Christie Digital Systems Lx450, Lx380 Users Manual
Have a look at the manual Christie Digital Systems Lx450, Lx380 Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 267 Christie Digital Systems manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 66
66
Maintenance and Filter Cleaning
Be sure to reset the Lamp counter after the lamp is replaced. When the L\
amp counter is reset, the LAMP
REPLACE indicator stops lighting and the Lamp replacement icon disappear\
s.
Press the MENU button to display the On-Screen
Menu. Use the Point
7 8buttons to move the red
frame pointer to the Setting Menu icon.
Use the Point edbuttons to move the red frame
pointer to Lamp counter and then press the SELECT
button. A dialog box appears showing the total
accumulated...](http://img.usermanuals.tech/thumb/1167/86740/w64_christie-lx380-manual_d-65.png "Page 66
66
Maintenance and Filter Cleaning
Be sure to reset the Lamp counter after the lamp is replaced. When the L\
amp counter is reset, the LAMP
REPLACE indicator stops lighting and the Lamp replacement icon disappear\
s.
Press the MENU button to display the On-Screen
Menu. Use the Point
7 8buttons to move the red
frame pointer to the Setting Menu icon.
Use the Point edbuttons to move the red frame
pointer to Lamp counter and then press the SELECT
button. A dialog box appears showing the total
accumulated...")
![Page 67
67
The WARNING indicators show the state of the function which protects the\
projector. Check the state of the
WARNING indicators and the POWER indicator to take proper maintenance.
Warning Indicators
The projector is shut down and the WARNING
TEMP. indicator is blinking red.
When the temperature inside the projector reaches a
certain level, the projector will be automatically shut down
to protect the inside of the projector. The POWER indicator
is blinking while the projector is being cooled down....](http://img.usermanuals.tech/thumb/1167/86740/w64_christie-lx380-manual_d-66.png "Page 67
67
The WARNING indicators show the state of the function which protects the\
projector. Check the state of the
WARNING indicators and the POWER indicator to take proper maintenance.
Warning Indicators
The projector is shut down and the WARNING
TEMP. indicator is blinking red.
When the temperature inside the projector reaches a
certain level, the projector will be automatically shut down
to protect the inside of the projector. The POWER indicator
is blinking while the projector is being cooled down....")
![Page 69
69
Troubleshooting
Before calling your dealer or service center for assistance, check the i\
tems below once again.
–Make sure you have properly connected the projector to peripheral equipm\
ent as described on pages 22–24.
– Make sure all equipment is connected to AC outlet and the power is turne\
d on.
– When the projector does not project an image from the connected computer\
, restart the computer.
Appendix
Problem: –Solutions
No power –Plug the power cord of the projector into the AC outlet.
–...](http://img.usermanuals.tech/thumb/1167/86740/w64_christie-lx380-manual_d-68.png "Page 69
69
Troubleshooting
Before calling your dealer or service center for assistance, check the i\
tems below once again.
–Make sure you have properly connected the projector to peripheral equipm\
ent as described on pages 22–24.
– Make sure all equipment is connected to AC outlet and the power is turne\
d on.
– When the projector does not project an image from the connected computer\
, restart the computer.
Appendix
Problem: –Solutions
No power –Plug the power cord of the projector into the AC outlet.
–...")
![Page 70
70
This symbol on the nameplate means the product
is Listed by Underwriters Laboratories Inc. It is
designed and manufactured to meet rigid U.L.
safety standards against risk of fire, casualty and
electrical hazards.
Appendix
The CE Mark is a Directive
conformity mark of the European
Community (EC).
Some displays are not seen–Check the Display function. See page 57.
during the operation.
PIN code dialog box appears –PIN code lock is being set. Input a PIN code (the “1234” or numbe\
rs
at start-up....](http://img.usermanuals.tech/thumb/1167/86740/w64_christie-lx380-manual_d-69.png "Page 70
70
This symbol on the nameplate means the product
is Listed by Underwriters Laboratories Inc. It is
designed and manufactured to meet rigid U.L.
safety standards against risk of fire, casualty and
electrical hazards.
Appendix
The CE Mark is a Directive
conformity mark of the European
Community (EC).
Some displays are not seen–Check the Display function. See page 57.
during the operation.
PIN code dialog box appears –PIN code lock is being set. Input a PIN code (the “1234” or numbe\
rs
at start-up....")
![Page 74
–
–
––
WARNINGFILTER
orange
LAMPred
74
Appendix
*When the projection lamp reaches its end of life, the LAMP REPLACE indic\
ator lights yellow. When this indicator lights
yellow, replace the projection lamp with a new one promptly. Reset the l\
amp counter after replacing the lamp. See pages
65–66.
