Christie Digital Systems Ds+5k, Kc-8k, Dw3k-6k, Kc, Hd5k, Kc-8k, Kc, Mirage S+2-4-8k, Dlv1400-dx, 1920-dx, Matrix S+2k, 4000, Hd4k Users Manual

Users ManualUsersManual
013-100199-04 

 
Table of Contents  
 
NOTE: Due to continuing research, all information in this manual is subject to change without notice. 
013-100199-04 Rev. 01 (11/06)    i 
1.1 Projector Overview ......................................................................................... 1-1 
1.2 Components..................................................................................................... 1-2 
1.3  Purchase Record and Servicing ..........................................................................

Section 1 
Introduction  
 
013-100199-04  1-1 
 
Christie DS+5K/5Kc/8K, HD5K/5Kc/8K/8Kc, 
Mirage S+2K/4K/8K, DW3K/3Kc/6K/6Kc, Matrix 
S+2K/4000/HD4K, DLV1400-DX and DLV1920-
DX are all professional 3-chip projectors based on 
next-generation Digital Light Processing™ 
(DLP™) technology by Texas Instruments™ to 
deliver high quality, crisp, clean images.  
Mirage S+2K/4K/8K projectors provide a powerful 
combination of SXGA+ or HD resolution (model 
dependant), high brightness and high contrast ratios...

Section 1: Introduction    
1-2 013-100199-04   
Refer to Section 6 for a complete list of Specifications including Brightness and 
Contrast and Optional Input Modules 
The projector accepts data/graphics and video input signals for projection onto front 
or rear flat screens. High brightness light is generated by an internal Xenon lamp then 
modulated by three Digital Micro-mirror Device (DMD) panels that provide digitized 
red, green or blue color information. Light from the “on” pixels of each panel...

  Section 1: Introduction   
 013-100199-04 1-3. 
 
Whether the projector is under warranty or the warranty has expired, Christie’s highly 
trained and extensive factory and dealer service network is always available to quickly 
diagnose and correct projector malfunctions. Service manuals and updates are 
available to service technicians for all projectors. 
If you encounter any problems with the projector and require assistance, contact your 
dealer or Christie Digital Systems. Fill out the information...

Section 2 
Installation & Setup  
 
013-100199-04  2-1 
 
The instructions provided here are for those that are familiar with the projector and 
wish to quickly set it up and use it temporarily. Refer to the remaining subsections of 
this manual for a more complete setup. 
Install a Projection Lens  
The projection lens is shipped separately from the projector and must be installed 
prior to setting up the projector. Install the projection lens as described in 4.5 
Replacing the Projection Lens. 
 Remove...

Section 2: Installation and Setup  
2-2      013-100199-04   
 
Connect the Line Cord 
 The North American-rated line cord is provided with each projector. Ensure 
that you are using a line cord, socket and power plug that meets the 
appropriate local rating standards.
 
Plug the line cord to the AC receptacle located on the right hand side of the projector 
and the three-pronged end into a grounded AC outlet. Ensure the socket outlet is 
installed near the equipment and is easily accessible. The input...