Home > Century international arms > Firearms > Century International Arms Centurion 99, Centurion 200 Sporter Technical Manual

Century International Arms Centurion 99, Centurion 200 Sporter Technical Manual

Here you can view all the pages of manual Century International Arms Centurion 99, Centurion 200 Sporter Technical Manual. The Century international arms manuals for Firearms are available online for free. You can easily download all the documents as PDF.

Page 1

Centurion 99 Sporter
And
Centurion 2000 Sporter
Cal. .308 Win.
Instruction Manual 

Page 2

This page is 
intentionally blank 

Page 3

Introduction
The Centurion 99 Sporter Rifle is built using genuine G3
parts and a U.S. manufactured made receiver with a scope
rail forged right in! The Centurion 2000 Sporter Rifle is built
using genuine G3 parts and a U.S. manufactured stamped
steel receiver. Both models have key U.S. manufactured
parts installed and conform to B.A.T.F. requirements. They
are semi-automatic only. Note: Magazines using U.S. manu-
factured floorplates and followers must be used to comply
with B.A.T.F. regulations....

Page 4

Always keep your Sporter in the Safe mode by setting the
safety lever to “S”. The trigger can not be pulled while in
the “S” mode. Never point your Sporter at anyone even in
the “S” mode.
To fire your Sporter, move the safety lever to the “F” posi-
tion and squeeze the trigger. Always be sure of your target
and the area beyond it.
Loading
Always put your  Sporter in the “S” (Safe Mode) position.
Pull the cocking bolt rearward and up, this engages it in the
recess of the cocking lever housing. Insert the...

Page 5

To reassemble the bolt reverse the above procedure and
push bolt head with the slanted surface under the tip of the
locking lever. Be sure that both locking rollers are in place
in the bolt head when reassembling.
To strip the grip assembly with the trigger mechanism, set
the safety point vertically up, then pull the lever out and
remove the grip assembly. 
Reassembly
Reattach the handguard and insert the assembled bolt with
the recoil spring into the receiver. Be sure that both locking
rollers are in...

Page 6

To adjust the windage point of impact, loosen the clamp
screw on top of sight base. Turn adjusting screw counter-
clockwise to adjust to the left or turn clockwise to adjust to
the right and retighten screw. 
SAFETY FIRST
Firearms can be dangerous and can cause serious injury or
death.  Proper and safe firearms handling is the responsibil-
ity of anyone who touches or uses a firearm.  Safety has to
be the primary consideration of anyone using a firearm.
When purchasing a firearm, you assume...

Page 7

Always use both ear and eye protection when
shooting.
Always use factory loaded ammunition designed for 
and intended to be used in the firearm you are shoot-
ing.  It must be the proper caliber and type for your 
firearm.
Always understand the proper operation of your 
firearm, and never allow the firearm to be used by 
anyone who does not understand how to use the 
firearm properly and safely.
Never pass a firearm to another person unless the 
action is open and the firearm is in an unloaded and 
safe...

Page 8

Distributed by:
Centur y International Arms, Inc.
P.O. Box 714
St. Albans, Vermont 05478
Tel: 1-800-527-1252
WWW.CENTURYARMS.COM
Centurion 99 / Centurion 2000 Sporter
Technical Specifications:
Caliber: .308 Win.
Rear sight: Apeture - adj. for elevation
Front sight: Hooded post
Barrel length: 19 1/4
Overall length: 40 1/2
Weight: 9.56 lbs. without magazine
HS-21999 
Start reading Century International Arms Centurion 99, Centurion 200 Sporter Technical Manual

Related Manuals for Century International Arms Centurion 99, Centurion 200 Sporter Technical Manual

All Century international arms manuals