Casio Lk90tv Instruction Manual

							E-29
Step 3 – Play at normal speed.
1Select the tune you want to play.
2Press the RIGHT button or the LEFT button to
specify the part you want to practice.
•If you want to practice both hands, press both buttons
at the same time.
3Press the STEP 3 button to start Step 3 play.
•Accompaniment (left hand part) starts to play at
normal speed.
•Voice fingering guide will use a simulated human
voice to call out fingering numbers during one-hand
part practice. See “Voice Fingering Guide” on page
E-30 for details.
4Follow the key light system to press the correct
keyboard keys and play the notes.
5To stop play at any time, press the PLAY/STOP
button.
Evaluation 3: Find out how the
keyboard evaluates your Step 3 play.
1Press the SCORING 3 button.
•This causes the SCORING 3 indicator to appear on
the display.
•After the keyboard sounds a count, it enters the
Evaluation Mode.
*The remainder of this procedure is identical to that
for Evaluation 1.
Advanced 3-Step Lesson
010 - 04 1
Al ohaOe
Fingering
Indicator appears
Using the Phrase Practice Mode
Perform the following procedure to find out where you scored
the lowest in your performance, so you can find your weak
points and focus your practice on those phrases.
1After displaying your evaluation results, press the
PRACTICE PHRASE button.
•This displays the Phrase Practice Mode screen, which
shows the phrase (start measure number and end
measure number) where your evaluation mode was
the lowest. This is the “practice phrase”.
NOTE
•If there are multiple phrases that qualify as the lowest
score, the phrase closest to the beginning of the tune is
used for phrase practice.
•If there is no section that qualifies for phrase practice,
“
***-
***” is displayed in place of the start and end
measures.
•Phrase practice measures are cleared if you change to
another tune or another mode.
To play back the practice phrase
1While the Phrase Practice Mode screen is on the
display, press the PLAY/STOP button.
•This plays back the phrase starting from the start
measure number.
•Playback continually loops from the beginning of the
practice phrase to its end.
• To stop practice phrase playback, press the PLAY/
STOP button again.
NOTE
•With some tunes, it may take a few seconds for playback
to start after you press the PLAY/STOP button in the
above procedure.
649A-E-031B
LK90TV_e_21-30.p6504.8.18, 4:45 PM 29 
						

							E-30
Advanced 3-Step Lesson
To practice the practice phrase
1While the Phrase Practice Mode screen is on the
display, press the STEP 1, STEP 2, or STEP 3 button.
•This starts 3-Step Lesson playback of the practice
phrase in accordance with the STEP button you
pressed.
2Play along on the keyboard.
•Playback continually loops from the beginning of the
practice phrase to its end.
•To stop playback, press the PLAY/STOP button.
Voice Fingering Guide
Voice fingering guide uses a simulated human voice to call
out fingering numbers during Step 1 and Step 2 one-hand
part practice. If you need to press a key with your thumb, for
example, voice fingering guide says, “One!” In the case of a
chord to be played with your thumb, middle and little finger,
voice fingering guide says, “One, three, five!”
Voice Fingering Guide calls out fingerings only when you do
not press the proper key when you should.
Voice Fingering Guide
One : Thumb
Two : Forefinger
Three : Middle finger
Four : Ring finger
Five : Little finger
To turn voice fingering guide on or off
Press the SPEAK button to toggle voice fingering guide on
(voice fingering guide indicator displayed) and off (indicator
not displayed).
NOTE
•Note that Voice Fingering is disabled in the Evaluation
Mode. Pressing the SCORING 1 or SCORING 2 button
automatically turns off Voice Fingering.
•Exiting the Evaluation Mode automatically restores the
Voice Fingering setting that was in effect when you
entered the Evaluation Mode.
Flash
Tempo value
Using the Metronome
The metronome feature of this keyboard produces a bell
sound for the first beat of each measure, followed by click
sounds for each successive beat of the measure. It is the perfect
tool for practicing tunes without accompaniment (rhythm).
To start the metronome
1Press the METRONOME button to start sounding
the metronome.
•This causes “Beat” to appear on the display. Perform
step 2 within five seconds after “Beat” appears.
2Use the number buttons or [+] and [–] to change
the number of beats per measure.
•You can specify 0, or a value from 2 to 6 as the number
of beats per measure.
NOTE
•The bell (indicating the first beat of a measure) does not
sound while one beat per measure is specified. All beats
are indicated by a click sound. This setting lets you
practice with a steady beat, without worrying about how
many beats there are in each measure.
3Use the TEMPO buttons to set the tempo.
•Press  to increase the tempo (make if faster) or  to
decrease it (make it slower).
NOTE
•While the tempo value is flashing, you can also use the
number buttons or [+] and [–] to input a three-digit value.
Note that you must input leading zeros, so 90 is input
as 090.
•Pressing both the 
 and  TEMPO buttons at the same
time automatically returns the currently selected rhythm
or tune to its default tempo.
4To turn off the metronome, press the METRONOME
button.
Indicator
appears
649A-E-032B
Bea t
LK90TV_e_21-30.p6504.8.18, 4:45 PM 30 
						

