Christie Digital Systems Lx700 User Manual

51User's Manual
020-000119-01
Use the Point 	 buttons to adjust the gamma value to obtain a 
better balance of contrast (from 0 to 15).Gamma
Press the Point  button to decrease the sharpness of the image; 
press the Point 	 button to increase the sharpness of the image 
(from 0 to 31).Sharpness
An interlaced video signal can be displayed in progressive mode. 
Press the Point 	 buttons to change the progressive scan mode. 
  Off  . . . .  Progressive scan mode is “Off.”
  On  . . . .  Progressive...

52User's Manual
020-000119-01
Press the MENU button to display the On-Screen Menu. Use 
the Point 	 buttons to move the red frame pointer to the 
Setting Menu icon.1
2
Language
The language used in the On-Screen Menu is available in English, 
German, French, Italian, Spanish, Portuguese, Dutch, Swedish, 
Russian, Chinese, Korean, or Japanese.
Use the Point !  buttons to move the red frame pointer 
to the desired item and then press the 
SELECT button. The 
Setting dialog box appears.
Press the...

53User's Manual
020-000119-01
This function allows you to customize the screen logo with Logo 
select, Capture, and Logo PIN code lock functions.Logo
Note:
 s EFORECAPTURINGANIMAGESELECT“3TANDARD”INTHE)MAGE
3ELECT-ENUTOCAPTUREAPROPERIMAGEPP	
 s !SIGNALFROMACOMPUTERCANBECAPTUREDUPTO8!8
	
 s #ERTAINSIGNALSMAYNOTBECAPTUREDPROPERLY
 s 7HENCAPTURINGTHEIMAGETHATHASBEENADJUSTEDBYTHE
+EYSTONEFUNCTIONTHEADJUSTEDDATAISAUTOMATICALLYRESETAND...

54User's Manual
020-000119-01
Change the Logo PIN code lock setting
After a correct Logo PIN code is 
entered, the following dialog box 
appears.
Use the Point 	 buttons to switch On/Off,
This function prevents an unauthorized person from changing the 
screen logo.
  Off  . . . .  The screen logo can be changed freely from the Logo 
Menu.
  On  . . . .  The screen logo cannot be changed without a Logo 
PIN code.
If you want to change the Logo PIN code lock setting, press the 
SELECT button and the...

55User's Manual
020-000119-01
Setting
Lamp control
Filter control
Choose the running speed of cooling fans from the following 
options.
  Normal .......  Operate in this mode under normal conditions.
  Max ...........  Use this mode when you want to increase the 
cooling effect when operating the projector in high 
ambient temperature environment. Fan noise is 
louder than “Normal”.  Fan control This function allows you to change the brightness of the screen.
Auto  . . . . .   Brightness according to...

56User's Manual
020-000119-01
On start
When this function is set to “On,” the projector will be 
automatically turned on just by connecting the AC power cord to 
the wall outlet.
Note:
 s ESURETOTURNOFFTHEPROJECTORPROPERLYSEEh4URNING/FFTHE
0ROJECTORvONPAGE	)FTHEPROJECTORISTURNEDOFFINTHEINCORRECT
SEQUENCETHE/NSTARTFUNCTIONDOESNOTWORKPROPERLY
Power management
Time left before the lamp is off
Press the SELECT button at Power 
management and the dialog box 
appears.  Use the Point 	 
buttons to...

57User's Manual
020-000119-01
Security
Key lock
Key lock
Security
Select Key lock and 
this box appears. 
Choose one of the 
alternatives with the 
Point ! buttons 
and select [Yes] to 
activate it.
This function locks the side control and remote control buttons to 
prevent operation by unauthorized persons.
. . . . .   Unlocked.
. . . . .   Lock the side control buttons.
  To unlock, use the remote control.
. . . . .   Lock the remote control buttons.  
To unlock, use the side control.
If the side...

58User's Manual
020-000119-01
Change the PIN Code 
Change the PIN code
CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE, WRITE DOWN 
A NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO 
ON PAGE 83, AND KEEP IT SECURELY. IF YOU FORGET YOUR 
PIN CODE, THE PROJECTOR CAN NO LONGER BE STARTED.
The PIN code can be changed to your desired four-digit number. 
Press the Point   buttons to select “PIN code change” and press 
the SELECT button. The New PIN code input dialog box appears. 
Set a new PIN code.
Change the...

59User's Manual
020-000119-01
Lamp counter
This function is used to reset the lamp counter. 
When the lamp life reaches a recommended lamp replacement 
time, the time shown in the dialog box turns red and the Lamp 
replacement icon appears on the screen, indicating that the end of 
lamp life is approaching.
When replacing the projection lamp, reset the lamp counter. See 
“Resetting the Lamp Counter” on page 65.
This icon appears on the screen when the end of lamp life is 
approaching.
Note:
 
s...

60User's Manual
020-000119-01
Factory default
This function returns all setting values except for the user logo, PIN 
code lock, Logo PIN code lock, lamp counter, and filter counter to 
the factory default settings.Factory default
Quit
Exit the Setting Menu.
Select Factory default and this box 
appears. Select [Yes], and the next 
box appears. 
Test pattern
Various test pattern are available for use when setting up the 
projector.Filter counter
Filter counter
Filter replacement icon appears on the...