The filter is clogged. Stop using the projector immediately and clean
or replace the filter (see below).
The Filter counter reached a set time. Clean or replace the filter as
soon as possible.
Projector...](http://img.usermanuals.tech/thumb/1167/86740/w64_christie-lx380-manual_d-73.png "Page 74
–
–
––
WARNINGFILTER
orange
LAMPred
74
Appendix
*When the projection lamp reaches its end of life, the LAMP REPLACE indic\
ator lights yellow. When this indicator lights
yellow, replace the projection lamp with a new one promptly. Reset the l\
amp counter after replacing the lamp. See pages
65–66.
The filter is clogged. Stop using the projector immediately and clean
or replace the filter (see below).
The Filter counter reached a set time. Clean or replace the filter as
soon as possible.
Projector...")
![Page 75
75
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with t\
he V- and H-Frequency mentioned
below and less than 140 MHz of Dot Clock. PC Adjustment is limited when selecting these modes.
ON-SCREEN
DISPLAYRESOLUTIONH-Freq.(kHz)V-Freq. (Hz)
VGA 1640 x 48031.4759.88
VGA 2720 x 40031.4770.09
VGA 3640 x 40031.4770.09
VGA 4640 x 48037.8674.38
VGA 5640 x 48037.8672.81
VGA 6640 x 48037.5075.00
MAC LC13640 x 48034.9766.60
MAC 13640 x 48035.0066.67
MAC...](http://img.usermanuals.tech/thumb/1167/86740/w64_christie-lx380-manual_d-74.png "Page 75
75
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with t\
he V- and H-Frequency mentioned
below and less than 140 MHz of Dot Clock. PC Adjustment is limited when selecting these modes.
ON-SCREEN
DISPLAYRESOLUTIONH-Freq.(kHz)V-Freq. (Hz)
VGA 1640 x 48031.4759.88
VGA 2720 x 40031.4770.09
VGA 3640 x 40031.4770.09
VGA 4640 x 48037.8674.38
VGA 5640 x 48037.8672.81
VGA 6640 x 48037.5075.00
MAC LC13640 x 48034.9766.60
MAC 13640 x 48035.0066.67
MAC...")
71 Appendix Menu Tree Dynamic RealCinema*Image 1Image 2Image 3 Image VolumeMuteQuitOn/OffSound0–63 Input Input 3Auto Go to System(3) Go to System(3) Video Go to System(1) S-video Standard Quit Input 1 Go to System(3)Video Go to System(1)Input 2 RGB Go to System(2)Component Image 4 RGB (PC Analog) RGB (PC Scart) RGB (PC Digital) RGB (AV HDCP) Quit Quit SYSTEM(3)SYSTEM(1) - - - - Mode 1 Mode 2 XGA 1SECAM NTSC Auto PAL PAL-M PAL-N NTSC4.43 SYSTEM(2) 1035i 720p Auto 1080i 480p 575i 575p 480i InputH-sync freq.V-sync freq. PIN code lock Information Key lock ScreenLanguageLamp statusPower managementSecurity Remote control code Quit 0–630–63 Off/L1/L2/Film Image AdjustContrastBrightnessColorTint RedGreenBlueSharpness ResetStore Gamma Progressive 0–630–630–630–15 0–15 Image 1Yes / No Quit Off/L1/L2Noise reduction 0–630–63 Image 2Image 3Image 4 Color temp.High/Mid/Low/XLow ✔Note: • The Menu display varies depending on the input signal.
