Christie Digital Systems Matrix Hd7 Users Specifications

Matrix Series
Powerhouse Simulation Display Solutions 
Today’s simulation environments are more demanding than ever before.
With extreme specifications including high contrast and brightness and the
need to project onto a variety of screen shapes and sizes . . . each system is
unique. The Christie Matrix Series is purposebuilt to handle even the most
challenging of today’s simulation display requirements.
Offering the highest resolution and the highest contrast ratios, the Christie
Matrix Series is based...

Matrix Series
Display Technology
Featuring highquality DLP®technology and
true SXGA+(1400 x 1050) and full HD (1920 x
1080)  resolutions, the Christie Matrix Series is
highly reliable and will accept signals from
VGA to QXGA (2048 x 1536) 
resolution.DLP®
technologydelivers high brightness and
unsurpassedcolor,brightness uniformity and
control capabilities. As well, this proven digital
technology is low maintenance and completely
compatible with 4:3, 5:4 and 16:9 content. 
Image Quality
The Matrix S+5K...

Benefits
•Purposebuilt for simulation environments
•Optimized for complex arrays where color matching is very critical 
•Matrix S
+2K and Matrix S+5K can be used on motion platform simulation systems
• Small, compact designs
The Christie Matrix Series features userreplaceable
lamp modules with adjustable lamp power for
lower brightness. The stable color temperature 
over the course of the lamp life and the power
range provides the best lamp technology for color
matching across multiple screens.The...

Image Warping and Enhanced Edgeblending 
withChristieTWISTTM
Designed with enduser applications in mind, ChristieTWISTTMprovides fingertip control 
to expertly edgeblend multiple nonlinear images on all four sides seamlessly. Images can be 
warped to fit any dimension or shape. And the multiple blend and warp properties can be stored onthe projector – providing easy access and immediate recall of settings.
For highquality,largerthanlife displays, the Primary Color Adjust (PCA
TM) and input/output gamma...

Digital Color Management
(DCMTM)
Only Christie offers a specially designed 
optical system with a very tight ± 5nm tolerance
for primary colors, making multichannel
adjustments between multiple projectors an 
easy task to accomplish.
Color Temperature 
Control (CTCTM)
Provides the flexibility of color temperature
adjustment with a range from 3200K – 9300K.
Comprehensive Color
Adjustment (CCATM)
Individually adjust actual RGB channels for 
even color matching within individual projectors
for...

BRIGHTNESS•3000 (dual)/1500 (single) ANSI lumens (± 10%)•90% brightness uniformity (corrected)
CONTRAST•SuperCRTMcontrast – 15005000:1 full field•300:1 ANSI minimum
LAMP•Dual Osram PVIP®300 W•2000 hours (typical) lifetime•LiteLOCTM(Light Output Control)
POWER•100 – 240 VAC @ 50/60 Hz•Power consumption: 480 W (dual); 840W (single)•Thermal dissipation: 3210 BTU/hr•O
perating current: 8.4A @100V (dual); 3.4A @
2
00V (
dual); 4.8A @ 100V (single); 2A @ 200V
(
single)
DIMENSIONS (EXCLUDING LENS)•Weight: 36 lb...

 
English
 
 – 7
 
SAFETY INSTRUCTIONS
 
• If the muffler on your machine is fitted with a spark 
arrestor mesh then it should be cleaned regularly. A 
blocked mesh causes the engine to overheat, which can 
lead to serious damage. Never use a muffler with a 
defective spark arrestor mesh. 
 
Cutting equipment
 
This section describes how to choose and maintain your 
cutting equipment in order to:
• Obtain maximum cutting performance.
• Extend the life of cutting equipment.
 
General rules
 
1 Only use...

 
8 – 
 
English
 
SAFETY INSTRUCTIONS
 
General safety precautions
 
Starting
 
• The complete clutch cover and shaft must be fitted before 
the machine is started, otherwise the clutch can come 
loose and cause personal injury.
• Never start the machine indoors. Exhaust fumes can be 
dangerous if inhaled.
• Observe your surroundings and make sure that there is no 
risk of people or animals coming into contact with the 
cutting equipment.
• Place the machine on the ground, ensure the cutting 
attachment...

 
English
 
 – 9
 
SAFETY INSTRUCTIONS
 
• The transport guard must always be fitted to the cutting 
attachment when the machine is being transported or in 
storage.
 
General working instructions
 
Basic safety rules
 
1 Look around you:
• To ensure that people, animals or other things cannot 
affect your control of the machine.
• To ensure that people, animals, etc., do not come into 
contact with the cutting attachment or loose objects that 
are thrown out by the cutting attachment.
• CAUTION! Do not...

10 – English
SAFETY INSTRUCTIONS
Cutting
• The trimmer is ideal for cutting grass that is difficult to 
reach using a normal lawn mower. Keep the cord parallel 
to the ground when cutting. Avoid pressing the trimmer 
head against the ground as this can ruin the lawn and 
damage the tool.
• Do not allow the trimmer head to constantly come into 
contact with the ground during normal cutting. Constant 
contact of this type can cause damage and wear to the 
trimmer head.
Sweeping
• The fan effect of the...