							E-31
MIC VOLUME knob
Microphone
Microphone ON/OFF switch
Using a Microphone for Sing Along
You can select any of the 65 Song Bank/Sing Along Group
tunes or SMF data from a SmartMedia card, and sing along
with its accompaniment.
Using the microphone jack
Connecting a commercially available microphone* to the MIC
IN jack makes it possible to sing along with the keyboard’s
built-in tunes or with SMF playback. When connecting a
microphone, be sure to first adjust the MIC VOLUME to a
relatively low setting, and then adjust to the level you want
after connecting.
*If a microphone was included with your keyboard, use that
microphone. If your keyboard did not come with a
microphone, use a commercially available microphone that
satisfies the stipulated specifications.
1Set the MIC VOLUME knob setting so it is on the
“MIN” side.
2Turn on the microphone’s ON/OFF switch.
3Use the MIC VOLUME knob to adjust microphone
volume to the level you want.
IMPORTANT!
•Be sure to use the microphone’s ON/OFF switch to turn
off the microphone and to disconnect the microphone
from the keyboard whenever you are not using it.Recommended Microphone Type
•Dynamic microphone (standard plug)
Howling (Feedback Noise)
Any of the following conditions can cause howling (feedback
noise).
•Covering the head of the microphone with your hand
•Positioning the microphone too near to a speaker
Should howling occur, try grasping the microphone further
away from the head, and move away from any nearby
speaker.
Static Noise
Fluorescent lighting can cause static noise in the microphone
signal. When this happens, move away from the lighting you
suspect may be causing the static.
649A-E-033A
MIC IN
SONG BANKCARD
SING ALONG  
KEY CONTROL/TRANSPOSE
Number buttons

[+] / [–]MIC VOLUME
LK90TV_e_31-38.p6504.8.18, 4:45 PM 31 
						

							E-32
Using a Microphone for Sing Along
To use a microphone for sing along
PREPARATION
•Adjust the main volume (page E-18), accompaniment/
song volume (page E-49), and microphone volume (page
E-31).
1Find the tune you want in the Song Bank/Sing Along
List or on a Smart Media card, and note its number.
•See page A-9 for the Song Bank/Sing Along List.
2Press the SING ALONG button to enter the Sing
Along Mode.
•This causes the SING ALONG indicator to appear.
3Select the sing along source.
Song Bank
Press the SONG BANK button. This enters the Sing
Along Song Bank Mode, and displays the Song Bank
indicator.
•Each press of the SONG BANK button toggles the
SONG BANK indicator on and off.
SmartMedia card
Press the CARD button. This enters the Sing Along Card
Mode, and displays the CARD indicator.
•Each press of the CARD button toggles the CARD
indicator on and off.
4Use the number buttons to input the two-digit song
number.
Example: To select “ALOHA OE”, which is song number
58, input 5 and then 8.
NOTE
•The initial power on default tune setting is “00”.
•You can also specify the song number using the [+] and
[–] buttons.
5Press the  button to start tune play.
When the keyboard is connected to a TV
When you select a tune that includes lyric data, the lyrics
appear on the TV screen. In this case, the keyboard’s
screen continues to show the song title, without
changing.
•Now use the microphone to sing along with the
playback.
•The Sing Along Mode is similar to the Song Bank
Mode. The only difference is that the melody part in
the Sing Along Mode is played back at a lower
volume. Also a different tone setting is used in the
Sing Along mode to make sing along easier.
6Use the KEY CONTROL/TRANSPOSE buttons
( 
 /  ) to change the overall key of the playback,
if you want.
 : Raises the key by one semitone
 : Lowers the key by one semitone
7Press the  button to stop tune play.
•The same song plays in an endless loop until you stop
it.
NOTE
•To return a tune to its default key, press both of the KEY
CONTROL/TRANSPOSE buttons (
 and ) at thesame time.
Displaying Song Lyrics on a TV
Screen
When you select and start playback of a song that includes
lyric data while the keyboard is connected to a TV, a sing
along screen showing the song lyrics will appear on the TV.
•A microphone icon is displayed next to the song numbers
on the TV screen Song Bank/Sing Along List that include
lyric data.
•The lyrics that correspond to the accompaniment that is
currently playing change color on the screen.
•Lyrics that appear on the TV screen may not perfectly match
those of the original tune, so they can be matched to the
built-in tune.
NOTE
•The display limit is 25 characters per line on the screen
of a TV connected to the keyboard. Anything past the
25th character is not displayed.
Indicator appears
Indicator appears
649A-E-034B
LK90TV_e_31-38.p6504.8.18, 4:45 PM 32 
						

