Casio Projector XJ-H1600 XJ-H1650 User Manual

21
Configuring Advanced Projector Settings
Your projector has a setup menu that you can use to configure advanced settings.
Displaying the Setup Menu
Pressing the [MENU] key displays the menu shown below in the center of the projection screen.
To exit the setup menu
Press the [MENU] key.
Configuring Setup Menu Settings
1.Press the [MENU] key to display the setup menu.
2.Use the [T] and [S] keys to select the main menu item you want by highlighting 
it.
3.Press the [ENTER] key.
4.Use the [T] and [S] keys...

22
Basic Setup Menu Example
The procedure below shows how to configure the following three settings:
zImage Adjustment 1 J Contrast
zImage Adjustment 1 J Color Mode
zInput Settings J Signal Name Indicator
NotezThe setup menu items that you can change depend on whether or not an image signal is being 
input to the projector, and on the currently selected input source. Perform the procedure 
below after starting projection of an image from an input source in the normal input mode. See 
“3D Input Mode” on...

23
To configure the “Image Adjustment 1 J Color Mode” setting
5.Use the [T] key to select “Color Mode”.
6.Press the [ENTER] key.
zThis displays the color mode menu.
7.Use the [T] and [S] keys to select the color mode you want, and then press the 
[ENTER] key.
8.After selecting the color mode you want, press the [ESC] key.
To configure the “Input Settings J Signal Name Indicator” setting
9.Press the [ESC] key.
10.Use the [T] key to select “Input Settings”.
11.Press the [ENTER] key.
12.Use the [T] key to...

24
The password feature lets you keep unauthorized individuals from using the projector. You can specify 
whether password input is required whenever you turn on the projector, and you can specify and 
change the password as required. Use the setup menu “Option Settings 1J Power On Password” 
setting to configure power on password settings.
Inputting a Password
The password of your projector is not really a “word” made up of letters, but rather a sequence of 
remote controller key inputs. The following...

25
Keep a written record of your password!
You will not be able to use the projector if you forget its password. We strongly suggest that you keep 
a written or other type of record of the password so you can look it up when necessary.
To change the password
1.Press the [MENU] key to display the setup menu.
2.Use the [T] key to select “Option Settings 1”, and then press the [ENTER] key.
3.Use the [T] key to select “Power On Password”, and then press the [ENTER] 
key.
zThis will display a dialog box...

26
To turn password protection on and off
1.Display the Power On Password setting screen by performing steps 1 through 5 
of the procedure under “To change the password” on page 25.
zAt this time, make sure that “Power On Password” is selected on the Power On Password 
setting screen.
2.Use the [W] and [X] keys to select “On” or “Off”.
zChanging the power on password setting from “Off” to “On” causes the confirmation dialog 
box shown below to appear.
Press the [ENTER] key to confirm that you want to...

27
You can use the procedures in this section to restore all of the settings on a particular main menu or all 
of the settings on the setup menu to their initial factory defaults.
To restore all settings on a particular main menu to their initial factory 
defaults
1.Press the [MENU] key to display the setup menu.
2.Use the [T] and [S] keys to select the main menu whose settings you want to 
restore to their initial factory defaults.
zYou can select Image Adjustment 1, Image Adjustment 2, Volume...

28
To restore all settings on the setup menu to their initial factory defaults
1.Press the [MENU] key to display the setup menu.
2.Use the [T] key to select “Restore All Defaults” and then press the [ENTER] key.
3.After confirming that “Restore All Defaults” sub-menu is selected, press the 
[ENTER] key.
zThis displays a confirmation message asking if you want to initialize all settings.
4.Use the [S] key to select “Yes”.
5.To restore all settings on the setup menu to their initial defaults, press the...

29
This section contains tables that provide detailed explanations of all of the items included on the setup 
menu. The following describes the type of information that appears in each of the columns of the 
tables.
Image Adjustment 1 Main Menu
Setup Menu Contents
Setting Name: This column shows the names of the settings as they appear on the sub-menu.
Input: This column shows the input source for which each setting is supported.
Input source names are abbreviated as follows:
R : RGB input
C  : Component...

30
Color ModeRCVHDUSource 
SpecificYou can select from among various different color mode settings in 
accordance with image contents and projection conditions.
Standard:
Use this setting when you want to highlight the colors of your 
presentation.
Graphics:
Use this setting when you want photographs and graphics to 
appear natural.
Theater:
Use this setting to bring out the dark portions of your images.
Blackboard:
Use this setting for easy viewing when projecting onto a 
blackboard.
Game:
Use this...