Christie Digital Systems Matrix 1500 Specifications

							Christie’s Matrix Series – 
Synonymous with Simulation
Christie’s new Matrix Series simulation solutions are purpose-built
projectors designed to meet the specific requirements of the simulation
market. As technologies change and the demands of the simulation and
training markets increase, the need for lower cost simulation systems
with higher resolution and higher brightness is prevalent.
The Matrix 1500 is a purpose-built entry level single-chip DLP™ projector.
With a powerful 1500 ANSI lumens, the Matrix 1500 allows users to
work in daytime simulation environments, in full ambient light. Images
on-screen are depicted with the precise clarity of true SXGA resolution
(1280x1024) with Dark Metal DMD™ panels for a true digital end-to-end
solution. The SuperCR™ 1000:1 full field contrast ratio ensures the
accurate reproduction of night-mode scenery. The sealed optical engine
(SOE™) ensures dust-free operation. It is based on a double data rate
(DDR) interface between the controller and DMD, which reduces color
sequential artifacts, “spatial contouring” artifacts and dither noise in 
dark images.
Compatible with all most-used source resolutions, the Matrix 1500 can
connect to virtually every computer or video source. With Minimum
Processing Latency (MPL™), less than one frame delay enables extremely
fast simulator response time to user’s commands providing sharp, vibrant
images without loss of detail, flicker or motion artifacts.
The Matrix 1500 is quick to set up with an intuitive GUI and virtual plug
and play operation with a universal power supply that auto adjusts.
Christie’s Digital Color Management (DCM™) system offers a specially
designed color wheel with very tight +/- 5 nm tolerance for primary
colors and together with the Custom Gamma Adjustment (CGA™)
ensure the true color representation, color matching and uniformity
across multi-screen images in simulation applications.
Compact and quiet at only 28dB, the Matrix 1500 can work in any
simulation environment – and 2000 hours typical lamp life provides
reliability and a lower cost of operation. Ruggedized to withstand 3G
vibrations in all three axes, Christie’s Matrix 1500 is the reality for simulation.
APPLICATIONS
• 1500 ANSI lumens 
• SuperCR™ 1000:1 on/off contrast ratio
• True SXGA resolution (1280x1024) with dark metal DMD
• Digital Color Management (DCM™) for RGB color matching
across multiple screens
• Custom Gamma Adjustment (CGA™)
• Minimum Processing Latency (MPL™) of less than one frame
• Remote diagnostics and control via RS232 and optional
ChristieNET™ networking
• 250W UHP lamp with 2000 hrs of rated lamp life
• Sealed Optical Engine (SOE™) for dust-free operation
• Optional zoom lens and accessories
• Universal 90 to 260 V AC for world-wide operation
• Whisper-quiet 28dB operation
• 3G operating vibration specification in all three axes
• Compact 6.5 lbs (3 kg) lightweight design
•Aircraft, ship’s bridge and 
land vehicle simulators
•Driver training
•Air Traffic Control simulators
•Design simulators
•Architecture, engineering 
and construction
•Research and development
•Military training
•Entertainment
Matrix
1500 
						

							Brightness •1500 ANSI lumens 
Contrast Ratio  •Super CR™: 1000:1 Full Field 
Resolution •Single-chip DMD™ Optical System
featuring new Dark Metal (DM3)
DMD™ for improved black level and
contrast ratio
•True SXGA 1280 x 1024 chip resolution
without any convergence errors
•8-bit digital color processing•16.7 million displayable colors •13-bit user selectable gamma table 
Purpose-built Simulation Features•Digital Color Management (DCM™)
for RGB color matching across multiple
screens through individual RGB color
adjustments and special color wheel
with +/- 5 nm tight primary color
tolerance
•Custom Gamma Adjustment (CGA™)
features several gamma curves and
gray scale tracking control
•Minimum Processing Latency (MPL™)
of less than one frame
•Sealed Optical Engine (SOE™) for
dust-free operation
•3G operating vibration specification in
all three axes 
•Rigid cast magnesium (fully corrosion
resistant) cabinet for high durability 
•Color Temperature adjustment range
from 5000K to 9300K
Source Compatibility and Digital
Image Processing
•Compatibility with VGA, SVGA, XGA,
SXGA, SXGA+ and UXGA
•Resizing processing for computers and
workstations from VGA (640 x 480)
up to UXGA (1600 x 1200) resolution 
•Accepts composite video, S-video
(Y/C), component video (YUV) and
HDTV (YPbPr)
•Auto detects NTSC, NTSC 4.43, PAL,
PAL M, PAL N, SECAM
•Faroudja™ DCDi®‚ 10-bit motion
adaptive de-interlacing
