Christie Projector Boxer 2K User Manual

Enablingdirectpass-throughofHDMI,3G,and
DisplayPortinputsignals
Allow the signals from HDMI, 3G, and Displa
yPort inputs to pass through another projector.
1. Select  MENU > Configuration  > Input Settings > Enable Video Loop Out .
2. To enable passing HDMI, 3G, and DisplayPort input signals through to another projector, select Enter.
Adjustinglamppower Change the power of the lamp. 1. Select  MENU > Configuration >  Lamp > Lamp Power .
2. Press  Enter.
3. To adjust the lamp power, use the...

Configuring
communications
Defines and controls how single or multiple projectors are link
ed with each other and with a controlling
device.
Enablingprojectorcommunication
Enable the receivers and the wired keypad to communicate with the projector from the remote.
The front and rear IR sensors receive transmissions from the IR remote. Keep the transmission path to
these sensors unobstructed for uninterrupted communications with the projector .
Alternatively, you can connect a wired version of the...

Art-Netchannellisting
There are 512 channels per univ erse. Boxer 2K specifies 24 channels.Boxer 2K has multiple methods of being controlled in addition to Art-Net. If a setting is changed through
another interface, the DMX controller can re-

assert control by changing the value on the appropriate
DMX channel. Channel Name
DescriptionSuggested
starting
positionNotes
1 Slider Lock 0 to 171 = Locked
172 to 255 = Unlock

ed0

Channel Name
DescriptionSuggested
starting
positionNotes
10 

Input
index
Description
Input
indexDescription
11 One-Port [2-3@ 54One-Port, Dual-Input 3D L:[4-3@,R:[4-4@
12 One-Port [2-4@ 55One-Port, Dual-Input 3D L:[1-1@,R:[2-1@
13 One-Port [3-1@ 56One-Port, Dual-Input 3D L:[1-2@,R:[2-2@
14 One-Port [3-2@ 57One-Port, Dual-Input 3D L:[1-3@,R:[2-3@
15 One-Port [3-3@ 58One-Port, Dual-Input 3D L:[1-4@,R:[2-4@
16 One-Port [3-4@ 59One-Port, Dual-Input 3D L:[3-1@,R:[4-1@
17 One-Port [4-1@ 60Two-Port, Dual-Input 3D L:[0-1@[0-2@,R:[0-3@[0-4@
18 One-Port [4-2@ 61Two-Port,...

Input
index
Description
Input
indexDescription
41 Four-Port [1-1@[1-2@[2-1@[2-2@ 94 QSFP+ [1-2@
42 Four-Port [3-1@[3-2@[4-1@[4-2@ 95 QSFP+ [2-1@
43 Four-Port [1-1@[2-1@[3-1@[4-1@ 96 QSFP+ [2-2@Workingwithmacros
A utomate tasks in Boxer 2K with macros so the same tasks can be done on a regular basis. If the date and/or time is changed on the projector, a macro may be unexpectedly executed.
Addingamacro
Create a macro to automate a repetitiv
 e task.
Up to 10 macros can be created. This feature is only...

9. To test the functionality, click 
Test.
An  $ctLonsucceeded  
message is displayed upon a successful test.
10. To save the macro, click  Save.
Copyingamacro Duplicate a macro to create another macro of similar functionalit y.
Up to 10 macros can be created. This feature is only available on the web interface.
1. From the home page of the web interface, select  MENU > Macros and GPIO.
2.
 From the list of macros, click  Duplicate next to the macro you want to copy.If the limit of 10 macros is...

3. Click Delete.
4. At the confirmation prompt, click 
Delete.
ConfiguringtheGPIO
The Generic Purpose Input Output (GPIO) pro
vides a flexible method of interfacing with external
devices to the projector.
The GPIO is configured to automate real time events. Each of the seven pins is defined as either an
input or output depending on the required outcome. The remaining two pins are reserv ed for ground
and power.
Configure the pin as an input if you want the projector to respond to something the device...

D-SUB pin number
SignalNotes
Pin 2 GPIO 275mA max
(e)fused to prev
ent damage
Pin 3 GPIO 4
Pin 4 GPIO 6
Pin 5 Ground