Česká Zbrojovka Cz 100 Instruction Manual

INSTRUCTION MANUAL 
CZ 100 
 
 
 
 
 
 
 
 
 
  

CZ 100  -  INSTRUCTION MANUAL 13 Before handling the pistol read this manual carefully and observe the following safety instructions. Improper and careless handling of the pistol could result in unintentional discharge and could cause injury, death or damage to property. The same consequences can be caused by unauthorized modifications or adjustments, corrosion, or use of non-standard or damaged ammunition. In these cases the manufacturer shall not be responsible in any manner whatsoever for the...

CZ 100  -  INSTRUCTION MANUAL 14 SAFETY INSTRUCTIONS 
 
Always follow the safety instructions for your safety and the safety of others. 
1. Always handle your pistol as if it were loaded. 
2. Never point your pistol at anything you do not intend to shoot. 
3. Never take anyones word that a gun is unloaded. 
4. Always make sure that your pistol is not loaded before laying it down, or 
handing it to another person. 
5. Always keep and carry your pistol empty, except when you intend to shoot. 
6. Never...

CZ 100  -  INSTRUCTION MANUAL 15 PISTOL DESCRIPTION AND TERMINOLOGY 
 
The names of basic pistol parts used in this Instruction Manual are presented 
in Fig. 1. Nomenclatures of all CZ 100 parts are presented in the section 
Illustration and List of Parts. 
 
The CZ 100 pistol is a semi-automatic handgun with locked breech. It is 
produced in several versions. Characteristic features of all versions are: 
 
- ergonomical shape allowing shooting to be carried out by left or right hand 
- comfortable grip...

CZ 100  -  INSTRUCTION MANUAL 16 OPERATING INSTRUCTIONS 
 
WARNING: 
Before shooting always wipe the barrel bore dry, and lubricate the slide guiding 
rails with a suitable lubricating agent. 
 
Ammunition 
Use only factory-manufactured standard ammunition of appropriate caliber, 
which are in compliance with CIP regulations (International Proof Commission for 
Firearms) or SAAMI (Sporting Arms and Ammunition Manufacturers Institute Inc. 
of the United States). The use of other cartridges could damage...

CZ 100  -  INSTRUCTION MANUAL 17 Reloading During Shooting 
When the last cartridge has been fired the slide will stay to the rear. Remove 
the emptied magazine and replace it with a loaded one. Thumb down the slide 
stop with the shooting hand (Fig. 4), or with the other hand draw back the slide 
and allow it to snap forward (Fig. 3). The pistol is again loaded and ready to fire. 
 
Unloading the Pistol 
ALWAYS MAKE SURE THE PISTOL IS POINTED IN A SAFE DIRECTION! 
- remove the magazine 
- draw back the...

CZ 100  -  INSTRUCTION MANUAL 18 MAINTENANCE INSTRUCTIONS 
Stripping for Cleaning - Disassembly 
ALWAYS MAKE SURE THE PISTOL IS POINTED IN A SAFE DIRECTION! 
1. For the safety reasons remove the magazine first. 
2. MAKE SURE THAT THERE IS NO CARTRIDGE IN THE CHAMBER! 
3. Put your left thumb through the trigger guard and with the other fingers grasp 
the top of the front part of the slide firmly (Fig. 5). Push the slide slightly back 
until the position of the recess in the slide enables the removal of...

CZ 100  -  INSTRUCTION MANUAL 19 Cleaning the Pistol 
Clean the pistol 
- each time you use it 
- if you get your pistol wet 
- as soon as possible after shooting 
- at least once a year in a temperate climate 
- as often as once a month in a tropical climate, or other demanding 
environment 
 
Cleaning the Barrel Bore and the Cartridge Chamber 
If the pistol has not been fired or if only a few cartridges have been fired, clean the 
barrel bore and cartridge chamber by the clean patch attached to the...

CZ 100  -  INSTRUCTION MANUAL 20 ILLUSTRATION AND LIST OF PARTS   

CZ 100  -  INSTRUCTION MANUAL 21 1 Slide 
2 Barrel Stop 
3 Firing Pin Stop 
4 Detent Spring 
5 Barrel Stop Detent 
6 Extractor 
7 Extractor Pin 
8 Extractor Spring 
9 Firing Pin Block 
10 Firing Pin Block Spring 
11 Firing Pin Block Detent 
12 - 
13 - 
14 Rear Sight 
15 Firing Pin 
16 Firing Pin Spring 
17 Main Spring 
18 Main Spring Guide 
19 Firing Pin Insert 
20 Firing Pin Retainer 
21 Barrel 
22 Recoil Spring 
23 Recoil Spring Guide Rod 
24 Frame 
25 Slide Stop 
26 Slide Stop Spring 
27 Insert 28...