Casio Ravine 2 User Manual

38 
01
02
39 
02
03
04
05
Main Menu 2nd DEPTH 3rd DEPTH 4th DEPTH3.  Phone Lock 
Setting
4. Lock Phone Now
5. Restore Phone
9. SIM Security 1. PIN Code
2. SIM Lock
10. 
 Gl

obal Data 
Roaming
11. System Select 1.* Network Mode
2.* CDMA Settings
3.* GSM Settings
12. Motion Detection 1. G'zGEAR
2. My Pics/Videos
10. Call Settings 1. Answer options
2. Auto Retry
3. TTY Mode
4. One Touch Dial
5. Voice Privacy
6. DTMF Tones
7. PTT Mode
8. Assisted Dialing
9. Noise Reduction
* These options will not...

40 
01
02
41 
02
03
04
05
MAKING A CALL
BY DIALING ThE PhONE NUMBER1.   First, gently open the folding cover of the phone.
2 .   En ter the phone number including the area code if needed and press the SEND key G.
3.   To
 end the call, press the END/PWR key H.   When you place or receive a call from phone numbers stored in your Contact List, the 
n ame will be displayed.
USING ThE SPEED DIALING FUNCTION1.   If the speed dial is set, press the speed dial number you wish to connect to, and 
h old the last...

42 
01
02
43 
02
03
04
05
3.   Press and hold the PTT key /Red Side key N while talking and then release 
the PTT key/Red Side key N to let the other party talk.
USING ThE PTT CONTACT LIST1.   From the idle mode, press the PTT key/Red Side key N to access your PTT 
Contact List.
2.
   Se

lect the contact and press the 
Left Soft key C [Alert].“Press PTT Key To Alert” message appears on your main display screen.
3.  Press and hold the  PTT key /Red Side key N while talking and then release 
the PTT...

44 
01
02
45 
02
03
04
05
1.   Answer or ignore the alert. 
T o answer the alert, press and hold the PTT key/Red Side key N and begin 
talking. 
To ignore the alert, press the 
Right Soft key D [Ignore].
2. Re
lease the PTT key/Red Side key N to let the other party talk.
3. Pr
ess the END/PWR key H to end the call.
ENDING A CALL 1.   Press the END/PWR key H.
MISSED CALL NOTIFICATIONWhen an incoming call is not answered, the missed call notification appears on the 
display.
DISPLAY ThE MISSED CALL FROM...

46 
01
02
47 
02
03
04
05
3.   When you’re connected to the second party, press the SEND key G again to 
begin your 3-Way call.
   If one of the participants hangs up during the call, you and the remaining participant 
s
tay connected. If you initiated the call and are the first one to hang up, all three calls 
are disconnected.
CALL WAITINGIf you are on a call and you receive another incoming call, you will hear one beep and 
the caller’s phone number will appear on the display. With Call Waiting, you...

48 
01
02
49 
02
03
04
05
VOICE DICTATIONBy using the voice dictation function, you can input the text by speaking your words 
instead of using the keypad. 
1.   Press the Left Soft key C [Message], select New Message and press the Center Select key [O K].
2.   Se
lect the desired message type to send and press the Center Select key [ O K].
3.   En
ter the email address or phone number in the “To” field and press the Center 
Select key
 [ OK ]. 
4.   In
 the Text field, press and hold the Voice Commands...

50 
01
02
51 
02
03
04
05
MAKING AN EMERGENCY CALLThe 911 feature automatically places the phone in Emergency Call Mode when you dial 
the preprogrammed emergency number, 911. It also operates in Lock Mode and out of 
the service area.
MAkING AN EMERGENCY CALL IN LOCk MODE 1.   Enter any of the numbers 9 11, *911 , #911  or 112  and press the SEND key G.   The phone maintains Emergency Mode for 5 minutes. When the call ends, the phone 
r
eturns to Lock Mode.
MAkING AN EMERGENCY CALL IN ANY NETWORk MODE1....

CHAPTER 3. MEMORY FUNCTION
3
STORING A PHONE NUMBERTEXT INPUT
USING THE TEXT INPUT MODE
ONE, TWO, THREE DIGIT SPEED DIALING
This chapter addresses memory functions including:MEMORY FUNCTION   

54 
02
01
04
05
02
03
55 
STORING A PHONE NUMBER
ADDING A NEW CONTACT 1. Enter the phone number you want to save.
2 . Pr ess the Left Soft key C [Save].   If PTT Mode is set to on, you must access by pressing the Right Soft key D select  Save 
To Contacts  and press the Center Select key [OK ] as the Left Soft Key will show as Alert.3. Select Add New Contact and press the Center Select key [ O K].4.   Select the type of number and press the Center Select key [ O K], then enter the 
name of contact.
- You...

56 
02
01
04
05
02
03
57 
ADDING OR ChANGING ThE PICTURE IDTo select a picture or graphic to assign to a Caller ID:1.   Press the Right Soft key D [Contacts], then select the contact you want to 
edit.
2.
   Pr

ess the 
Left Soft key C [Edit].
3.   Se
lect the Picture and press the Left Soft key C [Set].
4.   Se
lect the picture to set and press the Left Soft key C [View] to view the 
selected picture.
5.
   Pr

ess the 
Center Select key [ O K] to select the image.
6.   Pr
ess the Center Select key...