Casio Qv R51 Users Guide

FILE MANAGEMENT
111
4.Use [] and [] to
select “On”, and then
press [SET].
•A file that is protected is
indicated by the 
mark.
•To unprotect a file, select
“Off” in step 4, and then
press [SET].
5.Press [MENU] to exit the menu screen.
Protecting Files
Once you protect a file it cannot be deleted (page 108).
You can protect files individually or you can protect all files
in memory with a single operation.
To protect a single file
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab,
select...

FILE MANAGEMENT
112
To protect all files in memory
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Protect”, and
then press [].
3.Use [] and [] to select “All Files : On”, and
then press [SET].
•To unprotect all files, press [SET] in step 3 so the
setting shows “All Files : Off”.
4.Press [MENU] to exit the menu screen.
DPOF
The letters “DPOF” stand for “Digital Print
Order Format”, which is a format for
recording on a memory card or other medium
which digital camera images should...

FILE MANAGEMENT
113
5.Use [] and [] to specify the number of
copies.
•You can specify up to 99 for the number of copies.
Specify 00 if you do not want to have the image
printed.
6.To turn on date stamping for the prints, press
[DISP] so 12121 is displayed.
•To turn off date stamping for the prints, press [DISP]
so 12121 is not displayed.
•Repeat steps 4 through 6 if you want to configure
other images for printing.
7.After all the settings are the way you want,
press [SET] to apply them.
To configure...

FILE MANAGEMENT
114
To configure print settings for all images
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “DPOF”, and
then press [].
3.Use [] and [] to select “All images”, and
then press [].
4.Use [] and [] to
specify the number of
copies.
•You can specify up to 99
for the number of copies.
Specify 00 if you do not
want to have the image
printed.
5.To turn on date stamping for the prints, press
[DISP] so 12121 is displayed.
•To turn off date stamping for the prints, press...

FILE MANAGEMENT
115
Exif Print
Exif Print is an
internationally supported,
open standard file format
that makes it possible to
capture and display vibrant
digital images with accurate
colors. With Exif 2.2, files
include a wide range of
shooting condition
information that can be
interpreted by an Exif Print
printer to produce better-
looking prints.
 IMPORTANT! 
•Information about the availability of Exif Print
compatible printer models can be obtained from each
printer manufacturer.
PRINT Image Matching...

FILE MANAGEMENT
116
Using USB DIRECT-PRINT
Your camera supports USB
DIRECT-PRINT, which was
developed by Seiko Epson
Corporation. When connected
directly to a printer that supports
USB DIRECT-PRINT, you can
select images to be printed and
start the print operation directly
from the camera.
DPOF settings (page 112) are used
to determine which images and how
many copies should be printed.
 IMPORTANT! 
•Use of the optional AC adaptor (AD-C30) is
recommended when printing with USB DIRECT-
PRINT.
USB
USB...

FILE MANAGEMENT
117
3.Use the USB cable that comes with the
camera to connect it to a printer.
4.Turn on the printer.
5.Load paper for printing the images into the
printer.
6.Press the camera’s
power button.
•This displays the print
menu on the camera’s
monitor screen.
7.On the camera’s monitor screen, select
“Print”, and then press [SET].
•This automatically starts printing of the images you
specified with the DPOF procedure.
•If you want to print the same batch of images again,
press the power button...

FILE MANAGEMENT
118
 IMPORTANT! 
•See the documentation that comes with your printer
for information about print quality and paper settings.
•Contact your printer manufacturer for information
about models that support USB DIRECT-PRINT,
upgrades, etc.
•Never disconnect the USB cable, or perform any
camera operation while printing is in progress. Doing
so causes a printer error.
•To interrupt an ongoing print operation, perform the
required operation on the printer.
•The camera’s monitor screen will go...

FILE MANAGEMENT
119
3.Use [] and [] to
select “Save”, and
then press [SET].
•This displays the names
of the files in built-in
memory or on the loaded
memory card.
4.Use [
] and [] to select the file you want to
copy to the FAVORITE folder.
5.Use [] and [] to select “Save”, and then
press [SET].
•This copies the displayed file to the FAVORITE
folder.
6.After copying all of the files you want, use []
and [] to select “Cancel”, and then press
[SET] to exit.
 NOTES 
•Copying an image file with the...

FILE MANAGEMENT
120
To display a file in the FAVORITE folder
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Favorites”, and
then press [].
3.Use [] and [] to select “Show”, and then
press [SET].
•If the FAVORITE folder is empty, the message “No
Favorites file!” appears.
4.Use [] (forward) and
[
] (back) to scroll
through the files in the
FAVORITE folder.
5.After you are finished viewing files, press
[MENU] twice to exit.
File Name
 NOTE 
•Holding down [
] or [] scrolls images at...