Casio Projector XJ-A257 User Manual
Here you can view all the pages of manual Casio Projector XJ-A257 User Manual. The Casio manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
41 To specify the screen resolution of the ECA file or PtG file 1.Right-click the left side of the EZ-Converter FA window. 2.On the menu that appears, click “Output Resolution”. 3.On the sub-menu that appears, select the resolution you want. zSelect 1280 × 800 or 1280 × 768. If you cannot select the 1280 × 800 or 1280 × 768 resolution, select 1024 × 768. zFor a PtG file, select 1024 × 768 or 800 × 600. zThe setting you select here remains in effect until you change it. To specify the maximum animation...
Page 42
![Page 42
42
4.Select the ECA file or PtG file you want to play back and then click the [Open]
button.
zThis will display a control panel at the top of the screen.
zDuring file playback, you can use the control panel buttons to perform the operations
described below.
To do this:Perform this operation:
Go to the previous page Click the button.
Go to the next page Click the button.
Jump to a specific page 1. Click the button and then click “Slide Viewer” on the menu that appears.
2. On the page menu that...](http://img.usermanuals.tech/thumb/16/99667/w300_projector_manual_8245_d-41.png "Page 42
42
4.Select the ECA file or PtG file you want to play back and then click the [Open]
button.
zThis will display a control panel at the top of the screen.
zDuring file playback, you can use the control panel buttons to perform the operations
described below.
To do this:Perform this operation:
Go to the previous page Click the button.
Go to the next page Click the button.
Jump to a specific page 1. Click the button and then click “Slide Viewer” on the menu that appears.
2. On the page menu that...")
42 4.Select the ECA file or PtG file you want to play back and then click the [Open] button. zThis will display a control panel at the top of the screen. zDuring file playback, you can use the control panel buttons to perform the operations described below. To do this:Perform this operation: Go to the previous page Click the button. Go to the next page Click the button. Jump to a specific page 1. Click the button and then click “Slide Viewer” on the menu that appears. 2. On the page menu that...
Page 43
43 USB Display Function Overview Connecting the projector to a computer with a USB cable* enables projection of the computer’s screen contents. This supports projection of screen contents of even small computers that have only a USB port, but no RGB, HDMI, or other type of video output terminal. *To use the USB Display function, connect the computer to the projector’s USB-B port. Minimum Computer System Requirements zSupported Operating Systems Windows XP SP3, Windows Vista SP1 (32bit), Windows 7 SP1...
Page 44
![Page 44
44
To project Windows computer screen contents over a USB
connection for the first time
1.Press the [INPUT] key. This will display the “Input” dialog box.
2.Use the [T] and [S] keys to select “USB Display” and then press the [ENTER]
key.
zThis will cause the USB Display standby screen to be projected.
3.While your computer is running, use a commercially available USB cable to
connect the projector’s USB-B port (Micro USB B type) to your computer’s USB
port.
zThe location of the USB-B port of this...](http://img.usermanuals.tech/thumb/16/99667/w300_projector_manual_8245_d-43.png "Page 44
44
To project Windows computer screen contents over a USB
connection for the first time
1.Press the [INPUT] key. This will display the “Input” dialog box.
2.Use the [T] and [S] keys to select “USB Display” and then press the [ENTER]
key.
zThis will cause the USB Display standby screen to be projected.
3.While your computer is running, use a commercially available USB cable to
connect the projector’s USB-B port (Micro USB B type) to your computer’s USB
port.
zThe location of the USB-B port of this...")
44 To project Windows computer screen contents over a USB connection for the first time 1.Press the [INPUT] key. This will display the “Input” dialog box. 2.Use the [T] and [S] keys to select “USB Display” and then press the [ENTER] key. zThis will cause the USB Display standby screen to be projected. 3.While your computer is running, use a commercially available USB cable to connect the projector’s USB-B port (Micro USB B type) to your computer’s USB port. zThe location of the USB-B port of this...
Page 45
![Page 45
45
To project Mac OS computer screen contents over a USB
connection for the first time
1.Press the [INPUT] key. This will display the “Input” dialog box.
2.Use the [T] and [S] keys to select “USB Display” and then press the [ENTER]
key.
zThis will cause the USB Display standby screen to be projected.
3.While your computer is running, use a commercially available USB cable to
connect the projector’s USB-B port to your computer’s USB port.
zThe location of the USB-B port of this projector is indicated...](http://img.usermanuals.tech/thumb/16/99667/w300_projector_manual_8245_d-44.png "Page 45
45
To project Mac OS computer screen contents over a USB
connection for the first time
1.Press the [INPUT] key. This will display the “Input” dialog box.
2.Use the [T] and [S] keys to select “USB Display” and then press the [ENTER]
key.
zThis will cause the USB Display standby screen to be projected.
3.While your computer is running, use a commercially available USB cable to
connect the projector’s USB-B port to your computer’s USB port.
zThe location of the USB-B port of this projector is indicated...")
45 To project Mac OS computer screen contents over a USB connection for the first time 1.Press the [INPUT] key. This will display the “Input” dialog box. 2.Use the [T] and [S] keys to select “USB Display” and then press the [ENTER] key. zThis will cause the USB Display standby screen to be projected. 3.While your computer is running, use a commercially available USB cable to connect the projector’s USB-B port to your computer’s USB port. zThe location of the USB-B port of this projector is indicated...
