Christie Digital Systems Lx66, Ls+58 Users Manual

21
Installation
Terminals to connect AC power cord and other equipment are
located in the front part of the projector for easy setup.  The
terminal area is masked with the front cover to protect them from
dust and others, and hide messy cable connections.  

The projectors front terminal area has two replaceable Interface
board slots.  The projectors functions can be extended by
installing the optional interface boards into the terminal slots.  A
vacant slot (Input 5) is provided in your purchasing the...

22
Installation
Connecting to Computer (Digital and Analog RGB)

Cables used for connection
qVGA Cable (HDB 15 pin)  tAudio Cables (Mini Plug: stereo)✽
wDVI-D Cable  (✽= Not supplied with this projector.)
e BNC Cable 
✽
rSerial Cross Cable (RS-232C) ✽
q
t✽
Monitor Output
Audio Output
DIGITAL (DVI-D) AUDIO 2
(Stereo)
q
Monitor Input
SERIAL PORT IN
Note:
When connecting the cable, the power cords of both the projector and
the external equipment should be disconnected from AC outlet. 

w
Monitor Output...

23
Installation
Connecting to Digital PC/AV  Equipment (Warp & Blending)

Cables used for connection
qDVI-D Cable  
w Serial Cross Cables (RS-232C)
✽
(✽= Not supplied with this projector.)
Refer to the enclosed operation manual for details in operation of
the Warp & Blending feature.
PC Serial Port
Note:
When connecting the cable, the power cords of both the projector and
the external equipment should be disconnected from AC outlet. 

q
Digital Output
Other Projector
SERIAL PORT IN
SERIAL PORT INSERIAL...

24
Installation
Connecting to Video Equipment (Digital and Video)

INPUT 3
VIDEO/Y   Cb/Pb     Cr/PrS-VIDEO
R-AUDIO-L
(MONO)
Cables used for connection
q
Video Cable  ✽
w S-Video Cable  ✽
e DVI-D Cable
r Audio Cables (RCA x 2, Mini Plug: stereo)  ✽
( ✽ = Not supplied with this projector.)
Note:
When connecting the cable, the power cords of both the projector and
the external equipment should be disconnected from AC outlet.  r
✽
VIDEO
w✽
q ✽
S-Video Output
Audio Output
AUDIO
e
r ✽
DIGITAL (DVI-D)
Digital...

25
Installation
Connecting to Video Equipment (Component and RGB Scart)

INPUT 3
VIDEO/Y   Cb/Pb     Cr/Pr
R-AUDIO-L
(MONO)
Cables used for connection
qBNC Cable  ✽ 
w Scart-VGA Cable  ✽ 
e Component Cable  ✽  
r Audio Cables (Mini Plug (stereo) + RCA x 2, or RCA x 1)  ✽
(
✽= Not supplied with this projector.)
Note:
When connecting the cable, the power cords of both the projector and
the external equipment should be disconnected from AC outlet. 
r ✽
RGB Scart
21-pin Output Audio Output
w
✽r✽
r ✽ q✽...

26
Operating the Projector
You can operate the projector with the projectors top control, the remo\
te control or a USB mouse (not provided).  The
remote control is available as wireless and wired.
Operational range of the wireless remote control is within about 32.8 (\
10m) from the projector.  Operational range differs
depending on environments where the projector is used.  Any obstruction \
to air signal between the projector and the
remote control may prevent the remote control from working...

27
Basic Operation
Basic Operation and Reference Buttons
Operations & Buttons
Ref. Pages
On-Off28, 29
Lens Shift➔ ➔  30
Zoom➔ ( e
ed
d)   30
Focus ➔ ( e
ed
d)     30
Shutter 30, 55
Auto PC Adjust 31, 41
Input Selection (Input 1–5) 31, 37~38
Information 31, 61
Keystone – ➔ 32, 49
Screen Selection – 32, 48
Freeze – 32
P-Timer – 32
D.  Zoom – ➔ 33, 49
Remote CH and ID – 16, 17
Volume – ➔ 33
Mute – 33
Menu 34~36
Select
Cancel

Pad

Pad

Pad

Pad

Pad

Pad
Pad

For detail operations other than those on this...

28
Basic Operation
Turn on the MAIN On/Off switch of the projector.  The
LAMP indicator lights red, and the READY indicator lights
green.
Press the POWER ON-OFF button on the top control or the
remote control.  The LAMP indicator dims, and the cooling
fans start to operate.  The preparation display appears on the
screen and count-down starts.  The input and source
selected last appears after 20 seconds count-down.
2
3
1Complete peripheral connections (with Computer, VCR, etc.)
before turning on the...

29
Basic Operation
Press the POWER ON-OFF button on the top control or the
remote control, and a message Power off? appears on the
screen.  1
2
3
Press the POWER ON-OFF button again to turn off the
projector. The LAMP indicator brightly lights red and the
READY indicator goes out.  After approximate 90 seconds,
the READY indicator will light green again and then the
projector can be turned on by pressing the POWER ON-OFF
button.
The Cooling fans operate for approximate 2 minutes after the
projector is...

30
Basic Operation

Press the ZOOM/FOCUS button and adjust with the Control pad.
Press the LENS SHIFT button and adjust with the Control pad.

Shutter Function
Shutter function allows you to completely block out light to the
screen.  Press the SHUTTER button to release the shutter inside
the projector.  To open up the shutter, press the SHUTTER button
again.  Refer to p55~56 for detail of  setting for the Shutter
function. 
✔Note:• The SHUTTER buttons on the top control and the remote control can n\
ot...