Christie Digital Systems Lw25u Model 38-viv212-01 Users Manual

S–VIDEO
R–AUDIO–L VIDEO/Y Cb/Pb    Cr/PrVIDEO/Y Cb/Pb Cr/Pr
RESETCONTROL PORT AUDIO 1 AUDIO 2ANALOG DIGITAL(DVI-D)
INPUT 1
INPUT 2
INPUT 3
R/C JACK
G B R H/V V
(
MONO)
11
CONNECTING PROJECTOR
TERMINALS OF PROJECTOR
When controlling this projector
by computer, connect your
computer to this terminal.
(Refer to P12.)
Connect S-VIDEO
output from video
equipment to this
jack.  (Refer to P13.)  
Connect an audio output
(stereo) from computer to
these jacks.
(Refer to P12.)
Connect an audio output
from video...

12
CONNECTING PROJECTOR
S–VIDEO
R–AUDIO–L VIDEO/Y Cb/Pb    Cr/PrVIDEO/Y Cb/Pb Cr/Pr
RESETCONTROL PORT AUDIO 1 AUDIO 2ANALOG DIGITAL(DVI-D)
INPUT 1
INPUT 2
INPUT 3R/C JACK
G B R H/V V
(
MONO)
ON
1DIPON
OFF
23456
13 MODE (640 x 480)
16 MODE (832 x 624)
19 MODE (1024 x 768)OFF ON ON
ON ON
ON ONOFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF1234 56
OFF OFF ON ON ON ON 21 MODE (1152 x 870)
CONNECTING TO COMPUTER
IBM-compatible computer or Macintosh computer (VGA / SVGA / XGA / SXGA)
VGA Cable Monitor Output...

13
CONNECTING PROJECTOR
CONNECTING TO VIDEO EQUIPMENT
S–VIDEO
R–AUDIO–L VIDEO/Y Cb/Pb    Cr/PrVIDEO/Y Cb/Pb Cr/Pr
RESETCONTROL PORT AUDIO 1 AUDIO 2ANALOG DIGITAL(DVI-D)
INPUT 1
INPUT 2
INPUT 3R/C JACK
G B R H/V V
(
MONO)
Video Source (example)
Video Cassette Recorder Video Disc Player
S-VIDEO
Cable ✽
Terminals 
of a Projector
S-VIDEO Output
Cables used for connection(✽= Cable is not supplied with this projector.)
• Video Cable (RCA x 1) 
✽, or (RCA x 3) ✽
• BNC Cable ✽
• S-VIDEO Cable ✽
• Audio Cable...

14
TOP CONTROLS AND INDICATORS
Used to open or close
MENU operation. (P15,
16)
MENU BUTTON
IMAGE BUTTON
READY INDICATOR
SELECT BUTTON
POWER ON–OFF BUTTON
INPUT BUTTON
WARNING TEMP. INDICATORLAMP INDICATOR
POINT (VOLUME + / – ) BUTTONS 
LAMP REPLACE INDICATOR
Used to select image
level.  (P25, 31)
Lights  green when  a
projector is ready to be
turned on.  And it
flashes green in Power
Management mode.
(P35)Becomes dim when a
projector is turned on.
And bright when a
projector is in stand-by
mode.Turns to...

15
HOW TO OPERATE ON-SCREEN MENU
FLOW OF ON-SCREEN MENU OPERATION
Display ON-SCREEN MENU
Press MENU button to display ON-SCREEN MENU (MENU
BAR).  A red frame is POINTER.
Move POINTER (red frame) to MENU ICON that you want to
select by pressing POINT RIGHT / LEFT buttons.
Adjust ITEM DATA by pressing POINT RIGHT / LEFT
buttons.
Refer to following pages for details of respective
adjustments.
Press POINT DOWN button and move POINTER (red frame
or red arrow) to ITEM that you want to adjust, and then press...

16
BEFORE OPERATION
MENU BAR
PC SYSTEM MENU
Used to select
computer system.
(Refer to P20, 21)
IMAGE ADJUST MENU
Used to adjust computer
image. 
[Contrast / Brightness 
/ Color temp.
/ White Balance (R/G/B)
/ Color management 
/ Auto picture control
/ Gamma]
(Refer to P26-27)
SETTING MENU
Used to change
settings of projector
or reset Lamp
Replace Counter. 
(Refer to P35, 36)
SOUND MENU
Used to adjust
volume or mute
sound.
(Refer to P19)
IMAGE SELECT MENU
Used to select
image level among
Standard, Real...

17
BEFORE OPERATION
TURNING ON PROJECTOR
Connect a projectors AC Power Cord into an AC outlet.  LAMP
Indicator lights RED, and READY Indicator lights GREEN.
Press POWER ON-OFF button on Top Control to ON. LAMP
Indicator dims, and Cooling Fans start to operate. Preparation
Display appears on a screen and  count-down starts. Signal from
PC or Video source appears after 30 seconds.
Current Input position is also displayed on screen for 5 seconds. 
2
3
TURNING OFF PROJECTOR
Press POWER ON-OFF button on Top...

18
BASIC OPERATION
ADJUSTING SCREEN
Message disappears after 4 seconds.
Message disappears after 4 seconds.
Zoom
Focus
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
1Press ZOOM button on Top Control. Message “Zoom” is
displayed.
2Press POINT UP button to make image larger, and press
POINT DOWN button to make image smaller.
1Press FOCUS button on Top Control. Message “Focus” is
displayed.
2Adjust focus of image by pressing POINT UP/DOWN button(s) .

Lens shift

LENS SHIFT ADJUSTMENT
1Press LENS SHIFT button on Top...

19
BASIC OPERATION
1
2
Press MENU button and ON-SCREEN MENU will appear.  Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
SOUND Menu icon. 
Volume
Press VOLUME (+/–) button(s) on Top Control to adjust volume.
Volume dialog box appears on screen for a few seconds.
(+) button to increase volume, and (–) button for decreasing.
To increase volume, press POINT RIGHT button, and press POINT
LEFT button for decreasing. 
Press POINT LEFT/RIGHT button(s) to cut off sound.  Dialog box
display is...

20
COMPUTER INPUT
SELECTING INPUT SOURCE
DIRECT OPERATION
Choose Input by pressing INPUT button on Top Control.
If projector cannot reproduce proper image, select correct input source
through MENU OPERATION (see below).INPUT button
INPUT 1
INPUT 2
INPUT 3
Press MENU button and ON-SCREEN MENU will appear.  Press
POINT LEFT/RIGHT button to move a red frame pointer to
INPUT Menu icon.
Press POINT DOWN button and a red-arrow icon will appear.
Move arrow to RGB, and then press SELECT button.  
1
3
When...