Casio Projector XJ-ST145 XJ-ST155 User Manual

							DATA PROJECTOR
XJ-H1600/XJ-H1650*
XJ-ST145*/XJ-ST155*
User’s Guide
zBe sure to read the precautions in the separate Setup Guide. For 
details about setting up the projector, see the Setup Guide.
zBe sure to keep all user documentation handy for future 
reference.
E
* USB Port Models 
						

							2
zDLP is a registered trademark of Texas Instruments of the United States.
zMicrosoft, Windows, and Windows Vista are registered trademarks or trademarks of Microsoft 
Corporation in the United States and other countries.
zHDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered 
trademarks of HDMI Licensing, LLC.
zXGA is a registered trademark of IBM Corporation of the United States.
zPJLink is a trademark applied for registration or is already registered in Japan, the United States 
of America and other countries and areas.
zCrestron is a registered trademark of Crestron Electronics, Inc. of the United States.
zAMX is a registered trademark of AMX LLC of the United States.
zOther company and product names may be registered product names or trademarks of their 
respective owners.
zPortions of this product are based in part on the work of the Independent JPEG Group.
zThe contents of this User’s Guide are subject to change without notice.
zCopying of this manual, either in part or its entirety is forbidden. You are allowed to use this 
manual for your own personal use. Any other use is forbidden without the permission of CASIO 
COMPUTER CO., LTD.
zCASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims from third 
parties arising out of the use of this product or this manual.
zCASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to loss of 
data due to malfunction or maintenance of this product, or any other reason.
zThe sample screens shown in this manual are for illustrative purposes only, and may not be 
exactly the same as the screens actually produced by the product.
zUnless specifically stated otherwise, all illustrations in this manual show the XJ-H1650. 
						

							3
Contents
About this manual... ...............................................................................5
Projector Overview ......................................................... 6
Projector Features and Main Functions .................................................6
Remote Controller and Projector Keys...................................................8
Back Terminals .......................................................................................9
Operation During Projection ........................................ 10
Selecting the Input Source ...................................................................10
To select a different input source .............................................................................. 10
3D Input Mode ........................................................................................................... 11
Horizontal Flipping in the 3D Input Mode .................................................................. 12
Image Operations During Projection ....................................................13
Adjusting Image Brightness ....................................................................................... 13
Selecting the Color Mode .......................................................................................... 14
Zooming an Image ..................................................................................................... 14
Momentarily Cutting Off the Input Source Image ...................................................... 15
Freezing an Image...................................................................................................... 15
Displaying a Pointer in the Projected Image .............................................................. 16
Changing the aspect ratio of the projected image .................................................... 17
Adjusting the Volume Level ..................................................................18
To adjust the volume level ......................................................................................... 18
To mute the audio ...................................................................................................... 18
Eco Mode (Power Saving, Low Noise) .................................................19
To select the Eco Mode ............................................................................................. 19
Using the [FUNC] Key ..........................................................................20 
						

							4
Configuring Advanced Projector Settings .................. 21
Basic Setup Menu Operations .............................................................21
Displaying the Setup Menu ........................................................................................ 21
Configuring Setup Menu Settings.............................................................................. 21
Basic Setup Menu Example....................................................................................... 22
Direct Power On......................................................................................................... 23
Password Protecting the Projector ......................................................24
Inputting a Password ................................................................................................. 24
Using the Password Feature...................................................................................... 24
Entering the Password when Turning On the Projector ............................................ 26
Restoring Projector Settings to Their Initial Factory Defaults ..............27
Setup Menu Contents ..........................................................................29
Image Adjustment 1 Main Menu ................................................................................ 29
Image Adjustment 2 Main Menu ................................................................................ 31
Volume Adjustment Main Menu ................................................................................. 31
Screen Settings Main Menu....................................................................................... 32
Input Settings Main Menu .......................................................................................... 34
Option Settings 1 Main Menu .................................................................................... 35
Option Settings 2 Main Menu .................................................................................... 36
Wired LAN Settings Main Menu (USB Port Models Only) ......................................... 38
USB Settings Main Menu (USB Port Models Only) ................................................... 38
Operational Info Main Menu ...................................................................................... 39
Restore All Defaults Main Menu................................................................................. 39
Cleaning the Projector.................................................. 40
Cleaning the Projector Exterior ............................................................40
Cleaning the Lens.................................................................................40
Cleaning the Vents ...............................................................................40
Error Indicators and Warning Messages .................... 41 
						