72 Appendix LanguageSetting12 languages provided Blue/User/Black Off/Ready/Shutdown Auto 1/Auto 2/High/Normal/Eco Code 1–Code 8 Background Power management Lamp control Remote control Timer (1–30 Min)Quit Quit Capture Logo PIN code change Logo PIN code lock Quit Spotlight/PointerPointerQuit QuitAuto PC adj. Total dotsHorizontalVertical Display area HDisplay area VReset PC Adjust Yes/No Clamp Current mode Mode free/Store Quit Fine sync0–31 Mode 1 H-sync freq.V-sync freq.Quit NormalTrueWide Digital zoom – Full screen Screen Digital zoom + Rear Keystone CeilingResetStore On/OffOn/Off Logo selectLogoOff/Default/User Yes/No On/Off Both/Front/BackRC sensorOn/Countdown off/Off Display On/OffOn start Highland SlantFan controlOff/L1/L2 On/Off Projector (all) PIN code change PIN code lock Quit Key lockSecurityOff Projector (part) On/On 1/On 2 Remote control (all)Remote control (part) 8 test patterns providedTest patternQuitWarning logHour(s)Lamp counter QuitYes/No Hour(s)Filter counter QuitYes/NoOff/100H/200H/300H Reset Reset Yes/NoFactory defaultQuit ✔Note: • The Menu display varies depending on the input signal. Mode 3Mode 4Mode 5 Quit Mode 2 Mode 8Mode 9Mode 10 Mode 6Mode 7
73 Appendix Check the indicators for the projector condition. • • • lighting • • • off• • • blinking Indicators and Projector Condition The projector is off. (The AC power cord is unplugged.) The projector is in stand-by mode. Press the ON/STAND-BY button to turn on the projector. The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and the temperature returns to normal, the POWER indicator stops blinking and the projector can be turned on. (The WARNING TEMP. indicator keeps blinking.) Check and clean the filter. Projector Condition The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed and the POWER indicator stops blinking. POWERgreen Indicators WARNINGTEMP. red LAMPred The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center. Do not leave the projector on. It may cause an electric shock or a fire hazard. The projector is operating normally. The projector has been cooled down enough and the temperature returns to normal. When turning on the projector, the WARNING TEMP. indicator stops blinking. Check and clean the filter. W ARNING TEMP. indicator The projector is in the Power management mode. POWER, LAMP, WARNING TEMP., WARNING FILTER, and LAMP REPLACE indicators are blinking all together.
– – –– WARNINGFILTER orange LAMPred 74 Appendix *When the projection lamp reaches its end of life, the LAMP REPLACE indic\ ator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the l\ amp counter after replacing the lamp. See pages 65–66. The filter is clogged. Stop using the projector immediately and clean or replace the filter (see below). The Filter counter reached a set time. Clean or replace the filter as soon as possible. Projector ConditionPOWERgreen Indicators W ARNING FILTER indicator The lamp cannot light up. (The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed.) The lamp cannot light up. (The lamp has been cooled down enough and the projector is in stand-by mode and ready to be turned on with the ON/STAND-BY button.) Projector ConditionPOWERgreen Indicators LAMP REPLACE yellow LAMPred LAMP REPLACE indicator The lamp has been used overtime. Replace the lamp immediately and then reset the lamp counter. The indicator will be turned off after resetting the counter. If filter clogging is detected during operations, the Filter warning icon (red) appears on the screen and the WARNING FILTER indicator blinks orange, urging you to clean or replace the filter. Stop using the projector immediately and clean or replace the filter. The WARNING FILTER indicator and Filter warning icon will not be turned off until the filter is cleaned or replaced by a new one. Filter warning icon (red) appears on the screen when the projector detects filter clogging. ✔Note: •T he Filter warning icon (red) will not appear during “Freeze” (p.31), or “Now show” (p.32).
