Christie Digital Systems Lx66a Users Manual

31
Basic Operation
Basic Operation
Press the FREEZE button on the remote control to freeze the
picture on screen. To cancel the Freeze function, press the
FREEZE button again or press any other button.
Press the P-TIMER button on the remote control. The timer
display “00 : 00” appears on the screen and the timer starts to
count time (00 : 00 ~ 59 : 59).  
To stop the counting, press the P-TIMER button. And then, press
the P-TIMER button again to cancel the  P-Timer function.
P-Timer Function
SCREEN...

32
Basic Operation
Press the D. ZOOM button on the remote control once and then
expand the image size with the SELECT button and pan the image
with the Point buttons (
e, d, 7, and 8) or the Control pad.
D. Zoom – D. Zoom +
Press the D. ZOOM button on the remote control twice and then
compress the image size with the SELECT button.
✔Note:
To exit the D. Zoom +/– mode, try the followings:
•To return to the normal screen, change Input, or change the screen size.
•To exit the panning mode, press any button...

33
Basic Operation
Basic Operation
LENS SHIFTMENU
CANCEL
SELECT ZOOM
FOCUS
How to Operate On-Screen Menu
The projector can be adjusted or set via the On-Screen Menu.
Refer to the following pages for respective adjustment and setting
procedure.
Gently tap on the Control pad on the remote control to spin
Menu icons. When the desired Menu icon comes right in
front, press the SELECT button to display the submenu.
Gently tap on or move your finger across the Control pad to
select an item to adjust. Press the...

34
Basic Operation
Menu icon
Pointer  
(Yellow frame)
Move the pointer with the Point buttons (eand d),
Control pad or mouse cursor to select an item and
press the SELECT button or click the mouse. The
selected item box will turns yellow.
Item
SELECT
button
Item data
Click edor move the bar to adjust
the value.
Control bar for Mouse Operation 
This bar appears when a USB mouse is connected to
the USB terminal of the projector.
Guide 
Currently selected menu.
On-Screen Menu
Mouse cursor
When clicking 77...

35
Basic Operation
Basic Operation
INPUT :selects input sources. Before selecting input sources with the top
control or the remote control, correct input source should be selected
through menu operation.
SYSTEM :selects system of the connected computer and video sources.  
IMAGE :selects image levels suitable for the connected image source and
allows you to select the image data stored in Image Adjust Menu.
IMAGE ADJ. :adjusts each picture component of the projected image in detail and
store the adjusted...

Input 
Press the MENU button to display the On-Screen Menu.
Spin Menu icons with the Point buttons (7and 8) or the
Control pad and press the SELECT button when the INPUT
icon comes right in front.1
Move the yellow frame pointer with the Point buttons (e
and d) or the Control pad to a input which you want to
select.2
Input 1
Move a pointer to Input 1 and press the SELECT button.
When the input source is analog coming from a
computer through the Input 1 (ANALOG IN)
terminal, select RGB (PC Analog). RGB (PC...

37
Input
Input
Y, Pb/Cb, Pr/CrWhen the input source is component
coming from video equipment connected to
the Input 3 (Y, Pb/Cb, Pr/Cr) terminal, select
Y, Pb/Cb, Pr/Cr.
Input 3
Move a pointer to Input 3 and press the SELECT button.
Input 4/Input 5
When video input signal is connected to the
Input 3 (VIDEO) terminal, select Video.Video
When video input signal is connected to the
Input 3 (S-VIDEO) terminal, select S-Video.S-Video
When the input source is analog coming
from a computer through the Input 2...

PC System Menu
1
2
Custom Mode
(1~50) set in the
PC Adjust Menu.
(p41, 42)
This projector automatically tunes to various types of computers
based on VGA, SVGA, XGA, SXGA, UXGA, or WXGA with its Multi-
scan system and Auto PC Adjustment. If Computer source is
selected in the Source Select Menu, this projector automatically
detects the signal format and tunes to project a proper image
without any additional setting. (Signal formats provided in this
projector is shown on pages 70~71 )
When the projector has...

39
System
System
AV System Menu (Video or S-Video)
AV System Menu (Component)
If the projector cannot reproduce proper video image, it is
necessary to select a specific broadcast signal format from among
PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.Move the yellow
frame pointer to a
system and press
the SELECT button
to activate it.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
The projector automatically detects incoming video signal, and
adjusts itself to optimize its performance.
If the projector...

40
Move the yellow
frame pointer to the
Auto PC adj.  and
press the SELECT
button.
PC Adjust Menu
PC ADJ. icon
To store adjustment parameters
Adjustment parameters from Auto PC Adjustment can be
memorized in this projector. Once parameters are memorized, the
setting can be done just by selecting Mode in the System menu
(p38). See Store on page 42.
✔Note:• Fine sync, Total dots and Picture Position of some computers can not be fully
adjusted with this Auto PC Adjustment function. When the image is not...