Home
>
Christie Digital Systems
>
Projector
>
Christie Digital Systems Lx32 Model 38-viv207-01 Users Manual
Christie Digital Systems Lx32 Model 38-viv207-01 Users Manual
Here you can view all the pages of manual Christie Digital Systems Lx32 Model 38-viv207-01 Users Manual. The Christie Digital Systems manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
41 APPENDIX CLEANING PROJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch a surface. When the projector is not in use, replace Lens Cover. 1 3 Lightly wipe a cleaning cloth over Projection Lens.2 Follow these steps to clean Projection Lens: MAINTENANCE WARNING TEMP. INDICATOR WARNING TEMP. Indicator flashes red and projector is automatically turned off when an...
Page 42
42 APPENDIX TROUBLESHOOTING Before calling your dealer or service center for assistance, check the matters below once again. 1. Make sure you have connected a projector to your computer or video equipment as described in the section CONNECTING PROJECTOR on pages 11 ~ 13. 2. Check cable connection. Verify that all computer, video and power cord are properly connected. 3. Verify that all power is switched on. 4. If a projector still does not produce an image, re-start your computer. 5. If an image still...
Page 43
43 APPENDIX Remote Control Unit does not work.Check the batteries. Check ALL-OFF switch on Remote Control Unit is set to “ON.”. Make sure nothing is between Infrared Remote Receiver and Remote Control Unit. Make sure you are not too far from a projector when using Remote Control Unit. Maximum operating range is 16.4’ (5m). Make sure the code of Remote Control Unit is set to conform to projector. (See “SETTING” section on page 36, 37.) Problem:Try these Solutions Wireless Mouse function does not...
Page 44
44 APPENDIX TECHNICAL SPECIFICATIONS 0.99 TFT Active Matrix type, 3 panels Multi-media Projector 17.2 lbs (7.8 kg) 11.9 x 6.4 x 16.6 (302mm x 162mm x 422mm) 1024 x 768 dots 2,359,296 (1024 x 768 x 3 panels) PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N H-sync. 15 ~ 100 KHz, V-sync. 50 ~ 100 Hz Adjustable from 30” to 300” 800 TV lines INT. SP. Stereo (R and L), 2 watt RMS (T.H.D. 10%) 41 ˚F ~ 95 ˚F (5 ˚C ~ 35 ˚C) 14 ˚F ~ 140 ˚F (-10 ˚C ~ 60 ˚C) User’s Manual AC Power Cord Remote Control Unit and Batteries...
Page 45
45 CONFIGURATIONS OF TERMINALS COMPUTER INPUT-1 and MONITOR OUT TERMINALS (ANALOG) Terminal : HDB15-PIN 512341096781514131112 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V Power Horiz. sync. Ground (Vert.sync.) DDC Data Sense 0 Vert. sync. DDC Clock 9 13 10 12 11 14 15 Pin Configuration 1917 21018 31119 41220 51321 61422 71523 81624 C1 C2 C3 C5C4 Pin Configuration Analog Red Input Analog Ground (R/G/B) Analog Green Input...
Page 46
46 OPTIONAL PARTS The parts listed below are optionally supplied. When ordering those parts, give the name and Type No. to the sales dealer. Control Cable (PS2 Port) Type No. : POA-MCPS2 Control Cable (ADB Port) Type No. : POA-MCMAC MAC Adapter Type No. : POA-MACAP HDB 15 pin-SCART 21 pin Cable Type No. : POA-CA-SCART APPENDIX