Casio Projector XJ-H260 User Manual

41
Screen Settings Main Menu
Setting NameInputSetting UnitDescription
Keystone 
Correction
RCVHDUNSingle Use this sub-menu to perform vertical keystone correction of the 
projected image.
Aspect Ratio
RCVHDSource 
SpecificUse this sub-menu to select an aspect ratio setting for the projected 
image.
Input Source: RGB or HDMI (PC)
Normal*:
Projects at the projector’s maximum possible size while 
maintaining the input signal aspect ratio.
Full:
Projects at the projector’s maximum possible size by enlarging...

42
Projection 
ModeRCVHDUNSingle Use this sub-menu to specify whether projection will be from the 
front of the screen or the back of the screen.
Front*:
Select this option to project from the front of the screen.
Rear:
Select this option to project from the back of the screen. This 
setting flips the front projected image horizontally.
Ceiling Mount
RCVHDUNSingle Use this sub-menu to configure the projector for use in an 
installation in which it is positioned upside down.
On:
Flips the projected image...

43
Input Settings Main Menu
Restore Menu 
DefaultsRCVHDUNSource 
SpecificUse this sub-menu to return all of the sub-menu items on the Screen 
Settings main menu to their initial default settings.
zRestoring menu defaults when there is no input signal will restore 
defaults for the currently selected input source.
zNote that the “Keystone Correction”, “Projection Mode”, “Ceiling 
Mount”, “Startup Screen”, “No Signal Screen”, and “Blank 
Screen” settings are always returned to their initial defaults,...

44
Option Settings 1 Main Menu
Signal Name 
IndicatorRCVHDUNSingle Use this sub-menu to specify whether or not the name of the 
currently selected signal source should be displayed in the projected 
image.
On*:
Select this option to turn on display of the name of the currently 
selected signal source in the projected image.
Off:
Select this option to turn off display of the signal source name.
Restore Menu 
Defaults
RCVHDUNSource 
SpecificUse this sub-menu to return all of the sub-menu items on the Input...

45
Auto Power OffRCVHDUNSingle Auto Power Off lets you specify the amount of time of projector 
operation and input signal inactivity to be allowed before Auto Power 
Off is triggered to turn off projector power automatically. Auto Power 
Off can be disabled, if you want.
5 min, 10 min*, 15 min, 20 min, 30 min:
Time until Auto Power off is triggered.
Off:
Disables Auto Power Off.
Note(for USB port model users)
Auto Power Off is disabled whenever the projector is doing 
any one of the following.
–...

46
Option Settings 2 Main Menu
Setting NameInputSetting UnitDescription
Pointer
RCVHDUNSingle Use this sub-menu to specify the type of pointer that appears first 
when you press the [POINTER] key.
Plug and Play
(USB port 
models only)
RCVHDUNSingle Use this sub-menu to turn plug-and-play on or off.
On*:
Select this option to turn on plug-and-play. This will allow the 
projector detect when an external USB device is connected and 
make that device the input source automatically.
Off:
Select this option to...

47
Standby RGB/
AudioRCVHDUNSingle Use this sub-menu to configure the projector for output of the video 
signal from the COMPUTER IN 1 terminal to the MONITOR OUT 
terminal, and output of the audio signal from the AUDIO IN 1 terminal 
to the AUDIO OUT terminal while the projector is in standby 
(projector off with power being supplied).
Output:
Select this setting to output video and audio signals while the 
projector is in standby.
No Output*:
Select this setting not to output video and audio signals...

48
Wired LAN Settings Main Menu (USB Port Models Only)
USB Settings Main Menu (USB Port Models Only)
The USB Settings main menu is available only when there is an external device connected to the 
USB-A port of the projector. For details, see the “USB Function Guide” and “Wireless Function 
Guide”.
Setting NameInputSetting UnitDescription
Remote on
RCVHDUNSingle Specifies whether the projector can be turned on via wired LAN while 
the projector is in standby (projector off with power being supplied)....

49
Operational Info Main Menu
Restore All Defaults Main Menu
Setting NameInputSetting UnitDescription
Input Signal
RCVHDUNSource 
SpecificThis sub-menu item shows the currently selected input signal (RGB, 
Component, Video, S-video, HDMI(PC), or HDMI (DTV)). “- - - -” is 
indicated here when there is no input signal.
Signal Name
RCVHDUSource 
SpecificThis sub-menu item shows the signal name of the signal being input 
to the projector. For details about signal names, see “Signal Name” 
under “Supported...

50
Cleaning the Projector
Periodically clean the projector exterior, lens, intake vents, and intake-exhaust vents on a regular 
basis.
Important!Before cleaning the projector, be sure to unplug it from the power outlet and make sure it is 
cooled down completely.
Wipe the exterior of the projector with a soft cloth that has been moistened in a weak solution of water 
and a mild neutral detergent. Be sure to wring all excess moisture from the cloth before wiping.
Never use benzene, alcohol, thinner, or...