Casio Projector XJ-A247 User Manual

31
File Menu Operations
There are two different views for the File Viewer file menu: a list view and an icon view.
List View
This view shows a list of names of folders and files in the projector internal memory, or on memory 
device connected to the projector’s USB port. Folders and files are displayed in this format 
immediately after you go from the File Viewer main screen to the Presentation Mode, PDF Viewer 
Mode, Slide Mode, or Movie Mode.
Icon View
This view shows both icons and names for the...

32
Configuring File Viewer Settings
This section explains how to configure File Viewer settings, including those that control what appears 
on the File Viewer file menu.
To configure File Viewer settings
1.On the File Viewer main screen, select “Viewer Settings” and then press the 
[ENTER] key.
zThis displays the “Viewer Setup” screen.
2.Use [T] and [S] to select the item whose setting you want to change.
3.Use [W] and [X] to change the currently selected setting.
zFor information about the settings...

33
File Viewer Setting Items
The initial default setting for each item is indicated by an asterisk (*).
Setting NameDescription
Display Sequence 
SetupSpecifies the sequence of images in the file menu.
File Names (Ascending)*:
Displays files in file name ascending order.
File Names (Descending):
Displays files in file name descending order.
File Name Extension (Ascending):
Displays file names in file name extension ascending alphabetical order. If multiple files 
have the same file name extension, they...

34
Autorun
Autorun lets you configure the projector for automatic projection of image files or a movie file located 
in a special folder named AUTORUNC. When auto projection is performed depends on where the 
AUTORUNC folder is located.
The settings shown below need to be configured before using Autorun.
z“Multimedia Settings 3 Autorun” (page 61): Enabled
z“Option Settings 2 3 Plug and Play” (page 60): On (Only when performing Autorun from a USB 
flash drive)
NotezAutorun projection of the still images...

35
To auto project images files or a movie file from projector 
internal memory
1.Perform steps 1 through 8 under “To copy files from a computer to projector 
internal memory” (page 19).
2.Create a folder named “AUTORUNC” (all single-byte upper-case characters) in 
the root directory of the “InternalMem” drive (projector internal memory).
3.Insert all of the image files or movie file you want to project with Autorun into the 
folder you created in step 2.
zIf you want to auto project a movie file, place...

36
File Viewer Troubleshooting
ProblemCause and Required Action
File Viewer does not appear when I 
connect USB flash drive to the 
Data Projector’s USB-A port.zThe USB flash drive you are connecting may have a format that cannot be 
recognized by the Data Projector. Connect the USB flash drive to your 
computer to check if its file system is FAT or FAT32. If it isn’t, reformat the 
USB flash drive to FAT or FAT32. Note that doing so will delete all of the 
data currently in USB flash drive.
zIf “Off” is...

37
File Viewer Error Messages
ProblemCause and Required Action
Folder does not contain any image 
files.There is no displayable folder, or file in the folder you are trying to access with 
the File Viewer. Use your computer to check the contents of the folder. For 
details about file formats supported for Data Projector playback, see 
“Supported Playback Files” (page 18).
This ECA/PtG file cannot be played 
back.There may be an error in the ECA file or PtG file itself. Play back the ECA file 
or PtG file...

38
Using EZ-Converter FA to Convert PowerPoint Files to ECA or 
PtG Files
EZ-Converter FA is computer software for converting PowerPoint files to ECA files or PtG files, which 
can be played back using the projector’s File Viewer. EZ-Converter FA supports conversion of files 
created with Microsoft Office PowerPoint 2003, 2007 and 2010.
Important!zBefore trying to use EZ-Converter FA, be sure to go to the CASIO website 
(http://www.casio-intl.com/support/) and check the information there about minimum...

39
To convert a PowerPoint file to an ECA file or PtG file
Important!zBefore performing any of the operations here, you will need to have a file created using 
Microsoft Office PowerPoint 2003, 2007 or 2010 on hand.
zConversion of a PowerPoint file to an ECA file or PtG file requires playback of the original file 
from beginning to end. Note that the time required for conversion will roughly correspond to 
the time required for playback.
1.Turn on your computer and start up Windows.
2.Connect the USB...

40
7.Configure the settings as required on the dialog box.
zThe following describes the meanings and settings of each of the items that appear on the 
dialog box.
8.After configuring all the settings you want, click [OK].
zThis will start playback of the PowerPoint file and start converting it to an ECA file or PtG file.
zThe “Conversion complete.” message will appear when file conversion is complete.
zIf you have other PowerPoint files you want to convert, repeat steps 4 through 7.
zTo check the...