Celluon Projector Picopro User Manual
Have a look at the manual Celluon Projector Picopro User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 2 Celluon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Table of Contents
1. Safety Precautions FCC Compliance Information
FCC Class Notice
FCC Caution
FCC RF Radiation Exposure Statement
Industry Canada Statement
CE Caution
IEC-60825-1 Caution
2. Certifications
3. Environmentally Friendly Disposal and Recycling
4. Package Contents
5. Product Features
6. Identifying Parts
7. Connecting PicoPro
a. Compatible Operating Systems
b. Wired Connection
c. Wireless Connection
d. Switching Connection Mode
e. Reset Switch
8. Making Adjustments a. Volume Adjustment
b. Speaker / Earphone Usage
c. Laser Alignment
d. APC Setting
e. Engine High Temperature Protection Mode
9. Charging the PicoPro
10. Troubleshooting
11. Specifications
12. Warranty
3
1. Safety Precautions This product is not waterproof – avoid using it near water or wet places. There is a risk of malfunction if product is used in places where sudden or extreme temperature changes occur. Applying excessive force or impact to this product may result in product damage, and will void warranty. Never attempt to disassemble or service this product yourself. Doing so can result in electrical shock and void warranty. This is a Class 3R Laser product. For your safety, do not stare directly into the laser source. Doing so could damage your eyes. FCC Compliance Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference to another device. 2. This device must accept any interference received, including interference that may cause undesired operation. FCC Class NoticeThis equipment has been tested and found to comply within the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and radiates radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur with special installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures: ■ Reorient or relocate the receiving antenna.■ Increase separation between the equipment and receiver.■ Connect the equipment to an outlet on a circuit different from which the receiver is connected.■ Consult the dealer or an experienced radio/TV technician. FCC CautionAny changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 4
FCC RF Radiation Exposure Statement:This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada StatementThis device complies with Industry Canada license- exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. CE CautionRisk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. IEC-60825-1 CautionUse of control or adjustments or performances of procedures other than those specified here in may result in hazardous radiation exposure. 5
2. Certifications KC : MSIP-CMM-CLK-PICOPROFCC ID : TCLPICOPROCE1177 compliantRoHSIC No : 10211A-PICOPROIEC-60825-1 : Class 3R Laser IEC-60825-1 : Class 3R Laser LASER APRETURE LASER RADIATION AVOID DIRECT EYE EXPOSURE CLASS 3R LASER PRODUCT Output: Red(90mW)/Blue(85mW)/Green(50mW) λ= Red(639nm)/Blue(445nm)/Green(522nm) Pulse frequency : 60HzIEC 60825-1:2007 3. Environmentally Friendly Disposal and Recycling To protect the environment, dispose this product separately from household waste once it has reached its end of life, or take it to your local electronic waste disposal center. Built-in Battery Use supplied USB power adapter to begin charging the battery. Battery status is indicated by four blue LED indicators while charging. (4 LED : 100% / 3 LED : 75% / 2 LED : 50% / 1 LED : 25%)3140 mAh @ 3.7V Battery CapacityApprox. 120 minutes (with continuous use) Battery Operating TimeRechargeable Lithium-ion Polymer Battery Battery Type Approx. 270 minutes Battery Charging Time Charging the Battery 6
4. Package Contents 5. Product Features PicoPro is a laser-based HD pico projector that always stay focused and easily fits in your pocket. It enables you to share contents from your mobile device onto any surface via HDMI connection or Miracast (Screen Mirroring) capability. PicoProUser Manual Power Adapter Holding MountPouch MHL Cable 7
6. Identifying Parts Reset Button LASER APRETURELASER RADIATION AVOID DIRECT EYE EXPOSURE CLASS 3R LASER PRODUCT Output: Red(90mW)/Blue(85mW)/Green(50mW) λ= Red(639nm)/Blue(445nm)/Green(522nm) Pulse frequency : 60Hz IEC 60825-1:2007 Laser radiates from this aperture FCC ID : TCLPICOPRO CE1177 KC : MSIP-CMM-CLK-PICOPRO IC : 10211A-PICOPRO Model : PicoPro DC : 5V 2A Celluon, Inc. Made in Korea Touch-sensitive Volume Up Touch-sensitive Volume Down Backlit Battery Indicator Light Speaker MHL/HDMI cable input3.5mm Audio Out Battery Status Indicator CHARGE – Micro USB port for charging Power Button Mode Switch Button8
7. Connecting PicoPro a. Compatible Operating Systems Miracast For HDMI Connection Any digital device that supports HDMI capability DLNAFor Wireless Connection Android OS 4.2 or later Windows OS 8.1 or higher Any OS that supports Screen Mirroring functionality Any digital device that supports DLNA protocol * Using DLNA connection requires downloading DLNA streaming app from the App Store or Play Store. b. Wired Connection**For proper operation of PicoPro, please do not insert HDMI cable during Miracast connection. Using HDMI Connection :Use plug-n-play connection for any digital/mobile device via HDMI connection. 1. Turn on PicoPro by pressing the power button for about 2-3 seconds. 1 2. Celluon logo will display upon powering on, followed by a “Preparing wireless connection… To go to HDMI mode, press Mode Switch button” screen. 2 9
3. Press and hold “Mode Switch” button located next to power button for 2~3 seconds to change to HDMI mode. 5. Locate MHL/HDMI port on the PicoPro and use supplied HDMI cable to connect to a device. 6. PicoPro will start mirroring contents from connected device. 4. PicoPro is now in HDMI mode. 3 * For Apple devices, please use additional Apple Digital AV Adapter to connect via HDMI cable. * For Samsung devices, please use supplied Samsung adapter (5pin to 11pin converter) to connect to MHL/HDMI cable. *During the use of PicoPro via supplied MHL cable, connected mobile device may charge from PicoPros internal battery. It is recommended to supply power via USB port on supplied MHL cable to maintain PicoPros operating time. 4 5 10