Home > Casio > Projector > Casio Projector XJ-A142 User Manual

Casio Projector XJ-A142 User Manual

Here you can view all the pages of manual Casio Projector XJ-A142 User Manual. The Casio manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 51

51
To change the aspect ratio of the projected image (ASPECT)
Press the [ASPECT] key to cycle through the aspect ratio settings for the projected image.
Available settings depend on your projector model as shown below.
XJ-A242/XJ-A247/XJ-A252/XJ-A257/XJ-M241/XJ-M246/XJ-M251/XJ-M256
Pressing the [ASPECT] key will cycle through settings in accordance with the current input source as 
shown below.
XJ-A142/XJ-A147/XJ-M141/XJ-M146/XJ-M151/XJ-M156
Pressing the [ASPECT] key will cycle through settings in...

Page 52

52
To adjust image brightness (FUNC)
1.Press the [FUNC] key. On the menu that appears, select “Brightness” and then 
press the [ENTER] key.
2.On the brightness adjustment screen that appears, use the [W] and [X] keys to 
adjust brightness.
3.To hide the window, press the [ESC] key.
To change the color mode (FUNC)
1.Press the [FUNC] key. On the menu that appears, select “Color Mode” and then 
press the [ENTER] key.
zThis displays the color mode selection window. The currently selected color mode is the...

Page 53

53
The following three Eco Mode settings are available to specify whether priority should be given to 
low-power, low-noise operation or to projection brightness.
Important!zWhile “On (Auto)” is selected as the Eco Mode setting, make sure that the brightness sensor 
on the top of the projector is not blocked by anything.
zThe local environment and setup conditions affect the brightness sensor, so operation when 
“On (Auto)” is selected for the Eco Mode depends on these factors.
To select the Eco Mode...

Page 54

54
The presentation timer shows a countdown from a preset time value. You can use it to keep track of 
how much time has elapsed during your presentation, and to limit a presentation to a preset amount of 
time. You can configure the presentation timer so it is displayed in the projected image.
To display the timer
When the timer is not displayed on the projected image, press the [TIMER] key once.
The timer will appear for about five seconds and then disappear automatically if the “Off” is selected 
for...

Page 55

55
To configure timer settings
1.Use the [TIMER] key to display the timer function menu.
2.Use the [T] and [S] keys to select the “Position”, “Continuous Display”, or “Start 
Time” setting and then change the settings as described in the table below.
3.To save your settings and close the timer function menu, press [ESC].
zTo start the timer immediately after changing its settings, use [T] and [S] to select “Start 
Timer” on the timer function menu and then press the [ENTER] key before pressing [ESC] in...

Page 56

56
To pause the timer countdown
1.Use the [TIMER] key to display the timer function menu.
2.Select “Pause Timer” and then press the [ENTER] key.
To resume a paused timer countdown
1.Use the [TIMER] key to display the timer function menu.
2.Select “Restart Timer” and then press the [ENTER] key.
To reset the timer to its start time
1.Use the [TIMER] key to display the timer function menu.
2.Select “Reset Timer” and then press the [ENTER] key.
zThis will reset the time to the “Start Time” setting. 

Page 57

57
Pressing the [MENU] key displays the Setup Menu shown below on the projection screen. You can 
use this menu to adjust projected image brightness, contrast, and other settings, and to change 
projector settings.
The guidance shows the key operations that can be performed for the currently selected (highlighted) 
menu item.
Basic Setup Menu Operations
Setup Menu Settings
zOne or more letters (such as RCV) after the menu item name indicates an item that is available only 
when one or more particular...

Page 58

58
Image Adjustment 1 3 
Saturation (V)Use this sub-menu to adjust the color saturation of the projected image. A larger 
value increases color saturation.
Image Adjustment 1 3 
Tint (V)Use this sub-menu to adjust the tint of the projected image. 
A larger value makes the overall image more bluish, while a smaller value makes the 
overall image more reddish. This setting is supported only when the signal is NTSC 
or NTSC4.43.
Image Adjustment 13 
Color ModeSelect one of the following projected image...

Page 59

59
Screen Settings3 
Projection ModeSpecify whether projection will be from the front of the screen or the back of the 
screen.
Front*: Select this option to project from the front of the screen.
Rear: Select this option to project from the back of the screen. This setting flips the 
front projected image horizontally.
Screen Settings 3 
Ceiling MountSet up the projector to be hung from a ceiling.
On: Select when the projector is hung from a ceiling. Since the bottom of the 
projector is upwards, the...

Page 60

60
Option Settings 13 
PasswordSee “Password Protection” (page 62).
Option Settings 13 
Direct Power OnEnable (On) and disable (Off*) projector auto power on as soon as the projector’s AC 
adapter is plugged into a power outlet.
Option Settings 13 
LanguageSpecify the display language.
English, French, German, Italian, Spanish, Swedish, Portuguese, Dutch, Norwegian, 
Polish, Finnish, Czech, Turkish, Russian, Chinese (Simplified), Chinese (Traditional), 
Korean, Japanese, Thai, Indonesian, Malay,...
Start reading Casio Projector XJ-A142 User Manual

Related Manuals for Casio Projector XJ-A142 User Manual

All Casio manuals