Christie Digital Systems Lx1500 Users Manual

71

When an input signal is digital from the DVI terminal, refer to the chart below.
Appendix
✔Note:
	 •	Depending	on	the	condition	of	signals	and	the	type	and	length	of	cables,	these	signals	may	not	be	properly	
viewed.
	 •	Specifications	are	subject	to	change	without	notice.
ON-SCREEN DISPLA yRESOLUTION H-Freq .(kHz)V-Freq .(Hz)
D-VGA640x48031.470 59.940 
D-480p720x48031.470 59.880 
D-575p720x57531.250 50.000 
D-SVGA800x60037.879 60.320 
D-XGA1024x76843.363 60.000 
D-WXGA 11366x76848.360 60.000...

7

Technical Specifications
Mechanical Information 
 Projector Type  Multi-media Projector 
  Dimensions (W x H x D)  22.87” x 9.902” x 32.11” (581 mm x 251.5 mm x 815.5 mm) (Not including adjustable feet)
 
  Net Weight  80.3 lbs (36.5 kg)
 
  Feet Adjustment  0˚ to 5.7˚           
              
Panel Resolution 
 LCD Panel System  1.8” TFT Active Matrix type, 3 panels  
  Panel Resolution  1,024 x 768 dots
 
  Number of Pixels  2,359,296 (1,024 x 768 x 3 panels)           
            
Signal...

73

Optional Parts
     Model No.
Option Slot Board (DVI)    
: 103-104101-01
Option Slot Board (5-BNC)    
: 38-804716-04
Option Slot Board (D-sub 15)    
: 38-804718
Option Slot Board (Dual-SDI)    
: 38-804790-01
The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. 
to the sales dealer.
Appendix
●  The specifications are subject to change without notice.
●  LCD panels are manufactured to the highest possible standards. Even though 99.99% of...

74

Configurations of Terminals
ANALOG (Mini D-sub 15 pin)
512341096781514131112
Red Input
Ground (Horiz.sync.)
Green Input
Sense 2
Blue Input
Ground (Red)
Ground (Green)
Ground (Blue)
1
5

4
3
6
7

+5V Power
Horiz. sync.
Ground (Vert. sync.)
DDC Data
Sense 0
Vert. sync.
DDC Clock
9
13
10
1
11
14
15
CONTROL PORT CONNECTOR (D-sub 9 pin)
-----
R X D
T X D
-----
SG
-----
RTS
CTS
Serial
1

3
4
5
6
7

DIGITAL DVI-D (DVI 4 PIN)
1917
21018
31119
41220
51321
61422
71523
81624...

75

Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or 
lost the number and unable to operate the projector, contact the service station. 
Factory default set No:  1 2 3 4*
Factory default set No:  4 3 2 1*
*  S h o u l d   t h e   fo u r- d i g i t   n u m b e r   b e 
changed,  the  factory  set  number  will 
be invalid.
Put the label below (supplied) on in a prominent place of 
the projector’s body while it is locked with a PIN code.
While the...

76
Dimensions
Appendix
161°
14.74
 (374.5)
1.38
 (35)
10.61
 (269.5)
7.01 (178)7.01 (178)
8.27 (210)
1.57 (40)
8.27 (210)3.66 (93)
22.93 (582.5)
17.56 (446)
3.26
 (82.8)
9.72
 (247)
9.9 (251.5)2.36 (60)
5.7°
9.90 (251.5)
20.58 (522.7)
1.28 (32.5)
9.90 (251.5)
5.18 (131.5)
22.87 (581)
32.11 (815.5)
6.81 (173)
Unit : inch (mm) 

KE3K
CHRISTIE DIGITAL SYSTEMS, Inc.809 Wellington Street NorthKitchener, OntarioCanada N2G 4Y7Telephone (519) 744-8005North America call toll-free1-800-265-2171 (sales)Fax (519) 749-3136
CHRISTIE DIGITAL SYSTEMS, Inc.10550 Camden DriveCypress, CA 90630USATelephone (714) 236-8610Fax (714) 503-3385Toll Free 1-800-407-7727Toll Free 1-800-333-3816
CHRISTIE DIGITAL SYSTEMS, Inc.ViewPoint200 Ashville WayWokingham, Berkshire, U.K.RG41 2PLTelephone +44 118 977-8000Fax +44 118...