Page 46
46 Supported Operations during Projection over a USB connection The operations described in the table below are supported on the CASIO USB Display window during projection. To do this:Perform this operation: Start (resume) computer screen projection Click . Freeze computer screen projection Click . Stop computer screen projection and project the USB display standby screenClick . Start audio output from a computer* 1*3Click . On the menu that appears, select “Audio Out” so there is a check mark next...
Page 47
![Page 47
47
To project computer screen contents over a USB connection
after the first time
1.Turn on and start up the projector and computer.
2.Press the [INPUT] key. This will display the “Input” dialog box.
3.Use the [T] and [ S] keys to select “USB Display” and then press the [ENTER]
key.
z This will cause the USB Display standby screen to be projected.
4.Use a USB cable to connect the projector’s USB-B port to your computer’s USB
port.
z The CASIO USB Display will startup automatically on the...](http://img.usermanuals.tech/thumb/16/99667/w300_projector_manual_8245_d-46.png "Page 47
47
To project computer screen contents over a USB connection
after the first time
1.Turn on and start up the projector and computer.
2.Press the [INPUT] key. This will display the “Input” dialog box.
3.Use the [T] and [ S] keys to select “USB Display” and then press the [ENTER]
key.
z This will cause the USB Display standby screen to be projected.
4.Use a USB cable to connect the projector’s USB-B port to your computer’s USB
port.
z The CASIO USB Display will startup automatically on the...")
47 To project computer screen contents over a USB connection after the first time 1.Turn on and start up the projector and computer. 2.Press the [INPUT] key. This will display the “Input” dialog box. 3.Use the [T] and [ S] keys to select “USB Display” and then press the [ENTER] key. z This will cause the USB Display standby screen to be projected. 4.Use a USB cable to connect the projector’s USB-B port to your computer’s USB port. z The CASIO USB Display will startup automatically on the...
Page 48
48 You can connect a CASIO graphing calculator to the Data Projector using a USB cable and project the calculator’s screen image with the Data Projector. USB connection of the following CASIO graphing calculators is supported. zClassPad II (fx-CP400) zClassPad 330 PLUS zfx-CG series zfx-9860G series zfx-9860GII series zfx-9750GII zGRAPH 95/85/85 SD/75/75+/35+ To project the screen image of a graphing calculator 1.While the projector is turned on, connect the USB cable that comes with the graphing...
Page 49
![Page 49
49
Operating the Projector
This section explains how to use the remote controller to perform projector operations.
To use manual keystone correction (KEYSTONE)
The projector has a keystone correction feature that prevents
distortion of the projected image when projecting from an
angle. The projector detects when it is at a vertical angle to the
screen and performs keystone correction automatically.
You can use the [KEYSTONE +] and [KEYSTONE –] keys to
adjust keystone correction manually.
To zoom an...](http://img.usermanuals.tech/thumb/16/99667/w300_projector_manual_8245_d-48.png "Page 49
49
Operating the Projector
This section explains how to use the remote controller to perform projector operations.
To use manual keystone correction (KEYSTONE)
The projector has a keystone correction feature that prevents
distortion of the projected image when projecting from an
angle. The projector detects when it is at a vertical angle to the
screen and performs keystone correction automatically.
You can use the [KEYSTONE +] and [KEYSTONE –] keys to
adjust keystone correction manually.
To zoom an...")
49 Operating the Projector This section explains how to use the remote controller to perform projector operations. To use manual keystone correction (KEYSTONE) The projector has a keystone correction feature that prevents distortion of the projected image when projecting from an angle. The projector detects when it is at a vertical angle to the screen and performs keystone correction automatically. You can use the [KEYSTONE +] and [KEYSTONE –] keys to adjust keystone correction manually. To zoom an...
Page 50
![Page 50
50
To mute the audio (VOLUME)
1.Press the [VOLUME +] or [VOLUME –] key to display the “Volume” screen.
2.Press the [ENTER] key.
zThis stops output from the speaker.
3.To restore the audio, press the [VOLUME +] or [VOLUME –] key.
To momentarily blank the image and mute the audio (BLANK)
1.Press the [BLANK] key.
zThis blanks the screen by displaying the blank screen image specified by the Setup Menu
“Blank Screen” setting (page 59) and mutes the audio.
2.To resume normal image and sound, press the [BLANK]...](http://img.usermanuals.tech/thumb/16/99667/w300_projector_manual_8245_d-49.png "Page 50
50
To mute the audio (VOLUME)
1.Press the [VOLUME +] or [VOLUME –] key to display the “Volume” screen.
2.Press the [ENTER] key.
zThis stops output from the speaker.
3.To restore the audio, press the [VOLUME +] or [VOLUME –] key.
To momentarily blank the image and mute the audio (BLANK)
1.Press the [BLANK] key.
zThis blanks the screen by displaying the blank screen image specified by the Setup Menu
“Blank Screen” setting (page 59) and mutes the audio.
2.To resume normal image and sound, press the [BLANK]...")
50 To mute the audio (VOLUME) 1.Press the [VOLUME +] or [VOLUME –] key to display the “Volume” screen. 2.Press the [ENTER] key. zThis stops output from the speaker. 3.To restore the audio, press the [VOLUME +] or [VOLUME –] key. To momentarily blank the image and mute the audio (BLANK) 1.Press the [BLANK] key. zThis blanks the screen by displaying the blank screen image specified by the Setup Menu “Blank Screen” setting (page 59) and mutes the audio. 2.To resume normal image and sound, press the [BLANK]...