Christie Digital Systems Lwu420 Technical Guide
Here you can view all the pages of manual Christie Digital Systems Lwu420 Technical Guide. The Christie Digital Systems manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 11
![Page 11
9LWU420 User Manual-Technical Guide 020-000320-01 Rev. 1 (06-2010)
Command Control via the Network
Communication Port
The following two ports are assigned for the command control.
TCP #23
TCP #9715
Command Control Settings
Configure the following items form a web browser when command control is used.
When the authentication setting is enabled, the following settings are required.
Command Control via the Network
Port Settings
Network Control
Port1 (Port: 23)Port openClick the [Enable] check box to open...](http://img.usermanuals.tech/thumb/1167/86860/w300_christie-lwu420-technical_d-10.png "Page 11
9LWU420 User Manual-Technical Guide 020-000320-01 Rev. 1 (06-2010)
Command Control via the Network
Communication Port
The following two ports are assigned for the command control.
TCP #23
TCP #9715
Command Control Settings
Configure the following items form a web browser when command control is used.
When the authentication setting is enabled, the following settings are required.
Command Control via the Network
Port Settings
Network Control
Port1 (Port: 23)Port openClick the [Enable] check box to open...")
9LWU420 User Manual-Technical Guide 020-000320-01 Rev. 1 (06-2010) Command Control via the Network Communication Port The following two ports are assigned for the command control. TCP #23 TCP #9715 Command Control Settings Configure the following items form a web browser when command control is used. When the authentication setting is enabled, the following settings are required. Command Control via the Network Port Settings Network Control Port1 (Port: 23)Port openClick the [Enable] check box to open...
Page 12
![Page 12
10LWU420 User Manual-Technical Guide 020-000320-01 Rev. 1 (06-2010)
Command Control via the Network (continued)
Command Format
[TCP #23]
1. Protocol
Consist of header (7 bytes) + command data (6 bytes)
2. Header
BE + EF + 03 + 06 + 00 + CRC_low + CRC_high
CRC_low: Lower byte of CRC flag for command data
CRC_high: Upper byte of CRC flag for command data
3. Command data
Command data chart
byte_0 byte_1 byte_2 byte_3 byte_4 byte_5
Action Type Setting code
low high low high low high
Action (byte_0 - 1)
Action...](http://img.usermanuals.tech/thumb/1167/86860/w300_christie-lwu420-technical_d-11.png "Page 12
10LWU420 User Manual-Technical Guide 020-000320-01 Rev. 1 (06-2010)
Command Control via the Network (continued)
Command Format
[TCP #23]
1. Protocol
Consist of header (7 bytes) + command data (6 bytes)
2. Header
BE + EF + 03 + 06 + 00 + CRC_low + CRC_high
CRC_low: Lower byte of CRC flag for command data
CRC_high: Upper byte of CRC flag for command data
3. Command data
Command data chart
byte_0 byte_1 byte_2 byte_3 byte_4 byte_5
Action Type Setting code
low high low high low high
Action (byte_0 - 1)
Action...")
10LWU420 User Manual-Technical Guide 020-000320-01 Rev. 1 (06-2010) Command Control via the Network (continued) Command Format [TCP #23] 1. Protocol Consist of header (7 bytes) + command data (6 bytes) 2. Header BE + EF + 03 + 06 + 00 + CRC_low + CRC_high CRC_low: Lower byte of CRC flag for command data CRC_high: Upper byte of CRC flag for command data 3. Command data Command data chart byte_0 byte_1 byte_2 byte_3 byte_4 byte_5 Action Type Setting code low high low high low high Action (byte_0 - 1) Action...
Page 13
11LWU420 User Manual-Technical Guide 020-000320-01 Rev. 1 (06-2010) Command Control via the Network (continued) Decreasing the projector setting value (Decrement command) (1) The PC sends the following decrement code to the projector. Header + Command data (‘05H’ + ‘00H’ + type (2 bytes) + ‘00H’ + ‘00H’) (2) The projector decreases the setting value on the above setting code. (3) The projector returns the response code ‘06H’ to the PC. When the projector cannot understand the received command When the...
Page 14
12LWU420 User Manual-Technical Guide 020-000320-01 Rev. 1 (06-2010) 7. Reply Data The connection ID (the data is same as the connection ID data on the sending data format) is attached to the Network control commands reply data. ACK reply: ‘06H’ + ‘xxH’ NAK reply: ‘15H’ + ‘xxH’ Error reply: ‘1CH’ + ‘xxxxH’ + ‘xxH’ Data reply: ‘1DH’ + ‘xxxxH’ + ‘xxH’ Projector busy reply: ‘1FH’ + ‘xxxxH’ + ‘xxH’ Authentication error reply: ‘1FH’ + ‘0400H’ + ‘xxH’ (‘xxH’ : connection ID) Automatic Connection Break The TCP...