75 Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with t\ he V- and H-Frequency mentioned below and less than 140 MHz of Dot Clock. PC Adjustment is limited when selecting these modes. ON-SCREEN DISPLAYRESOLUTIONH-Freq.(kHz)V-Freq. (Hz) VGA 1640 x 48031.4759.88 VGA 2720 x 40031.4770.09 VGA 3640 x 40031.4770.09 VGA 4640 x 48037.8674.38 VGA 5640 x 48037.8672.81 VGA 6640 x 48037.5075.00 MAC LC13640 x 48034.9766.60 MAC 13640 x 48035.0066.67 MAC 16832 x 62449.7274.55 MAC 191024 x 76860.2475.08 SXGA 11152 x 86464.2070.40 SVGA 1800 x 60035.15656.25 SVGA 2800 x 60037.8860.32 SVGA 3800 x 60046.87575.00 SVGA 4800 x 60053.67485.06 SVGA 5800 x 60048.0872.19 SVGA 6800 x 60037.9061.03 SVGA 7800 x 60034.5055.38 SVGA 8800 x 60038.0060.51 SVGA 9800 x 60038.6060.31 SVGA 11800 x 60038.0060.51 ON-SCREEN DISPLAYRESOLUTIONH-Freq.(kHz)V-Freq. (Hz) XGA 101024 x 768 XGA 111024 x 768 XGA 121024 x 768 XGA 131024 x 768 62.0477.07 XGA 141024 x 768 61.0075.70 XGA 151024 x 768 35.52286.96 (Interlace) 46.9058.20 XGA 81024 x 768 47.0058.30 XGA 91024 x 768 58.0372.00 SXGA 41280 x 1024 63.4879.35 36.0087.17 (Interlace) 63.3459.98 SXGA 51280 x 1024 SXGA 61280 x 1024 SXGA 71280 x 1024 63.7460.01 71.6967.19 SXGA 101280 x 960 81.1376.107 60.0060.00 XGA 11024 x 768 XGA 41024 x 768 48.3660.00 XGA 61024 x 768 XGA 71024 x 768 56.47670.07 48.5060.02 44.0054.58 SXGA 81280 x 1024 SXGA 91280 x 1024 63.9860.02 79.97675.025 XGA 51024 x 76860.3174.92 VGA 7640 x 48043.26985.00 575p768 x 57531.2550.00 480p640 x 48031.4759.88 SXGA 121152 x 90071.4075.60 SXGA 111152 x 90061.2065.20 SVGA 10800 x 60032.7051.09 SXGA 131280 x 102450.0086.00 (Interlace) SXGA 21280 x 102462.5058.60 SXGA 31280 x 102463.9060.00 XGA 21024 x 76868.67784.997 XGA 31024 x 76860.02375.03 SXGA 181280 x 102446.4386.70 (Interlace) SXGA 191280 x 102463.7960.18 SXGA 141280 x 1024 SXGA 151280 x 1024 SXGA 161280 x 1024 SXGA 171152 x 900 50.0094.00 (Interlace) 63.3760.01 76.9772.00 61.8566.00 1080i1920 x 108033.7560.00 (Interlace) 720p1280 x 720 1035i1920 x 1035 45.0060.00 33.7560.00 (Interlace) 50.00 (Interlace) SXGA+ 11400 x 105063.9760.19 MAC211152 x 87068.6875.06 UXGA 41600 x 120093.7575.00 WXGA 21360 x 768 WXGA 31376 x 768 WXGA 41360 x 768 UXGA 11600 x 1200 47.7060.00 UXGA 21600 x 1200 48.3660.00 UXGA 31600 x 1200 56.1672.00 75.0060.00 81.2565.00 WXGA 11366 x 768 87.570.00 48.3660.00 SXGA+ 21400 x 105065.3560.12 SXGA+ 31400 x 105065.1259.90 SXGA 201280 x 102491.14685.024 575i––––––––15.73460.00 (Interlace)480i––––––––15.62550.00 (Interlace) WXGA 71280 x 768 WXGA 81280 x 768 60.28974.893 68.63384.837 WXGA 61280 x 76847.77659.87 UXGA 51600 x 1200106.2585.00 1080i1920 x 108028.125
76 Appendix ON-SCREENDISPLAYRESOLUTIONH-Freq.(KHz)V-Freq. (Hz) D-VGA640 x 48031.4759.94 D-480p640 x 48031.4759.88 D-575p768 x 57531.2550.00 D-SVGA800 x 60037.87960.32 D-SXGA 11280 x 102463.9860.02 ON-SCREEN DISPLAYRESOLUTIONH-Freq.(KHz)V-Freq. (Hz) D-720p1280 x 72045.0060.00 D-1035i1920 x 1035 D-1080i1920 x 1080 D-1080i1920 x 1080 33.7560.00 (Interlace) 33.7560.00 (Interlace) 28.12550.00 (Interlace) D-XGA1024 x 76843.36360.00 D-SXGA 21280 x 102460.27658.069 D-SXGA 31280 x 102431.6529.8 When an input signal is digital from the DVI terminal, refer to the char\ t below. PC Adjust Menu cannot be selected when Input 1 [RGB (PC digital)] is s\ elected in the Input Menu. ✔Notes: • When the input signal is D-SXGA 1, D-SXGA 2, and D-SXGA 3, images may no\ t be displayed properly depending on computers • Specifications are subject to change without notice.. D-WXGA 11366 x 76848.3660.00 D-WXGA 21360 x 76847.7060.00 D-WXGA 31376 x 76848.3660.00 D-WXGA 41360 x 76856.1672.00 D-WXGA 51368 x 76846.5050.00 D-WXGA 61280 x 76847.77659.87 D-WXGA 71280 x 76860.28974.893 D-WXGA 81280 x 76868.63384.837 D-SXGA+ 11400 x 105063.9760.19