							E-33
Auto Accompaniment
Selecting a Rhythm
This keyboard provides you with 120 exciting rhythms that
you can select using the following procedure.
To select a rhythm
1Find the rhythm you want to use in the RHYTHM
List and note its rhythm number.
•Not all of the available rhythms are shown on the
rhythm list printed on the keyboard console. For a
complete list, see the “Rhythm List” on page A-8.
2Press the RHYTHM button.
3Use the number buttons to input the three digit
rhythm number for the rhythm you want to select.
Example: To select “075 RHUMBA”, input 0, 7 and then
5.
NOTE
•You can also increment the displayed rhythm number
by pressing [+] and decrement it by pressing [–].
•Some rhythms consist of chord accompaniments only,
without any drums or other percussion instruments. Such
rhythms do not sound unless CASIO CHORD,
FINGERED, or FULL RANGE CHORD is selected as
the accompaniment mode. This keyboard automatically plays bass and chord parts in
accordance with the chords you finger. The bass and chord
parts are played using sounds and tones that are
automatically selected to select the rhythm you are using.
All of this means that you get full, realistic accompaniments
for the melody notes you play with your right hand, creating
the mood of an one-person ensemble.
Rh umba
Pop1
Indicator appears
649A-E-035A
RHYTHM
Number buttons
MODESTART/STOPSYNCHRO/ENDINGINTRO
VARIATION/FILL-IN
NORMAL/FILL-IN
LK90TV_e_31-38.p6504.8.18, 4:45 PM 33 
						

							E-34
Melody keyboardAccompaniment
keyboard
NOTE
•The accompaniment keyboard can be used for playing
chords only. No sound will be produced if you try playing
single melody notes on the accompaniment keyboard.
Auto Accompaniment
Playing a Rhythm
Use the following procedure to start and stop rhythm play.
To play a rhythm
1Set the MODE switch to NORMAL.
2Press the START/STOP button to start play of the
currently selected rhythm.
3To stop rhythm play, press the START/STOP button
again.
NOTE
•All of the keyboard keys are melody keys while theMODE switch is set to NORMAL.
Using Auto Accompaniment
The following procedure describes how to use the keyboard’s
Auto Accompaniment feature. Before starting, you should
first select the rhythm you want to use and set the tempo of
the rhythm to the value you want.
To use Auto Accompaniment
1Set the MODE switch to CASIO CHORD,
FINGERED, or FULL RANGE CHORD.
2Press the START/STOP button to start play of the
currently selected rhythm.
3Play a chord.
•The actual procedure you should use to play a chord
depends on the current MODE switch position. Refer
to the following pages for details on chord play.
CASIO CHORD .......................... Page E-34
FINGERED ................................... Page E-35
FULL RANGE CHORD ............. Page E-36
4To stop Auto Accompaniment play, press the START/
STOP button again.
NOTE
•If you press the SYNCHRO/ENDING button and then
the INTRO button in place of the START/STOP button
in step 2, accompaniment will start with an intro pattern
when you perform the operation in step 3. For details
about these buttons, see pages E-37 and E-38.
•If you press the SYNCHRO/ENDING button in place of
the START/STOP button in step 4, an ending pattern
will play before accompaniment play is ended. For details
about this button, see page E-38.
•You can adjust the accompaniment part volume level
independently of the main volume. For details, see
“Adjusting Accompaniment and Song Bank Volume” on
page E-49.
CASIO CHORD
This method of chord play makes it possible for anyone to
easily play chords, regardless of previous musical knowledge
and experience. The following describes the CASIO CHORD
“Accompaniment keyboard” and “Melody keyboard”, and
tells you how to play CASIO CHORDs.
CASIO CHORD Accompaniment Keyboard and Melody
Keyboard
Rh umb a
Chord nameBasic Chord Form
649A-E-036B
LK90TV_e_31-38.p6504.8.18, 4:45 PM 34 
						

