Christie Projector DHD555-GS User Manual

Section 4: OPERATION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)4-37
Manage all connected network displaysClick the button   to control all the users and all the projectors 
connector to the same projector.
con
IconDescription
Administrator log in.
Normal user log in.
Device is connected.
Device is not connected.
The icon shows the current status and display 
position of the local screen on the network 
display. Click on the icon to change the display 
position. A dialog box will appear.
Click...

Section 4: OPERATION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)4-38
4.11 Card Reader Operation
There are four operation modes in the Card Reader application:
- USB Flash Devices Detection Screen
- Thumbnail Display Mode
- Images Display Mode
- Images Slide Show Mode
1. USB Flash Device  Detection Screen:
In this mode, the Card Reader application detects any USB flash devices 
hot-plug events and displays the flash dev ice icon. When the flash device is 
removed from USB, the icon disappears. It...

Section 4: OPERATION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)4-39
The user interface is designed to operate the card reader application with a 
few keys (Enter/Left/Right/Up/Down).
The following buttons are supported in the user interface:
•  Previous: Move the selected item left.  (Go to previous page when this is the 
leftmost item)
•  Next: Move the selected item right. (Go to next page when this is the  
rightmost item.)
•  Display: Display the selected image or display the selected...

Section 4: OPERATION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)4-40
The following operations are supported in the operation UI.
•  Display: Enter the Image Display Mode.
•  Thumbnail: Enter the Thumbnail Display Mode.
•  SlideShow: Enter the Slide Show Mode.
•  Actual Size: Display in actual size of the image.
•  Best Fit: Display the image in best fit to the screen.
•  EXIFDisp OFF/On: Enable/Disable EXIF information display.
•  +90deg: Rotate 90 degree.
•  -90deg: Rotate -90 degree.
4. Image...

Section 4: OPERATION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)4-41
When the image can NOT be displayed due to memory limitation or can 
NOT support image format, the specific image is displayed on the center of 
the screen. 

Section 4: OPERATION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)4-42 

Section 5: TROUBLESHOOTING
GS Series User Manual020-000724-01 Rev. 1 (05-2014)5-1
5. TROUBLESHOOTING
If you are unable to resolve an issue using the information provided in this 
section, contact your reseller or service center.
ProblemSolution
- No image appears on-screen- Make sure all the cables and power connections are correctly and securely connected See Installation.
- Check if the Light Status LED is in Green.
- Make sure you have removed the lens cap and the  projector is switched ON.
•...

Section 5: TROUBLESHOOTING
GS Series User Manual020-000724-01 Rev. 1 (05-2014)5-2
ProblemSolution
- Partial, scrolling or incorrectly 
displayed image- If you are using a Notebook:
1. Adjust resolution of the computer.
2. Press the keys listed below for your notebook manufacturer to send signal out from notebook to 
projector. Example: [Fn]+[F4]
- If you experience difficulty changing resolutions or your  monitor freezes, restart all equipment including the 
projector.
•  The screen of the  Notebook or...

Section 5: TROUBLESHOOTING
GS Series User Manual020-000724-01 Rev. 1 (05-2014)5-3
ProblemSolution
•  Image is out of focus- Make sure both lens caps (front and back) are removed.
- Adjust lens focus to fit.
- Make sure the projection screen is between the required 
distance.
•  The image is  
stretched when 
displaying 16:9 
DVD title - When you play anamorphic DVD or 16:9 DVD, the
 
projector will show the best  image when the projector 
display mode is set to 16:9 in the OSD.
- If you play 4:3 format...

Section 5: TROUBLESHOOTING
GS Series User Manual020-000724-01 Rev. 1 (05-2014)5-4