operation
GS Series User Manual58
020-001044-02 Rev. 1 (07-2016)
Using the Christie Presenter
1. To pause or play the USB display, in the system tray, press  Autorun.
After starting the Christie Presenter  application, the main window appears.
IconDescription
Connects and searches the network display.
Stops or starts displaying desktop contents to the connected network display.
Selects a display region.
Configures Christie Presenter.
Manages all connecte d network displays.
Disconnects all connections. 

   Operation
GS Series User Manual59
020-001044-02 Rev. 1 (07-2016)
Connecting and searching the network display
1. To access the Connection menu section, click  .
2. If the IP address of the projector is  known, type the IP address and click Connect. 
3. If the IP address is not known: 
a. To search for the projector on the network, click  Search.
b. Select the projector to which you want to connect. 
c. To access the Login dialog, click  Connect directly.
4. In the Login dialog, select the  user type...

   Operation
GS Series User Manual60
020-001044-02 Rev. 1 (07-2016)
5. In the Select display port window, select the display port. 
Selecting the display region
When the connection is set up, you must select the display region.
1. To select the size of the projection region, click   and select an option: FullScreen, FixedSize, or Alterable.
TabDescription
FullScreen Turns the default capture mo de to full screen when the program is launched. If screen capture 
starts, the image of the enti re screen is...