							E-35
Example
C Major (C)
C minor (Cm)
C seventh (C7)
C minor seventh (Cm7)
Chord Types
Major chords
Major chord names are marked
above the keys of the
accompaniment keyboard. Note that
the chord produced when you press
an accompaniment keyboard does
not change octave, regardless of
which key you use to play it.
Minor chords (m)
To play a minor chord, keep the
major chord key depressed and
press any other accompaniment
keyboard key located to the right of
the major chord key.
Seventh chords (7)
To play a seventh chord, keep the
major chord key depressed and
press any other two accompaniment
keyboard keys located to the right
of the major chord key.
Minor seventh chords (m7)
To play a minor seventh chord, keep
the major chord key depressed and
press any other three
accompaniment keyboard keys
located to the right of the major
chord key.
CDE F GABCDEF
CDE F GABCDEF
CDE F GAB C DEF
CDE F GABCDEF
NOTE
•It makes no difference whether you press black or white
keys to the right of a major chord key when playing minor
and seventh chords.
Auto Accompaniment
FINGERED
FINGERED provides you with a total of 15 different chord
types. The following describes the FINGERED
“Accompaniment keyboard” and “Melody keyboard”, and
tells you how to play a C-root chord using FINGERED.
FINGERED Accompaniment Keyboard and Melody
Keyboard
Melody keyboardAccompaniment
keyboard
NOTE
•The accompaniment keyboard can be used for playing
chords only. No sound will be produced if you try playing
single melody notes on the accompaniment keyboard.
C
Caug
 *1
Cm7 *2
C7
5 *1
Cmadd9 *2
Cm
Csus4
Cmaj7
 *2
C7sus4
CmM7
 *2
Cdim
C7
 *2
Cm7
5
Cadd9 *2
Cdim7 *1
See the FINGERED Chord Chart on page A-7 for details on
playing chords with other roots.
*1: Inverted fingerings cannot be used. The lowest note is
the root.
*2: The same chord can be played without pressing the 5th
G.
Chord Types
CASIO CHORD accompaniment lets you play four types of
chords with minimal fingering.
649A-E-037A
LK90TV_e_31-38.p6504.8.18, 4:45 PM 35 
						

							E-36
NOTE
•Except for the chords specified in note*1 above, inverted
fingerings (i.e. playing E-G-C or G-C-E instead of C-E-
G) will produce the same chords as the standard
fingering.
•Except for the exception specified in note*
2 above, all
of the keys that make up a chord must be pressed.
Failure to press even a single key will not play the desired
FINGERED chord.
FULL RANGE CHORD
This accompaniment method provides a total of 38 different
chord types: the 15 chord types available with FINGERED
plus 23 additional types. The keyboard interprets any input
of three or more keys that matches a FULL RANGE CHORD
pattern to be a chord. Any other input (that is not a FULL
RANGE CHORD pattern) is interpreted as melody play.
Because of this, there is no need for a separate accompaniment
keyboard, so the entire keyboard, from end to end, can be
used for both melody and chords.
FULL RANGE CHORD Accompaniment Keyboard and
Melody Keyboard
Accompaniment keyboard/Melody keyboard
< Chords Recognized by This Keyboard >
F
CG
C A

C B

C
Fm
CGm
CAm
CB
m
C
Dm7
5
CA
7CF7CFm7CGm7CA
add9C C
6  •  Cm6  •  C69
 
• • • • •
 • • • •
 • • • •
D
C C
CE
C
B
CCm
CDm
C
 • •
 • •
Chord Types
Corresponding
FINGERED Chord
Other ChordsNumber of Types
15 (page E-35)
23
The following are examples of chords
that use C as the bass note.
Auto Accompaniment
Example: To play the chord C major.
Any of the fingerings shown in the illustration below will
produce C major.
NOTE
•As with the FINGERED mode (page E-35), you can play
the notes that form a chord in any combination (1).
•When the composite notes of a chord are separated by
6 or more notes, the lowest sound becomes the bass
(2).
< Music Example >
Tone: 023, Rhythm: 005, Tempo: 070
EEG C
GC
2
1
1....Chord C
2....Chord CC
E

