Casio Projector XJ-UT310WN User Manual

21
To format projector internal memory (Windows users only)
Important!zPerforming the procedure below will delete all of the folders and files currently in the projector 
internal memory.
1.Perform steps 1 through 7 under “To copy files from a computer to projector 
internal memory” (page 18).
2.Perform one of the procedures below to format the “InternalMem” drive on your 
computer.
Projecting Files from a Memory Device Connected by USB
Use the procedures in this section when you want to use File Viewer...

22
To connect a USB flash drive to the projector
Connect USB flash drive to the Data Projector’s USB-A port as shown below.
To connect a memory card to the projector
1.Load the memory card into a USB card reader’s card slot.
zFor details about how to load a memory card into the USB card reader, see the user 
documentation that comes with the reader.
2.Connect the USB card reader to the Data Projector’s USB-A port.
To connect a digital camera to the projector
1.If necessary, configure the digital camera’s...

23
To start projection of files that are on a memory device 
connected via USB
1.Connect the memory device where files you want to project are stored to the 
projector’s USB-A port.
zIf the File Viewer main screen appears automatically, advance to step 5 of this procedure. If it 
doesn’t, go to step 2. Note that the File Viewer main screen will appear automatically if “On” is 
selected for the “Plug and Play” setting on the projector’s Setup Menu.
2.Press the [INPUT] key. This will display the “Input”...

24
8.Depending on the function you selected in step 5 of this procedure, perform one 
of the operations below.
Drive Menu
Entering the Presentation Mode, PDF Viewer Mode, Slide Mode, or Movie Mode while there are 
multiple memory devices connected to the Data Projector’s USB-A port (multiple USB flash drive 
devices connected via a USB hub, multiple memory cards loaded in the memory card reader 
connected to the Data Projector, etc.) will cause a menu like the one shown below to appear on the 
projection...

25
Projecting Files
This section explains procedures you can project each type of file using File Viewer.
To project a presentation file
1.On the File Viewer main screen, select “Presentation” and then press the 
[ENTER] key.
zThis displays a menu of presentation (ECA or PtG) files.
2.Use the [T] and [S] keys to select the presentation file you want to play and then 
press the [ENTER] key (or [ ] key).
zThis will start playback of the currently selected presentation file.
3.Perform page change and other...

26
To project a PDF file
1.On the File Viewer main screen, select “PDF Viewer” and then press the [ENTER] 
key.
zThis displays a list of PDF files.
2.Use the [T] and [S] keys to select the PDF file you want to open and then press 
the [ENTER] key (or [ ] key).
zThis will open the selected PDF file.
3.Perform page change, zoom, and other operations as required.
zThe following operations are supported during PDF file projection.
4.To return to the file menu, press the [ESC] key.
5.To return to the main...

27
To project an image file
1.On the File Viewer main screen, select “Slide” and then press the [ENTER] key.
zThis displays a list of image files.
2.Use the [T] and [S] keys to select image file you want to open and then press 
the [ENTER] key.
zThis will project the selected image file.
zPressing the [ ] key instead of the [ENTER] key will start an image file slideshow starting 
from the currently selected file.
3.Perform the rotate image and image scrolling operations described below as 
required.
zThe...

28
3.Perform fast forward, fast reverse, pause, and other operations as required.
zThe operations described below are supported during movie file playback.
4.To return to the file menu, press the [ESC] key.
5.To return to the main screen, press the [FUNC] key and then the [ENTER] key.
To do this:Perform this operation:
Pause and resume movie playback Press the [ENTER] or [ ] key.
zA pause icon ( ) is displayed in the upper left 
corner of the projection screen while movie 
projection is paused.
Re-play...

29
File Menu Operations
There are two different views for the File Viewer file menu: a list view and an icon view.
List View
This view shows a list of names of folders and files in the projector internal memory, or on memory 
device connected to the projector’s USB port. Folders and files are displayed in this format 
immediately after you go from the File Viewer main screen to the Presentation Mode, PDF Viewer 
Mode, Slide Mode, or Movie Mode.
Icon View
This view shows both icons and names for the...

30
Configuring File Viewer Settings
This section explains how to configure File Viewer settings, including those that control what appears 
on the File Viewer file menu.
To configure File Viewer settings
1.On the File Viewer main screen, select “Viewer Settings” and then press the 
[ENTER] key.
zThis displays the “Viewer Setup” screen.
2.Use [T] and [S] to select the item whose setting you want to change.
3.Use [W] and [X] to change the currently selected setting.
zFor information about the settings...