Casio Px5 Manual

E-30
Recording and Playing Back Phrases (Tutorial)
2.Edit the song as desired.
To configure mixer settings, select “Song Mixer”.
The parameters of the mixer settings are described in the table below.
Display TextDescriptionSetting
Bank Select MSBBank select MSB. Specifies the bank select MSB number.
 To specify a tone on the song mixer screen, specify “Bank Select MSB” and 
“Program Change” numbers, referring to the “Tone List” at the back of this 
manual.0 - 127
Program ChangeProgram change. Specifies...

E-31
Using the Stage Setups (Tutorial)
1.Select the bank and stage setup number you want.
2.Edit the stage setups as desired.
The following describes each of the editable parameters.
Editable Parameters
To edit a stage setup
Display TextDescriptionSettings
Zone Edit >Ent
Zone parameter edit. This group includes parameters for Zone 1 through 4.

dk (ZONE) minus (–) and plus (+) buttons to select the zone you 
want to edit.
Mixer Edit >EntMixer edit. This group includes parameters for the mixer within...

E-32
Using the Stage Setups (Tutorial)
Key Range HighKey Range High. Specifies the high range of the keyboard for each zone. 
This setting is used in combination with the Key Range Low setting to 
configure key ranges for each zone.
 After pressing the 
en (NUM KEY) button to enter the number input 
mode, you can use the keyboard keys to enter values.C- - G9
Velo.Range LowVelocity range low. This is the minimum velocity value of each zone. This 
setting is used in combination with the Velo.Range High...

Using the Stage Setups (Tutorial)
E-33
Pedal2 EnablePedal 2 on/off (pedal 2 enable). Enables/disables of fk (PEDAL 2) for each 
zone.Off, On
Arpeggio 
EnableArpeggio on/off (arpeggio enable). Enables/disables arpeggio function 
(page E-24) for each zone.Off, On
Arpeggio Select 
>EntArpeggio select. This is a group of editable arpeggio function parameters.
TargetTarget. Selects playback of an arpeggio (Arp) or phrase sequencer (Phr) by 
the arpeggio function. For details, see “To play a recorded phrase as...

E-34
Using the Stage Setups (Tutorial)
Master Effect Edit >Ent
Master effect parameter. This is a group of editable master effect parameters 
(page E-23). For details about group items, see “Editable MASTER 
Parameters” (page E-23).
Compressor Edit 
>EntCompressor edit. This is a group of editable compressor parameters within 
master effects.
Equalizer Edit >EntEqualizer edit. This is a group of editable equalizer parameters within 
master effects.
Common Edit >EntThis is a group of editable pedal, PRN,...

Using the Stage Setups (Tutorial)
E-35
Slider1-6 Edit >Ent
Slider 1 to 6 edit. This is a group of 4 Slider (S1) through 9 Slider (S6) 
editable parameters. Editing can be performed even when the “Slider 1-6 
Enable” setting is “Off”. Details of editable parameters are the same as 
“Knob1 Edit >Ent”, above.
Modulation Edit 
>Ent
Modulation wheel (modulation wheel edit). This is a group of 2 
(MODULATION) wheel editable parameters. Editing can be performed 
even when the “Wheel Enable” setting is “Off”....

E-36
Other Useful Functions (Tutorial)
In addition to the system setting screen described in the 
USER’S GUIDE (Basics), the settings listed below, 
which also affect Digital Piano global settings, can also 
be configured.
Mixer function
Temperament
Touch sensitivity adjustment
Stage setup filter
MIDI functions
Digital Piano information (Check of system version 
in built-in memory, firmware update)
The mixer lets you make adjustments to the tone, 
volume level, and other settings* of the Digital Piano’s...

Other Useful Functions (Tutorial)
E-37
Setting Items
Display TextDescriptionSettings
Tuning Tuning. Fine tuning of global pitch in 0.1 Hertz steps. 415.5 - 465.9Hz
Master Volume Master volume. Adjusts the volume of all the parts. 0 - 127
Master PanMaster panning (master panning). Adjusts the left-right position of sound in the 
stereo field of all the parts.–64 - 0 - +63
External Volume External input volume setting. 0 - 127
Mixer Part1-16 >Ent
Mixer Part 1 through Mixer Part 16. These are setting items...

E-38
Other Useful Functions (Tutorial)
This item is for adjusting how much the sound volume 
and timbre changes, and how it changes in accordance 
with keyboard pressure.
1.Press the bm (SYS SETTING) button.
2.Use the ds (u), dt (w), ek (q), and el 
(i) buttons to select “General”.
3.Press the em (ENTER) button.
4.Use the ds (u), dt (w), ek (q), and el 
(i) buttons to select a setting item.
Setting Item
5.Change the setting.
6.After settings are the way you want, press the 
bm (SYS SETTING) button to...

Other Useful Functions (Tutorial)
E-39
7.After settings are the way you want, press the 
bm (SYS SETTING) button to exit the setting 
screen.
What is MIDI?
MIDI is a standard for digital signals and connectors 
that allows musical instruments, computers, and other 
devices, regardless of manufacturer, to exchange data 
with each other.
For details about the MIDI specifications of this Digital 
Piano, see the “MIDI Implementation” document at the 
website located at the URL below.
http://world.casio.com/...