Christie Ds+6k User Manual

							Users ManualUsersManual
020-100001-01 
						

							020-100001-01 Rev. 01 (04/07)     
China RoHS Compliance Information 
 
关于中国《电子信息产品污染控制管理办法》的说明 
 
 
• Environmentally Friendly Use Period 
环保使用期限 
 
 
The year number in the centre of the label indicates the Environmentally Friendly Use Period, which 
is required to mark on the electronic information product sold in China according to the China RoHS 
regulations. 
本标志中表示的年数是根据《电子信息产品污染控制管理办法》（2006年2月28日）以及《电
子信息产品污染控制标识要求》（2006年11月6日）制定的、适用于在中华人民共和国境内销
售的电子信息产品的环保使用期限。 
 
 
• Material Concentration Values Table 
 有毒有害物质含量表 
 
 
Material Concentration 
(有毒有害物质或元素) 
Part Name 部件名称 
铅 
（Pb） 
汞 
（Hg） 
镉 
（Cd） 
六价铬 
(Cr 6+） 
多溴联苯 
（PBB） 
多溴二联苯醚 
（PBDE） 
Low voltage 
power supply 
(LVPS) 低压电源 X O O  O  O  X 
AC relay 继电器 X O O  O  O  O 
Ballast 镇流器 X O O  O  O  X 
TIPM PCB TIPM电路板 X   O   O   O   O   O  
Built-in keypad 控制键盘 X O O  O  O  O 
Three-chip panel 
driver 三芯驱动板 X O O  O  O  O 
High Definition 
Panel Driver  高清晰度驱动板 X O O  O  O  O 
Dual slot 
backplane 
module  双槽底板模块 X O O  O  O  O 
Lamp Contact 
PCB 灯连接板 X O O  O  O  O 
Blower/Fan 吹风机/风扇 O O O  O  O  O 
Sensor 传感器 O O O  O  O  O 
Illumination optics 
system 照明光学系统 X O X  O  O  O 
Projection Lens 投影镜头 X O X  O  O  O 
Auxiliary optics 辅助光学器件 X O X  O  O  O 
Mechanical 
enclosure* 机械附件 X O O  O  O  O 
Software CD 软件光盘 O O O  O  O  O 
Lamp 灯泡 X O X  O  O  O 
Battery 电池 O O O  O  O  O 
Note: 
O : indicates that the concentration value of the particular hazardous substance contained in all the homogeneous materials for this part, 
according to EIP-A, EIP-B, EIP-C, is below the stipulated levels in China SJ/T11363-2006. 
     表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006规定的限量要求以下。 
X: indicates that the concentration value of the particular hazardous substance contained in all the homogeneous materials for this part, 
according to EIP-A, EIP-B, EIP-C, may be above the stipulated levels in China SJ/T11363-2006. 
     表示该有毒有害物质至少在该部件的某一均质材料中的含量可能超出SJ/T11363-2006规定的限量要求。 
* This part uses metallic alloys, which may contain Lead. 
    因该部件使用金属合金材料，故可能含有铅。  
						

							 
Table of Contents  
 
NOTE: Due to continuing research, all information in this manual is subject to change without notice. 
020-100001-01 Rev. 01 (04/07)    i 
1.1 Projector Overview ......................................................................................... 1-1 
1.2 Components..................................................................................................... 1-2 
1.3  Purchase Record and Servicing ....................................................................... 1-3 
 
2.1 Quick Setup ..................................................................................................... 2-1 
2.2 Installation Considerations .............................................................................. 2-3 
2.3 Connecting Sources....................................................................................... 2-12 
2.4 Connecting Communications ........................................................................ 2-15 
2.5  System Integration – GPIO Connector.......................................................... 2-19 
2.6 Power Connection ......................................................................................... 2-20 
 
3.1 About the Projector  .......................................................................................  3-1 
3.2 Using the Remote or Built-in Keypad ............................................................. 3-3 
3.3  Navigating the Menus ................................................................................... 3-10 
3.4  Using Inputs and Channels............................................................................ 3-14 
3.5  Adjusting the Image ...................................................................................... 3-19 
3.6  Adjusting System Parameters and Advanced Controls ................................. 3-36 
3.7   Working with PIP and Seamless Switching .................................................. 3-49 
3.8  Working with the Lamp  ............................................................................... 3-53 
3.9  Status Menu .................................................................................................  3-57 
3.10  Using Multiple Projectors ............................................................................. 3-57 
3.11  Remote Control of the Projector  .................................................................. 3-68 
3.12 Error Conditions ............................................................................................ 3-69 
 
