Christie Projector Boxer 2K20 User Manual

Lockingthelensmotor
Prev ents all lens motors from moving. It disables the zoom, focus, and offset settings, locking out any
changes and overriding all other lens features. This feature prevents accidental lens position changes
in multi-projector installations.
1. Select  MENU > Configuration >  Lens Settings > Lock all Lens Motors .
2. To enable locking of all lens motors, select  Enter.
Determiningwhatlenswarningsaredisplayed
Controls the level of lens warnings displayed. 1. Select  MENU >...

9. Select the appropriate color and select 
Enter.
10. To reset the primary colors to their defaults, select  Reset Color Primaries.
11. At the confirmation prompt, select  OK.
DMDcolorcorrection
Adjust the DMD color values as required.
Adjustingcolorbyprecisechromaticityvalues Change the values of the primary color components. 1. Select  MENU > Configuration > Color Correction by x,y .
2. Adjust the slider or enter the measured color values of the primary color component you selected.
3. To...

Adjustingcolorvaluesbasedongammafunction
The gamma function options adjust the color v alues of the inputted signal to give you a more detailed
picture.
1. Select  MENU > Image Settings > Color 	 Gamma  > Gamma Function.
2. Select the appropriate option:

3. Adjust the value and to confirm your selection, select 
Enter.
4. To set the achievable frame delay, select  Actual Delay.
5. Adjust the value and to confirm your selection, select  Enter.
Enablingfilmmodedetect
Enables or disables the detection of film motion. 1. Select  MENU > Image Settings  > Advanced Image Settings  > Film Mode Detect.
2. To enable the detection of film motion, select  Auto Detect.
3. To disable the detection of film motion, select  Disabled.
4. Select  Enter....

Blendingblacklevelsformultipleprojectors
Use black lev el blending to modify the brightness of non-blended regions to match the elevated
brightness levels of the blended regions.
You can adjust the black level intensity of multiple adjacent projected images to create one large
seamless display.
Enablingblacklevelblending Enable black level blending to eliminate the differences between black levels when edge blending
multiple projectors.
1. Select  MENU > Configuration >  Black Level Blending >...

Resettingblacklevelblending
R eset the black level blending to revert any black level blends.
Pressing Func+Help  on the IR remote keypad disables all geometry corrections (warping, keystone,
and black level blending) without changing the settings associated with them.
1. Select  MENU > Configuration >  Black Level Blending.
2. Select  Reset Black Level Blends.
3. At the confirmation prompt, select  Reset.
After the reset, the black level blend offsets are set to 0,  Use Edge Blend Width Values...

To disable keystone adjustments, select 
MENU > Configuration > Geometry Correction  >
Geometry Correction Mode  > Off.
Adjustingtheimagewith2Dkeystone 2D k
eystone distorts the projected image both vertically and horizontally simultaneously and
resembles a trapezoid.
Adjusting horizontal or vertical keystone correction after 2D keystone erases the 2D keystone settings;
however, performing 2D keystone after horizontal or vertical correction retains the previous keystone
setting. 1. Select 
MENU >...

1. Select 
MENU > Configuration >  Geometry Correction  > Geometry Correction Mode .
2. Select  Horizontal Keystone Correction .
3. From the correction dialog, adjust the horizontal keystone by using the arrow keys.
4. Select  Apply Changes .
Resettingkeystonecorrection Reset keystone to revert the distorted image shape back to default values.
Pressing  Func+Help  on the IR remote keypad disables all geometry corrections (warping, keystone,
and black level blending) without changing the settings...

Configuringsystem
settings
Learn how to configure the system settings.
Settingthedate
ontheprojector
Configure the date on Boxer 2K. 1. Select  Menu > System Settings  > Date 	 Time .
2. Select  Date.
3. Use the up and down keys to adjust the year (YYYY), month (MM), and day (DD).
Settingthetimeontheprojector Configure the time on Boxer 2K. 1. Select  Menu > System Settings > Date 	 Time .
2. Select  Time.
3. Use the up and down keys to adjust the hour (HH), minutes (MM), and seconds (SS)....

Changingthesplashscreen
Select the color displa yed on the screen.
1. Select  MENU > System Settings  > Splash Screen Settings  > Background Color .
2. Select a splash screen background color: