Christie Digital Systems Ds+60, Dw30, Matrix 3000 Users Manual

Section 3: Operation 
 
Christie DS+60/DW30/Matrix 3000 User’s Manual     3-15  
Shown at right is a sample channel list as would 
be available from
 
C han nel. This is typically called 
the channel list. 
NOTE: The 
C han nel key may display a channel list 
or not, depending on what you have defined for 
“Display Channel List” (see Menu Preferences 
later in this section). 
In order to access channels by using on the 
keypad, you must first create the channels. See 
below. 
To use a new source with the...

Section 3: Operation 
3-16   Christie DS+60/DW30/Matrix 3000 User’s Manual  
All available channels are listed in the Channel Setup menu, which describes how 
each channel can be accessed and which serves as the gateway for editing, copying 
and deleting channels. 
From the presentation 
level press 
Menu to display 
the Main menu. To 
display the Channel Setup 
menu, press
 
3, or 
move the highlight to the 
Channel Setup option and 
press
 
. The Channel 
Setup menu will appear 
(see sample at right),...

Section 3: Operation 
 
Christie DS+60/DW30/Matrix 3000 User’s Manual     3-17  
FUNCTIONS WITHIN THE CHANNEL SETUP MENU —To copy, delete or edit a channel, 
highlight the desired channel in the Channel Setup menu and do one of two things: 
• Press 
Func if you want to copy the selected channel or delete this or 
other channels. See Copying or Deleting a Channel below. 
• Press 
 if you want to edit channel setups (i.e., non-image related 
parameters) for the selected channel. See Editing a Channel...

Section 3: Operation 
3-18   Christie DS+60/DW30/Matrix 3000 User’s Manual  
TO DELETE MULTIPLE CHANNELS, highlight any channel in the Channel Setup menu 
and press 
Func to go to the Channel Copy/Delete submenu. Select “Delete Unlocked 
Only” and press 
 to delete all unlocked channels. Or select “Delete All Channels” 
to delete all channels, even those that are locked. In either case, the current channel 
will remain but will be redefined from projector defaults. 
NOTE: For any deletion, a confirmation...

Section 3: Operation 
 
Christie DS+60/DW30/Matrix 3000 User’s Manual     3-19  
• AUTO SOURCE: If checked, (default), the projector can automatically locate 
this channel when an incoming input signal matches. If not checked, the 
projector can locate the selected channel only when it is directly selected via 
Channe l on the keypad—and a change in input signal will not result in a channel 
change. 
• 
LOCKED: If checked, all of the image settings for this channel are disabled. If 
unchecked (default),...

Section 3: Operation 
3-20   Christie DS+60/DW30/Matrix 3000 User’s Manual  
In the Size and Position menu, you 
can increase or decrease the size of 
your image, change its proportion 
(aspect ratio), move the image to a 
specific area of the screen, and 
refine other related parameters. Use 
Size and Position controls to match 
the image precisely to the screen 
used at the site. 
Refer to Using Slidebars and 
Other Controls (earlier in this 
section) if you need help using any 
of the options and...

Section 3: Operation 
 
Christie DS+60/DW30/Matrix 3000 User’s Manual     3-21  
 
• Select
 “NO RESIZING” to display the image in its native resolution, which may or 
may not match the projector’s resolution. For example, for a source with a native 
resolution of 800 x 600, “No Resizing” in an SXGA+ projector will use the central 
800 x 600 pixels and have a black border—the black border areas are unused areas. 
See below. 
 
• Select “FULL SIZE” to use all 
pixels for displaying the image, 
regardless...

Section 3: Operation 
3-22   Christie DS+60/DW30/Matrix 3000 User’s Manual  
 
• Select “ANAMORPHIC” to display an anamorphic image 
in its native 16:9 aspect ratio. The image will fill the 
screen from side-to-side and be centered between black 
bars at top and bottom.  
 
Size 
“Size” controls both the image width and height in tandem, maintaining the current 
aspect ratio (proportion) of the displayed signal data.  
Vertical Stretch 
“Vertical Stretch” adjusts the height of the image while keeping the...

Section 3: Operation 
 
Christie DS+60/DW30/Matrix 3000 User’s Manual     3-23  
H-Position 
This option moves the image right or left within the area of available pixels. 
NOTE: The value shown represents where the approximate center of the image lies in 
relation to the total number of pixels available horizontally. This varies widely 
according to the signal—watch the image while adjusting. 
V-Position 
This option moves the image up or down within the area of available pixels. 
NOTE: The value shown...

Section 3: Operation 
3-24   Christie DS+60/DW30/Matrix 3000 User’s Manual  
PLUG & DISPLAY (EDID): By default, a Plug & Play 
(EDID) source outputs a signal according to the EDID 
information provided by the projector. To override this 
information and display in a different format (for example, 
if your Plug & Play [EDID] device does not support the 
projector’s resolution and/or frequency), select the desired 
Plug & Play (EDID) resolution from the list. 
Any daisy-chained projectors will also display...