							5
Appendix ........................................................................ 44
Connecting to a Video Device ..............................................................44
Connection to a composite video output or S-video output ..................................... 44
Connection to a component video output ................................................................. 45
Connecting the HDMI Output of a Video Device or Computer to the 
Projector ...............................................................................................46
Remote Controller Signal Range ..........................................................47
Hanging the Projector from a Ceiling ...................................................48
Projection Distance and Screen Size ...................................................49
Aspect Ratio Setting and Projection Image .........................................50
Supported Signals ................................................................................52
Using Wired LAN to Control the Projector 
(XJ-H1650, XJ-ST145, XJ-ST155) ........................................................55
Supported External Devices ...................................................................................... 55
Controlling the Projector from a Computer ............................................................... 55
Projector RS-232C Control ..................................................................60
Connecting the Projector to a Computer................................................................... 60
Specifications .......................................................................................63
All of the operations in this manual are explained using the remote controller that comes with the 
projector.
About this manual... 
						

							6
Projector Overview
This section describes the features of the projector, and explains the functions of the projector and 
remote controller keys.
XJ-H1600/XJ-H1650/XJ-ST145/XJ-ST155
zMercury-free Hybrid Light Source:
A CASIO-original laser and LED hybrid light source delivers high luminance from 2500 to 3500 
lumens. This projector does not use a mercury lamp, making it environmentally friendly.
zA wide selection of input sources:
Analog RGB, composite video, S-video, component video (Y·Cb·Cr, Y·Pb·Pr), and HDMI input 
sources are supported.
zIntelligent Brightness Control function (Eco Mode):
The projector senses surrounding light levels and adjusts projection brightness automatically as 
required for efficient low-power operation. (Requires “Eco Mode” setting to be set to “On (Auto)”.)
z3D image projection support:
Projection of a 3D image signal (60Hz/120Hz field sequential protocol) via one of three input 
sources (analog RGB, composite video, S-video) is supported.
zPointer:
The remote controller can be used to select one of a variety of different pointers for use during 
projection.
zDirect Power On:
The projector can be configured to turn on automatically and start projecting as soon as it is 
plugged into a power outlet.
Projector Features and Main Functions
*Separately available 3D glasses (YA-G30) are required in order to view a projected 3D image in 
3D. Also, separately available special software (CASIO 3D Converter) is required to project a 3D 
image with the projector when a computer (analog RGB) is the input source. 
						

							7
XJ-H1650/XJ-ST145/XJ-ST155
zProjection of Data from USB Memory or a Memory Card without a Computer:
USB memory or a memory card (using a commercially available USB card reader) can be connected 
directly to the projector’s USB-A port. The projector comes with special software for converting 
PowerPoint presentation data to a format that can be stored to USB memory or a memory card and 
projected without using a computer. Images and movies also can be projected directly from USB 
memory or a memory card.
zInteractive Pointing Function:
You can use a separately available interactive pointer (YA-P10) to draw lines and figures directly on 
an image being projected by the projector from a connected computer. You can also use the 
pointer to perform mouse operations.
zMulti Projection Camera (YC-400, YC-430) Connection:
A CASIO Multi Projection Camera can be connected directly to the projector’s USB-A port for fine 
resolution projection of documents and other images. Document camera capabilities allow 
projection of data without going through a computer.
zGraphic Scientific Function Calculator Connection:
Certain CASIO graphic scientific calculator models can be connected directly to the projector’s 
USB-A port for projection of the calculator screen contents.
zProjection of Computer Screen Contents via Wireless LAN:
The projector comes with a wireless LAN adapter. After a wireless LAN connection is established, 
the contents of the computer screen can be sent to the projector for projection.
zSupport for Wireless projection from MobiShow:
You can install AWIND’s MobiShow (client software for wireless connection to a projector) on a 
smartphone or mobile terminal, and then use the projector to project photographs and presentation 
files stored in the smartphone or terminal memory.
zProjector operation via wired or wireless LAN:
Remote control of the projector is supported via a wired connection to the LAN port on the back or 
the projector or via wireless LAN.*Note that the type of terminal and the MobiShow version can limit certain functions or can even 
make projection impossible. 
						

