Casio Projector XJ-M140 XJ-M145 User Manual
Have a look at the manual Casio Projector XJ-M140 XJ-M145 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 338 Casio manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 56
56
2.Look up the projector’s IP address.
zPerform the following steps to look up the projector’s current IP address.
3.On the computer, start up a Web browser.
4.In the Web browser address bar, input the projector’s IP address and then press
the [Enter] key.
zIf the projectors current IP address is 192.168.100.10, for example, you would input:
“http://192.168.100.10”.
zThis displays the top page of the projector’s System Admin page.
zFor information about what you should do next, see “To control the...](http://img.usermanuals.tech/thumb/16/98947/w64_projector_manual_6248_d-55.png "Page 56
56
2.Look up the projector’s IP address.
zPerform the following steps to look up the projector’s current IP address.
3.On the computer, start up a Web browser.
4.In the Web browser address bar, input the projector’s IP address and then press
the [Enter] key.
zIf the projectors current IP address is 192.168.100.10, for example, you would input:
“http://192.168.100.10”.
zThis displays the top page of the projector’s System Admin page.
zFor information about what you should do next, see “To control the...")
![Page 57
57
To control the projector using the Wireless Presentation System control
panel
1.Depending on the type of LAN connection you are using, perform either of the
following operations to display the top page of the projector’s System Admin
page.
2.Click “System Admin”. On the password input screen that appears, enter the
password.
zThe initial default password is “admin”.
3.Click the [Login] button.
zThis logs in to the System Admin page and displays the Status screen.
4.Click “Control panel” on the...](http://img.usermanuals.tech/thumb/16/98947/w64_projector_manual_6248_d-56.png "Page 57
57
To control the projector using the Wireless Presentation System control
panel
1.Depending on the type of LAN connection you are using, perform either of the
following operations to display the top page of the projector’s System Admin
page.
2.Click “System Admin”. On the password input screen that appears, enter the
password.
zThe initial default password is “admin”.
3.Click the [Login] button.
zThis logs in to the System Admin page and displays the Status screen.
4.Click “Control panel” on the...")
61 zSee the “Command List” for details about command names and settings. zAll commands use ASCII characters and decimal format integers. zThe projector will return a question mark (?) when it is sent a command it cannot recognize. Also, any command that attempts to set a value that is outside the applicable allowable range will be ignored. zIf the projector is performing a process initiated by a previously sent command, a projector key operation, or a remote controller key operation, send of the next command must wait until the projector completes the previous process. Command List zOnly the following functions are supported while the projector is turned off. Do not try to send any other command to the projector. zInput of a valid signal must be in progress in order to use a command to turn on blank screen or change the aspect ratio. R: Read enabled W: Write enabled zPower on/off: Read zPower on: Write zGet light time: Read FunctionCommand NameRWSetting Range Power On/Off:PWR RW 0: Off, 1: On Input Switching: 0:Switches the input source to the COMPUTER terminal and changes the COMPUTER terminal setting to RGB. 1:Switches the input source to COMPUTER terminal and changes the COMPUTER terminal setting to component. 2:Switches the input source to Video. 5:Switches the input source to USB. This setting is supported only when the projector is equipped with a USB function and the USB application is running. 6:Switches the input source to COMPUTER terminal and changes the COMPUTER terminal setting to Auto. 7:Switches the input source to HDMI. 9:Switches the input source to S-video.SRC RW 0: RGB, 1: Component, 2: Video, 5: USB, 6: Auto (RGB/Component), 7: HDMI, 9: S-video Blank Screen: Switches the blank screen on or off. BLK RW 0: Off, 1: On Volume:Specifies a value to adjust the volume level. This setting is applied to the input source signal that is currently being projected by the projector.VOL RW 0-30 Color Mode: Selects the color mode. PST RW 1: Graphics, 2: Theater, 3: Standard, 4: Blackboard, 5: Game Aspect Ratio: Specifies the aspect ratio. ARZ RW 0: Normal* 1, 1: 16:9, 2: Normal*2, 3: Letter Box, 4: Full, 5: True Get Light Time: Gets the light time from the projector. LMP R 0- Unit: Hours *1 Input source: RGB or HDMI (PC) *2 Input source: Video, S-video, component or HDMI (DTV)
62 *XJ-M145, XJ-M245, XJ-M155, XJ-M255 only zCASIO COMPUTER CO., LTD. makes no guarantees concerning the operation or suitability of any USB device that you connect to the projector’s USB port. zSpecifications are subject to change without notice. Specifications Model NameXJ-M140/XJ-M145XJ-M240/XJ-M245XJ-M150/XJ-M155XJ-M250/XJ-M255 Brightness (ANSI Lumens)2500 3000 Projection System DLP DLP chipSize: 0.55 inch, Number of Pixels: XGA (1024 × 768)Size: 0.65 inch, Number of Pixels: WXGA (1280 × 800)Size: 0.55 inch, Number of Pixels: XGA (1024 × 768)Size: 0.65 inch, Number of Pixels: WXGA (1280 × 800) Projection Lens 1.5X manual optical zoom, manual focus Light Source Laser and LED TerminalsCOMPUTER IN:RGB 15-pin mini D-Sub × 1 (Also used as component signal input terminal.) VIDEO: RCA pin jack × 1 S-video: 4-pin mini DIN × 1 HDMI: HDMI type A terminal × 1 AUDIO IN: 3.5 φ stereo mini jack × 1, RCA pin jack × 2 AUDIO OUT: 3.5 φ stereo mini jack × 1 SERIAL: 9-pin D-Sub × 1 USB *: TYPE A terminal × 1 LAN*: RJ-45 terminal × 1 Display LanguagesEnglish, French, German, Italian, Spanish, Swedish, Portuguese, Turkish, Russian, Chinese (Simplified), Chinese (Traditional), Korean, Japanese