Page 15
13LWU420 User Manual-Technical Guide 020-000320-01 Rev. 1 (06-2010) RS-232C Communication / Network command table Names Operation Type HeaderCommand Data CRC Action Type Setting Code Power Set TURN OFF BE EF 03 06 00 2A D3 01 00 00 60 00 00 TURN ON BE EF 03 06 00 BA D2 01 00 00 60 01 00 Get BE EF 03 06 00 19 D3 02 00 00 60 00 00 (Example Return) 00 00 01 00 02 00 (Off) (On) (Cool Down) Input Source Set HDMI BE EF 03 06 00 0E D2 01 00 00 20 03 00 RGB1 BE EF 03 06 00 FE D2 01 00 00 20 00 00 RGB2 BE EF...
Page 16
14LWU420 User Manual-Technical Guide 020-000320-01 Rev. 1 (06-2010) Names Operation Type HeaderCommand Data CRC Action Type Setting Code RS-232C Communication / Network command table GAMMA Set #1 DEFAULT BE EF 03 06 00 07 E9 01 00 A1 30 20 00 #2 DEFAULT BE EF 03 06 00 97 E8 01 00 A1 30 21 00 #3 DEFAULT BE EF 03 06 00 67 E8 01 00 A1 30 22 00 #4 DEFAULT BE EF 03 06 00 F7 E9 01 00 A1 30 23 00 #5 DEFAULT BE EF 03 06 00 C7 EB 01 00 A1 30 24 00 #6 DEFAULT BE EF 03 06 00 57 EA 01 00 A1 30 25 00 #1 CUSTOM BE EF...
Page 17
15LWU420 User Manual-Technical Guide 020-000320-01 Rev. 1 (06-2010) RS-232C Communication / Network command table Names Operation Type HeaderCommand Data CRC Action Type Setting Code COLOR TEMP Set #1 HIGH BE EF 03 06 00 0B F5 01 00 B0 30 03 00 #2 MID BE EF 03 06 00 9B F4 01 00 B0 30 02 00 #3 LOW BE EF 03 06 00 6B F4 01 00 B0 30 01 00 #4 Hi-BRIGHT-1 BE EF 03 06 00 3B F2 01 00 B0 30 08 00 #5 Hi-BRIGHT-2 BE EF 03 06 00 AB F3 01 00 B0 30 09 00 #6 Hi-BRIGHT-3 BE EF 03 06 00 5B F3 01 00 B0 30 0A 00 #1 CUSTOM...
Page 18
16LWU420 User Manual-Technical Guide 020-000320-01 Rev. 1 (06-2010) Names Operation Type HeaderCommand Data CRC Action Type Setting Code RS-232C Communication / Network command table MY MEMORY Load Set 1 BE EF 03 06 00 0E D7 01 00 14 20 00 00 2 BE EF 03 06 00 9E D6 01 00 14 20 01 00 3 BE EF 03 06 00 6E D6 01 00 14 20 02 00 4 BE EF 03 06 00 FE D7 01 00 14 20 03 00 MY MEMORY Save Set 1 BE EF 03 06 00 F2 D6 01 00 15 20 00 00 2 BE EF 03 06 00 62 D7 01 00 15 20 01 00 3 BE EF 03 06 00 92 D7 01 00 15 20 02 00 4...
Page 19
17LWU420 User Manual-Technical Guide 020-000320-01 Rev. 1 (06-2010) RS-232C Communication / Network command table Names Operation Type HeaderCommand Data CRC Action Type Setting Code COLOR SPACE Set AUTO BE EF 03 06 00 0E 72 01 00 04 22 00 00 RGB BE EF 03 06 00 9E 73 01 00 04 22 01 00 SMPTE240 BE EF 03 06 00 6E 73 01 00 04 22 02 00 REC709 BE EF 03 06 00 FE 72 01 00 04 22 03 00 REC601 BE EF 03 06 00 CE 70 01 00 04 22 04 00 Get BE EF 03 06 00 3D 72 02 00 04 22 00 00 COMPONENT Set COMPONENT BE EF 03 06 00...
Page 20
18LWU420 User Manual-Technical Guide 020-000320-01 Rev. 1 (06-2010) Names Operation Type HeaderCommand Data CRC Action Type Setting Code RS-232C Communication / Network command table AUTO KEYSTONE V EXECUTEExecute BE EF 03 06 00 E5 D1 06 00 0D 20 00 00 AUTO KEYSTONE V Set TURN OFF BE EF 03 06 00 EA D1 01 00 0F 20 00 00 TURN ON BE EF 03 06 00 7A D0 01 00 0F 20 01 00 Get BE EF 03 06 00 D9 D1 02 00 0F 20 00 00 KEYSTONE H Get BE EF 03 06 00 E9 D0 02 00 0B 20 00 00 Increment BE EF 03 06 00 8F D0 04 00 0B 20...