4.1  Warnings and Safety Guidelines ..................................................................... 4-1 
4.2 Cleaning and Maintenance Guide ................................................................... 4-4 
4.3  Replacing Remote Batteries ............................................................................ 4-5 
4.4  Lamp and Filter Replacement ......................................................................... 4-5 
4.5  Replacing the Projection Lens....................................................................... 4-11 
 
5.1 Displays........................................................................................................... 5-1 
5.2 Lamp .............................................................................................................. 5-3 
5.3 Ethernet ........................................................................................................... 5-3 
 
6.1 Specifications .................................................................................................. 6-1  
Appendix A: Glossary ............................................................................................... A-1 
Appendix B: Keypad Reference .................................................................................B-1 
Appendix C: Serial Communications .........................................................................C-1 
Appendix D: Throw Distance .................................................................................... D-1 
Appendix E: System Integration ................................................................................ E-1 
Appendix F: Optional Input Modules ......................................................................... F-1 
Appendix G: Index .................................................................................................... G-1 
 
1 INTRODUCTION 
2 INSTALLATION & 
SETUP 
3 OPERATION 
4 MAINTENANCE 
5 TROUBLESHOOTING 
6 SPECIFICATIONS 
APPENDICES  
						

							Section 1 
Introduction  
 
020-100001-01 Rev. 01 (04/07)  1-1 
 
Christie DS+6K/5Kc/8K, HD6K/5Kc/8K/7Kc, 
Mirage S+3K/6K/8K, Mirage HD3/6/8, 
DW3K/3Kc/6K/6Kc, Matrix 
S+2K/5K/HD2/HD4/HD7, DLV1400-DX and 
DLV1920-DX are all professional 3-chip projectors 
based on next-generation Digital Light Processing™ 
(DLP™) technology by Texas Instruments™ to 
deliver high quality, crisp, clean images.  
Mirage S+3K/6K/8K and Mirage HD3/6/8 
projectors provide a powerful combination of SXGA+ resolution, high brightness and 
high contrast ratios to produce flawless, realistic three-dimensional graphic images for 
simulation, virtual reality and other stereographic related applications.  
The DW3K/3Kc and DW6K/6Kc provide exceptional image quality in a native 
widescreen format, HD2 resolution and superior color accuracy.  
Additional reliable and compact projectors are the Matrix S+2K/5K/HD2/HD4/HD7. 
With their purpose built simulation features such as RGB color matching, and gamma 
controls, it can be used to simulate any application. 
The DLV1400-DX and DLV1920-DX are designed for the demands of 24/7 control 
room applications and provide long-term reliability and performance. 
 
• Native SXGA+, HD or HD2 resolution (model dependant) with all others fully 
scaleable 
• Internal scaling of stereo signals (Mirage models) 
• 10-bit video processing 
• Built-in multi-standard video decoder 
• Display of NTSC, PAL and SECAM video input 
• User replaceable Cermax
® Xenon lamp 
• LiteLOC™ for constant brightness 
• Intelligent Lens System (ILS™) to save and restore lens settings 
• Motorized lens mount for all models 
• Auto-setup feature 
• Integrated ChristieNET™ 
• Networking ability through RS232 and RS422 connectors 
• Status LED display on built-in keypad for easy projector status monitoring 
• Control with IR, wired or built-in keypad 
• Two input slots for Optional Input Modules 
 
1.1   Projector 
Overview 
 Main Features f  
						

							Section 1: Introduction    
1-2 020-100001-01 Rev. 01 (04/07)   
Refer to Section 6 for a complete list of Specifications including Brightness and 
Contrast and Optional Input Modules 
The projector accepts data/graphics and video input signals for projection onto front 
or rear flat screens. High brightness light is generated by an internal Xenon lamp then 
modulated by three Digital Micro-mirror Device (DMD) panels that provide digitized 
red, green or blue color information. Light from the “on” pixels of each panel is 
reflected, converged and then projected to the screen through a single front lens, 
where all pixels are perfectly superimposed as a sharp full-color image (2D or 3D for 
Mirage models only). 
 
