Christie Digital Systems Lx55 Model 103-008100-01 Users Manual

✽ Projection lens is optional.
User’s Manual
103-008100-01MODEL 

2
CAUTION: T O  REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNER’S MANUAL WITH
THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
Before operating this projector, read this...

3
SAFETY INSTRUCTIONS
All the safety and operating instructions should be read before
the product is operated.
Read all of the instructions given here and retain them for later
use.  Unplug this projector from AC power supply before
cleaning.  Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm,
or when it is left unattended and unused for long periods of
time,...

4
COMPLIANCE
The AC Power Cord supplied with this projector meets the requirement for\
 use in the country you purchased it.  
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Unde\
rwriters
Laboratories (UL) and certified by the Canadian Standard Association (\
CSA).
AC Power Cord has a grounding-type AC line plug.  This is a safety featu\
re to be sure that the
plug will fit into the power outlet. Do not try to defeat this safety fe\...

5
TABLE OF CONTENTS
NAME OF EACH PART OF PROJECTOR 7
SETTING-UP PROJECTOR 8
CONNECTING AC POWER CORD 8
LENS INSTALLATION 9
ADJUSTABLE FEET 10
INSTALLING PROJECTOR IN PROPER POSITION 10
MOVING PROJECTOR 11
TERMINALS OF PROJECTOR 12
CONNECTING TO COMPUTERS 13
CONNECTING TO VIDEO EQUIPMENT 14
REMOTE CONTROL OPERATION 15
LASER POINTER FUNCTION 15
REMOTE CONTROL BATTERIES INSTALLATION 16
TOP CONTROLS AND INDICATORS 17
ON-SCREEN MENU 18
HOW TO OPERATE ON-SCREEN MENU 18
FLOW OF ON-SCREEN MENU OPERATION 18
MENU...

6
FEATURES AND DESIGN
This Multimedia Projector is designed with most advanced technology for \
portability, durability, and ease of use.
This projector utilizes built-in multimedia features, a palette of 1.07 \
billion colors, and matrix liquid crystal display
(LCD) technology.
◆Compatibility
This projector accepts various video and computer input
signals such as:●Computers 
IBM-compatible or Macintosh computer up to 1600
x 1200 resolution.
● 6 Color Systems
NTSC, PAL, SECAM, NTSC 4.43, PAL-M, or PAL-
N...

7
PREPARATION
NAME OF EACH PART OF PROJECTOR
BOTTOM OF CABINET
BACK OF CABINET
FRONT OF CABINET
LAMP COVER
ADJUSTABLE FEET
AND 
FEET LOCK LATCHES
This projector is equipped with cooling fans for protecting from
overheating. Pay attention to the following matters to ensure
proper ventilation and avoid a possible risk of fire and malfunction.
●
Do not cover the vent slots.
● Keep this side clear of any objects. Obstructions may block
cooling the air.
AIR INTAKE VENTS
PROJECTION LENS
SPEAKERS
INFRARED...

NOTE ON POWER CORD
AC power cord must meet the requirements of the country where you use th\
e projector.
Confirm the AC plug type with the chart below and a proper AC power cord\
 must be used.
If the supplied AC power cord does not match your AC outlet, contact you\
r sales dealer.
SETTING-UP PROJECTOR
8
PREPARATION
To POWER CORD
CONNECTOR on your
projector.
Projector sideAC Outlet side
Ground
To the AC Outlet.(120 V AC)
For Continental EuropeFor the U.S.A. and Canada
This projector uses nominal input...

9
PREPARATION
Before setting up the projector, install a projection lens on
the projector.
1. Before installation, check the area where the projector isused and prepare a suitable lens. For the specifications of
a projection lens, contact sales dealer where you
purchased the projector.
2. For installation, refer to the installation manual of the
optional lens.
LENS INSTALLATION
NOTE: 
•When installing the lens, remove the cover cap of the projector. COVER CAP 

10
PREPARATION
ADJUSTABLE FEET
INSTALLING PROJECTOR IN PROPER POSITION
Install the projector properly. Improper installation may reduce the lam\
p life and cause a fire hazard.
Do not tilt the projector more than 10 degrees from side to side.
Do not put the projector on either side to project an image.
NO SIDEWAYS
10˚10˚
ADJUSTABLE FEETFEET LOCK LATCHES
Projection angle can be adjusted up to 10.5 degrees with the
ADJUSTABLE FEET.
Lift the front of the projector and pull the FEET LOCK
LATCHES in each side...