Casio QV R51 User Manual

FILE MANAGEMENT
121
To delete a file from the FAVORITE
folder
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Favorites”, and
then press [].
3.Use [] and [] to select “Show”, and then
press [SET].
4.Press [] ( ).
5.Use [
] and [] to select the file you want to
delete from the FAVORITE folder.
6.Use [] and [] to select “Delete”, and then
press [SET].
•To exit the file delete operation without deleting
anything, select “Cancel”.
7.After deleting all of the files you want, use []...

FILE MANAGEMENT
122
To delete all files from the FAVORITE
folder
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Favorites”, and
then press [].
3.Use [] and [] to select “Show”, and then
press [SET].
4.Press [] ( ).
5.Use [] and [] to select “All File Delete”, and
then press [SET].
 IMPORTANT! 
•You cannot use the delete operations on page 108 to
delete images from the FAVORITE folder.
Performing the memory format operation (page 135),
however, does delete FAVORITE folder files....

OTHER SETTINGS
123
OTHER SETTINGS
Specifying the File Name Serial Number
Generation Method
Use the following procedure to specify the method for
generating the serial number used for file names (page
110).
1.In the REC mode or the PLAY mode, press
[MENU].
2.Select the “Set Up” tab, select “File No.”, and
then press [].
3.Use [] and [] to change the setting, and
then press [SET].
Select this setting:
Continue
Reset
To do this for a newly saved file:
Store the last file number used and
increment it,...

OTHER SETTINGS
124
Specifying an Image for the Startup Screen
You can specify an image you recorded as the startup
screen image, which causes it to appear on the monitor
screen for about two seconds whenever you press the
power button or [
] (REC) to turn on the camera. The
startup screen image does not appear if you press []
(PLAY) to turn on the camera.
1.In the REC mode or the PLAY mode, press
[MENU].
2.Select the “Set Up” tab, select “Startup”, and
then press [].
3.Use [
] and [] to display the...

OTHER SETTINGS
125
 IMPORTANT! 
•The snapshot image or movie that you select as the
startup image is stored in a special memory location
called “startup image memory”. Only one image can
be stored in startup image memory at one time.
Selecting a new startup image overwrites anything
that is already stored in startup image memory.
Because of this, if you want to return to a previous
startup image, you need to have a separate copy of
that image in the camera’s standard image memory.
Note that you cannot...

OTHER SETTINGS
126
 IMPORTANT! 
•Only a snapshot (JPEG) or movie (AVI) file can be
used as the power down image.
•Note that the Power Down Image feature works only
with images recorded with this camera. The Power
Down Image feature may not operate properly when
another type of image is specified as the power down
image.
•Formatting the camera’s Flash memory deletes the
power down image.
•When both a still image and a movie are present for
the power down image, only the movie is used.
•Note that a power...

OTHER SETTINGS
127
Using the Alarm
You can configure up to three alarms that cause the
camera to beep and display a specified image at the time
you specify.
To set an alarm
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Alarm”, and
then press [].
3.Use [] and [] to select the alarm whose
setting you want to configure, and then press
[].
4.Use [
] and [] to select the setting you want
to change, and then use [] and [] to
change the selected setting.
•You can set an alarm time...

OTHER SETTINGS
128
5.Press [DISP].
•You could press [SET] in place of [DISP] if you want
to configure the alarm without an image.
6.Use [
] and [] to select the scene you want
to appear at the alarm time, and then press
[SET].
7.After all the settings are the way you want,
press [SET].
•You can configure up to three alarms, named “Alarm
1”, “Alarm 2”, and “Alarm 3”.
Stopping the Alarm
When an alarm time is reached while the camera is turned
off, the alarm will sound for about one minute (or until you...

OTHER SETTINGS
129
Setting the Clock
Use the procedures in this section to select a Home Time
Zone, and to change its date and time settings.
 IMPORTANT! 
•Make sure you select your Home Time zone (the
zone where you are currently located) before
changing the time and date settings. Otherwise, the
time and date setting will change automatically when
you select another time zone.
To select your Home Time zone
1.In the REC mode or the PLAY mode, press
[MENU].
2.Select the “Set Up” tab, select “World...

OTHER SETTINGS
130
Changing the Date Format
You can select from among three different formats for
display of the date.
1.In the REC mode or the PLAY mode, press
[MENU].
2.Select the “Set Up” tab, select “Date Style”,
and then press [].
3.Use [] and [] to change the setting, and
then press [SET].
Example: December 24, 2003
Select this format:
YY/MM/DD
DD/MM/YY
MM/DD/YY
To display the date like this:
03/12/24
24/12/03
12/24/03
To set the current time and date
1.In the REC mode or the PLAY mode, press...