The following listed items are shipped with your projector. Ensure you have received 
all these items before using your projector. 
• User’s Manual  
• IR remote keypad (includes two, 1.5V AA batteries and a mini-stereo cable for 
conversion to wired) 
• Line cord  
• Stereo 3D Cable (Mirage only) 
• Warranty Card 
 
Lamp Type Model Name Resolution ChristieTWIST 3D Motorized Lens 
Mount 
DLV1400-DX SXGA+ Optional y 3 
DLV1920-DX HD Optional y 3 
Mirage S+3K  SXGA+ Optional 3 3 
Mirage HD3  HD Optional 3 3 
Matrix S+2K  SXGA+ 3 y 3 
500W Models 
Matrix HD2  HD 3 y 
3 
DW3K, DW3Kc  HD2 Optional y 3 
Christie DS+6K/5Kc  SXGA+ Optional y 3 
Christie HD6K/5Kc  HD Optional y 3 
Mirage S+6K  SXGA+ Optional 3 3 
Mirage HD6  HD Optional 3 3 
Matrix S+5K  SXGA+ 3 y 3 
1000W Models 
Matrix HD4  HD 3 
y 
3 
DW6K, DW6Kc  HD2 Optional y 3 
Christie DS+8K  SXGA+ Optional y 3 
Christie HD8K/7Kc  HD Optional y 3 
Mirage S+8K  SXGA+ Optional 3 3 
Mirage HD8  HD Optional 3 3 
1200W Models 
Matrix HD7  HD 3 y 3 
NOTE: Kc models include the same features, but are color corrected to film color standards. 
 How the projector works f 
1.2   Components  
						

							  Section 1: Introduction   
020-100001-01 Rev. 01 (04/07) 1-3. 
 
Whether the projector is under warranty or the warranty has expired, Christie’s highly 
trained and extensive factory and dealer service network is always available to quickly 
diagnose and correct projector malfunctions. Service manuals and updates are 
available to service technicians for all projectors. 
If you encounter any problems with the projector and require assistance, contact your 
dealer or Christie Digital Systems. Fill out the information in the table below and keep 
with your records for future reference.  
Purchase Record 
Dealer: 
Dealer Phone Number:
Projector Serial Number:
Purchase Date:
Installation Date, if applicable:
NOTE: The serial number can be found on the license label, which is located at the back of the projector. 
 
You can also register your product on-line by visiting www.christiedigital.com ⇒ 
Service and Support ⇒ Product Registration. This will keep you in touch with all 
the latest product information, such as updates, technical bulletins, downloads and 
Christie newsletters.  
For complete details on the warranty of your Christie product, please contact your 
Christie dealer.
1.3   Purchase 
Record and 
Warranty 
Registration 
   
						

							Section 2 
Installation & Setup  
 
013-100199-05 Rev. 01 (03/07)  2-1 
 
The instructions provided here are for those that are familiar with the projector and 
wish to quickly set it up and use it temporarily. Refer to the remaining subsections of 
this manual for a more complete setup. 
Install a Projection Lens  
The projection lens is shipped separately from the projector and must be installed 
prior to setting up the projector. Install the projection lens as described in 4.5 
Replacing the Projection Lens. 
 Remove the lens plug from the lens opening in the projector before installing 
the lens.  
 Remove the lens when shipping the projector and reuse the lens plug to 
prevent dust and debris from entering and settling on the projector’s optical 
components. 
Position the Projector 
Place the projector on a sturdy, level surface and position it so that it is perpendicular 
to the screen at a suitable distance. In general, the further back the projector is 
positioned from the screen, the larger the image will be.  
If required, you can level the projector by adjusting its three feet. With the projector 
positioned perpendicular to the screen the image will appear rectangular instead of 
keystoned.  
For more detailed instructions on positioning the projector refer to Projector Position 
and Mounting later in this section. 
Connect a Source 
Located at the back of the projector is the input panel where all source connections are 
made. Each input is clearly labeled for easy identification.  
Using the appropriate cable(s), connect your source. Connect RGB and YPbPr sources 
to 
INPUT 1 located in the upper right corner of the input panel. Use the DVI-I 
connector at 
INPUT 2 to connect analog or digital display signals. Connect composite 
video to 
INPUT 3 and S-video to INPUT 4.  
NOTE: One of the available optional input modules can be installed at 
INPUT 5 or 
INPUT 6
 for additional connections. 
Refer to 2.3 Connecting Sources for more details on connecting a specific source. 
2.1   Quick Setup 
 Step 1  f 
 Ste
p 2 f 
 Ste
p 3 f