							8
Operations in this manual are presented based on the remote controller that comes with the projector. 
Major operation keys are also provided on the projector unit, so the most of the same procedures can 
also be performed directly on the projector.
Remote Controller Keys
The remote controller does not come with batteries loaded. You need to load the two supplied 
batteries before use.
Important!To avoid running down the batteries, store the remote control unit so its keys are not pressed 
inadvertently.
Projector Keys and Indicators
Remote Controller and Projector Keys
Remote control signal emitter
CLASS 1 LED PRODUCT
Cursor keys (S/T/W/X)
[ENTER] key ([STYLE] key)
[D-ZOOM +] [D-ZOOM –] keys
[KEYSTONE +] [KEYSTONE –] keys
[POINTER] key
[FUNC] key
[AUTO] key
[BLANK] key
[FREEZE] key
[COLOR MODE] key
[VOLUME] key
[BRIGHT] key ([O] key)
[ECO] key ([f] key)
[ASPECT] key ([Z] key)
[INPUT] key
[MENU] key
[P] (Power) key
[ESC] key
TEMP indicator
LIGHT indicator[ENTER] key
POWER/STANDBY indicator[MENU] key
[P] (Power) key[ESC] key
[INPUT] key Cursor keys (q/w/U/I)
[AUTO] key 
						

							9
1 USB-A port (XJ-H1650/XJ-ST145/XJ-ST155 only)
2 LAN port (XJ-H1650/XJ-ST145/XJ-ST155 only)
3 HDMI port
4 MONITOR OUT terminal
5 COMPUTER IN 1 terminal
6 COMPUTER IN 2 terminal
7 Remote control signal receiver
8 Power connector
9 SERIAL port*1
bk AUDIO OUT terminal
bl Anti-theft lock hole
bm AUDIO IN 1 terminal
bn AUDIO IN 2 terminal
bo AUDIO IN L/R terminals
bp VIDEO terminal
bq S-VIDEO terminal
br USB-B port*2 (XJ-H1650/XJ-ST145/XJ-ST155 only)
Back Terminals
*1  This terminal is for controlling the projector from an external device. It normally is not used. For 
information about using control commands and other details, See “Projector RS-232C Control” 
(page 60).
*2  This port is for USB connection between the projector and a computer when using the optionally 
available interactive pointer (YA-P10).
8 7 9 bk bl bmbn bp bq brbo 123 4 5 6 
						

							10
Operation During Projection
Turning on the projector initially causes the same input source that was selected the last time it was 
turned off to be selected.
To select a different input source
1.Press the [INPUT] key.
zThis displays the input source selection screen.
2.Select either the Normal Input Mode or 3D Input Mode depending on the type of 
image you want to project.
zFor details about the 3D Input Mode, see the explanation in the following section.
3.Use the [T] and [S] keys to select the name of the input source you want to 
select and then press the [ENTER] key.
zThe name of the input source you select appears in the upper right corner of the projection 
screen for a few seconds.
zThe message “No signal input.” will appear if no input signal can be selected.
NoteThe table below shows how the input source selection affects the projector’s MONITOR OUT 
terminal and speaker (or AUDIO OUT terminal)*1 output signals.
Selecting the Input Source
When this input source is 
selected:The video input signal from this 
terminal is output to the 
MONITOR OUT terminal:The audio input signal from this 
terminal is output to the speaker 
(or AUDIO OUT terminal):
Computer 1 COMPUTER IN 1*
2AUDIO IN 1
Computer 2 COMPUTER IN 2*
2AUDIO IN 2
S-video
*2 *3AUDIO IN L/R
Video
*2 *3AUDIO IN L/R
HDMI
*2 *3HDMI
USB
*2 *3USB
*1  Audio is output from either the speaker or AUDIO OUT terminal in accordance with the setup 
menu “Option Settings 2 
J Audio Output” setting.
*2  Output is proper only when the input signal is an RGB signal. Output is not guaranteed when 
the input signal is a component signal.
*3 The video input signal is output from either Computer 1 or Computer 2, in accordance with 
the last selected input source (COMPUTER IN 1 terminal or COMPUTER IN 2 terminal). For 
example, even if the input source is switched from Computer 1 to S-video, the MONITOR 
OUT terminal continues output the video input signal from COMPUTER IN 1.