•Automatic film detection mode with
3:2 and 2:2 pull down
•Separate, composite sync and sync-on-
green compatible
•HDTV Tri-level sync compatible for
various HDTV formats (1080i, 720p,
576i/p, 480i/p)
•User selectable aspect ratios 5:4, 16:9
and 4:3
•Digital horizontal and vertical keystone
Input Horizontal Frequency •15kHz to 120kHz 
Input Vertical Frequency •50 Hz to 110 Hz 
Dot Clock •205 MHz (Analog RGB)•165 MHz (Digital RGB: DVI-D)
Inputs •HD15 (x2)•DVI-D (x1)•S-video Y/C (4-pin mini-DIN)•Composite video (1 x RCA)•Component video (3 x RCA)•Audio (4 inputs for data and video
sources, 3.5mm stereo mini-jacks)
Outputs•Analog RGB HD15 (x1)•Audio out (3.5mm stereo mini-jack)
Standard Lens•Short throw fixed 1:1 lens (f/2.8,
f=17.9 mm)
•Manual focus •Rugged lens mount design
Optional Lens•Optional zoom Lens: 1.75-2.25:1
(f/2.8-3.0, f=31.1-39.2 mm)
•Zoom ratio: 1.3x•Projection distance: 5’-33’ (1.5m –10m)•Screen size 2.5’ to 18’ (0.7m – 5.5m) •Flexibility of installations at various
distances from the screen
•Fixed lens mount with manual focus
and zoom adjustment
Enhanced Feature Set •Front, rear and ceiling mount
installation options
•Intuitive on-screen display (OSD) menus•Service menu •Multiple language support •Auto set-up feature •Volume control and mute
Control/Networking •USB type B port for mouse and
firmware upgrades
•RS232 communication port via DB9
connector
•IR Remote multi-function keypad with
direct key controls, mouse and laser
pointer
•Front and rear IR receivers •Built-in keypad•Optional ChristieNET™ networking for
remote control, monitoring and
diagnostics 
Lamp Specification •250W UHP™ lamp from Philips•2000 hours of rated lamp life •User replaceable lamp•Pre-aligned lamp module 
Power Requirements •Universal voltage range (auto-
switching) 90-260V AC
•Line frequency: 50 - 60 Hz nominal •Power consumption: 350 W typical,
400W maximum  
•In-rush current rating: 50A maximum •Current rating: 4 A maximum at 
100-120 VAC, 2 A maximum at 
200-240 VAC
•Thermal dissipation: 1375 BTU/hr
maximum
Environmental •Operating Temperature: 0 - 35°C 
(32-95°F)
•Storage Temperature: -30 - 60°C 
(-22-140°F)
•Operating Humidity: 20 - 90% 
non-condensing 
•Storage Humidity: 0 - 90% 
non-condensing
•Acoustic noise level 28 dB achieved
with a proprietary air flow and fan
system 
Diagnostics•Built-in diagnostic LED•Lamp life warning indicator•Full remote diagnostics through RS232
9-pin D connector 
Size and Weight •Size: 9.6 L x 10.9 W x 3.5 H
(244mm L x 278mm W x 88mm H) 
•Weight: 6.5 lbs (3 kg)
Standard Accessories •IR Wireless Remote Keypad (with two
“AAA” type batteries included) 
•User Manual with Warranty
Registration Card 
•Computer HD15 RGB cable •DVI-D cable•Composite video cable•S-video cable•Audio cable•USB cable•Lens Cover•AC cord (US and European versions)•Soft-sided carrying case•Cable cover for ceiling mount
installations
Optional Accessories •Replacement lamp module •Service Manual •Transit case •Optional zoom lens 1.75-2.25:1•ChristieNET™ Networking
Regulatory Approvals •Safety: CSA C22.2 No. 950, UL 1950,
EN609050 European Norm “Safety of
Information Technology Equipment” 
•Complies with relevant worldwide
EMC and safety standards 
•The product complies with FCC class A
and EN55022 Class A requirements 
•This product conforms to all relevant
European directives, standards, safety,
health and environmental concerns
and bares the CE marking 
Warranty •Projector warranty: 15 months parts
and labor
•Lamp warranty: 120 days•Accessories: One year 
Matrix 1500•Specifications
Copyright 2003 Christie Digital Systems, Inc.. All rights reserved. All brand names and product names are trademarks,
registered trademarks or tradenames of their respective holders. Canadian manufacturing facility is ISO 9001 certified.Due to constant research, specifications are subject
to change without notice.
April 03-NA
WWW.CHRISTIEDIGITAL.COMCorporate Offices
USA
10550 Camden Drive
Cypress, CA  90630
PH: 714-236-8610
FX: 714-503-3385
Toll free: (800) 407-7727 (NA only)
[email protected] 
CANADA
809 Wellington Street North
Kitchener, Ontario  N2G 4Y7
PH: 519-744-8005
FX: 519-749-3136
Toll free: (800) 265-2171 (NA only)
[email protected] 
Branch Offices
UNITED KINGDOM
PH: +44 118 977 8000
FX: +44 118 977 8100
[email protected]
SINGAPORE
PH: +65 6877-8737
FX: +65 6877-8747
[email protected]
FRANCE
PH: +33 (0) 1 47 48 28 07
FX: +33 (0) 1 47 48 26 06
Mobile: +33 (0) 6 76 47 43 62
[email protected]
GERMANY
PH: +49 2161 664540
FX: +49 2161 664546
[email protected]
CHINA
PH: +86 21 6278 7708
FX: +86 21 6278 7707
[email protected]
MIL5651
Also in the Matrix Series
Matrix 2500
Matrix 3500