77 Appendix Te chnical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 13.7” x 6.46” x.17.48” (348.1 mm x 164 mm x 444 mm) (Not inc\ luding adjustable feet) Net Weight 19.2 lbs (8.7kg) Feet Adjustment 0˚ to 5.0˚ Panel Resolution LCD Panel System 1.0” TFT Active Matrix type, 3 panels Panel Resolution 1,024 x 768 dots Number of Pixels 2,359,296 (1,024 x 768 x 3 panels) Signal Compatibility Color SystemPAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N High Definition TV Signal 480i, 480p, 575i, 575p, 720p, 1035i, and 1080i Scanning Frequency H-sync. 15 kHz–100 kHz, V-sync. 50 Hz–100 Hz Optical Information Projection Image Size (Diagonal) Adjustable from 30” to 300” Throw Distance 3.9’–32.8’ (1.2 m–10.0 m) Projection Lens F=1.7 to 2.1, f=33 to 43 mm with motor zoom and focus Projection Lamp 300 W Interface Input 1 Digital (DVI-D) x 1, Analog (Mini D-sub 15 pin) x 1 Input 2 BNC Type x 5 (G or Video/Y, B or Cb-Pb, R or Cr-Pr, HV and V) Input 3 RCA Type x 1, Mini DIN 4 pin x 1 AUDIO IN Audio 1 (Mini Type stereo), Audio 2 (Mini Type stereo), Audio 3 (RC\ A Type) x 2 Analog Out Mini D-sub 15 pin x 1 Audio OutAudio (Mini Type stereo) x 1 R/C Jack Mini Type (Wired Remote) x 1 Control Port Mini DIN 8 pin x 1 USB Connector USB Series B x 1 Audio Internal Audio Amp 1.0 W RMS Built-in Speaker 1 speaker, ø1.1” (28 mm) Power Voltage and Power Consumption AC 100–120 V (4.6A Max. Ampere), 50/60 Hz (The U.S.A and Canada) AC 200–240 V (2.3A Max. Ampere), 50/60 Hz (Continental Europe) Operating Environment Operating Temperature 41˚F–95˚F (5˚C–35˚C) Storage Temperature 14˚F–140˚F (-10˚C–60˚C) Remote Control Battery AAA or LR03 Type x 2 Operating Range 16.4’ (5 m/±30˚) Dimensions 1.8” (W) x 1.0” (H) x 5.7” (D) (45 mm x 25 mm x 145 mm)\ Net Weight 3.5 oz (99 g) (including batteries) Laser PointerClass II Laser (Max. Output: 1 m W/Wave length: 640–660 nm)
78 Appendix Model No. Long Zoom Lens : 38-809057-51 Short Zoom Lens : 38-809056-51 Control Cable : 103-107101-01 The parts listed below are optionally available. When ordering those par\ ts, specify the item name and Model No. to the sales dealer. Optional Parts Accessories Owner’s Manual (CD-ROM) Quick Reference Guide AC Power Cord Remote Control and Batteries VGA Cable USB Cable Lens Cap PIN Code Label ● The specifications are subject to change without notice. ● LCD panels are manufactured to the highest possible standards. Even thou\ gh 99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the chara\ cteristics of the LCD panels.
79 Appendix Terminal : Mini DIN 8-PIN CONTROL PORT CONNECTOR Vcc - Data + Data Ground 1 2 3 4 2 34 1 R X D ----- ----- GND RTS/CTS GND GND 1 2 3 4 5 6 7 8 INPUT 1/ANALOG OUT Te rminal: Analog RGB (Mini D-sub 15 pin) 512341096781514131112 Configurations of Terminals Red (R/Cr) Input/Output Ground (Horiz.sync.) Green (G/Y) Input/Output ----- Blue (B/Cb) Input/Output Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 ----- Horiz. sync. Input/Output (Composite H/V sync.) Ground (Vert.sync.) ----- Ground/ ----- Vert. sync. ----- 9 13 10 12 11 14 15 T X D USB CONNECTOR (Series B) D VI-D TERMINAL (DIGITAL) 1917 21018 31119 41220 51321 61422 71523 81624 T.M.D.S. Data2– No Connect T.M.D.S. Data2+ No Connect T.M.D.S. Data2 Shield DDC Clock DDC Data Analog Vert. sync 1 5 2 4 3 6 7 8 T.M.D.S. Data1– No Connect T.M.D.S. Data1+ No Connect T.M.D.S. Data1 Shield +5V Power Ground (for +5V) Hot Plug Detect 9 13 10 12 11 14 15 16 T.M.D.S. Data0– No Connect T.M.D.S. Data0+ No Connect T.M.D.S. Data0 Shield T.M.D.S. Clock Shield T.M.D.S. Clock+ T.M.D.S. Clock– 17 21 18 20 19 22 23 24 12345876
80 AppendixDimensions 13.7 (348.1) 1.65 (41.9) 5º MAX 7.87 (200) 6.46 (164) 21.09 (535.7) 17.48 (444) 10.85 (275.5) 3.40 (86.4) 11.10 (282) Screw Holes for Ceiling Mount Screw: M6 Depth: 0.393 (10.0) Unit: inch (mm)