Christie Digital Systems Ds60+, Dw30, Matrix 3000 Users Manual

Section 3: Operation 
 
Christie DS+60/DW30/Matrix 3000 User’s Manual     3-55  
 
Figure 3.26. Copy X/Y Values into All Projectors 
6.  In each projector, judge by eye and adjust x/y coordinates slightly in the following 
manner: 

Section 3: Operation 
3-56   Christie DS+60/DW30/Matrix 3000 User’s Manual  
Using the Color Saturation Menu for Color Matching 
You may prefer to use the 
Color Saturation menu to 
match colors across 
multiple screens. In the 
three Color Adjustment 
submenus (Red, Green, 
Blue—see right), set all 
main values to 100 and 
the secondary values to 0. 
Then judge by eye and 
adjust the slidebars as 
needed. Note that 
adjustments here define 
new x/y coordinates in the 
Color Adjustments by X,Y 
menu....

Section 3: Operation 
 
Christie DS+60/DW30/Matrix 3000 User’s Manual     3-57  

Section 3: Operation 
3-58   Christie DS+60/DW30/Matrix 3000 User’s Manual  
• If you have created a “User 1” color gamut (recommended) for a well-
matched wall, continue to Step 
1e. 
• If you prefer maximum brightness rather than a particular color 
temperature, select “Max Drives”. 
 IMPORTANT   
Do not change User 1 Color Adjustment 
in color-matched applications! 
1e) In the White Uniformity 
menu, set the “Overall” 
output level to 50.0 and all 
remaining slidebars to 0.0. 
This decreases the light...

Section 3: Operation 
 
Christie DS+60/DW30/Matrix 3000 User’s Manual     3-59  
 
Figure 3.28. Match Zones to Center Color Temperature 
Repeat the color adjustment of sides and corners for each edge of the screen that does 
not yet match the center (note that each corner is adjustable in either of its two 
adjacent “side” menus). When done, all areas of a given screen should match. Repeat 
Steps 
2a & 2b for all remaining screens. 
Step 3: Adjust Light Output in 8 Zones 
3a) For each screen, compare the...

Section 3: Operation 
3-60   Christie DS+60/DW30/Matrix 3000 User’s Manual  
Canceling Brightness Uniformity 
If you do not want to use or apply Brightness Uniformity settings, delete the 
checkmark from the “Uniformity Enable” checkbox at the top of the Brightness 
Uniformity menu. 
Christie Edge Blending is an innovative set of software functions that can quickly and 
easily blend the edges of multiple adjacent full screen images to create a single 
seamless larger image. 
What is a Blend? 
In simple...

Section 3: Operation 
 
Christie DS+60/DW30/Matrix 3000 User’s Manual     3-61  
Ranges: 0-80 horizontal, 0-60 vertical. 

Section 3: Operation 
3-62   Christie DS+60/DW30/Matrix 3000 User’s Manual  
Edge Blending Procedure 
BEFORE YOU BEGIN: Make sure your source 
hardware and/or software can supply a tiled image 
for the number of projector in use, and that the tiling 
includes overlapping data of approximately 12.5-
25% along shared edges (see Figure 3.34). Tiling 
not a projector feature. 
Physically align the projectors and images from 
your intended external source, then match colors 
and Brightness Uniformity....

Section 3: Operation 
 
Christie DS+60/DW30/Matrix 3000 User’s Manual     3-63  
6. CHECK BLEND: If the blended region appears too dark or light in relation to the rest 
of the image: 

Section 3: Operation 
3-64   Christie DS+60/DW30/Matrix 3000 User’s Manual  
Occasionally the projector will encounter an error condition that can interrupt normal 
operation. Such a condition can be caused by a simple invalid keypad entry, an input 
signal error (most common) or a system error. The manner in which users are to be 
notified of error conditions is set in the Menu Preferences menu: 
• To see error messages displayed on-screen, select the “
Screen” option 
• To be notified via a serial...