  4 4
 
   
 
 
 

 
  
	






DBmGA


4 4 
 
  
   
    
    
    

D
C#Bm
AE7A A
G

649A-E-038A
LK90TV_e_31-38.p6504.8.18, 4:45 PM 36 
						

							E-37
Using an Intro Pattern
This keyboard lets you insert a short intro into a rhythm
pattern to make startup smoother and more natural.
The following procedure describes how to use the Intro
feature. Before starting, you should first select the rhythm
you want to use, and set the tempo.
To insert an intro
1Press the INTRO button to start the selected rhythm
with an intro pattern.
•With the above setup, the intro pattern is played and
the auto accompaniment with intro pattern starts as
soon as you play chords on the accompaniment
keyboard.
NOTE
•The standard rhythm pattern starts to play after the intro
pattern is complete.
•Pressing the VARIATION/FILL-IN button while an intro
pattern is playing causes the variation pattern to sound
after the intro pattern is complete.
•Pressing the SYNCHRO/ENDING button while an intro
pattern is playing causes the ending pattern to sound
after the intro pattern is complete.
Auto Accompaniment
Using a Fill-in Pattern
Fill-in patterns let you momentarily change the rhythm
pattern to add some interesting variation to your
performances.
The following procedure describes how to use the Fill-in
feature.
To insert a fill-in
1Press the START/STOP button to start rhythm play.
2Press the NORMAL/FILL-IN button to insert a fill-
in pattern for the rhythm you are using.
NOTE
•The fill-in pattern does not play if you press the
NORMAL/FILL-IN button while an intro pattern is playing.
Using a Rhythm Variation
In addition to the standard rhythm pattern, you can also
switch to a secondary “variation” rhythm pattern for a bit of
variety.
To insert the variation rhythm pattern
1Press the START/STOP button to start rhythm play.
2Press the VARIATION/FILL-IN button to switch to
the variation pattern for the rhythm you are using.
NOTE
•To switch back to the standard rhythm pattern, pressthe NORMAL/FILL-IN button.
649A-E-039A
LK90TV_e_31-38.p6504.8.18, 4:45 PM 37 
						

							E-38
Using a Fill-in Pattern with a
Variation Rhythm
You can also insert a fill-in pattern while a variation rhythm
pattern is playing.
To insert a fill-in into a rhythm variation
1While a variation rhythm pattern is playing, press
the VARIATION/FILL-IN button to insert a fill-in
pattern for the variation rhythm you are using.
Synchro Starting Accompaniment
with Rhythm Play
You can set up the keyboard to start rhythm play at the same
time you play the accompaniment on the keyboard.
The following procedure describes how to use synchro start.
Before starting, you should first select the rhythm you want
to use, set the tempo, and use the MODE switch to select the
chord play method you want to use (NORMAL, CASIO
CHORD, FINGERED, FULL RANGE CHORD).
To use synchro start
1Press the SYNCHRO/ENDING button to put the
keyboard into synchro start standby.
2Playing a chord and the rhythm pattern starts to
play automatically.
NOTE
•If the MODE switch is set to NORMAL, only the rhythm
plays (without a chord) when you play on the
accompaniment keyboard.
•If you press the INTRO button before playing anything
on the keyboard, the rhythm starts automatically with
an intro pattern when you play something on the
accompaniment keyboard.
•Pressing the VARIATION/FILL-IN button before playing
anything on the keyboard causes play to start with the
variation pattern when something is played on the
keyboard.
•To cancel synchro start standby, press the SYNCHRO/
ENDING button one more time.
Auto Accompaniment
Flash
Finishing with an Ending Pattern
You can end your performances with an ending pattern that
brings the rhythm pattern you are using to a natural-sounding
conclusion.
The following procedure describes how to insert an ending
pattern. Note that the actual ending pattern played depends
on the rhythm pattern you are using.
To finish with an ending pattern
1While the rhythm is playing, press the SYNCHRO/
ENDING button.
•This causes the ending pattern to play, which brings
rhythm accompaniment to an end.
NOTE
•The timing when the ending pattern starts depends on
when you press the SYNCHRO/ENDING button. If you
press the button before the second beat of the current
measure, the ending pattern starts playing immediately.
Pressing the button at any point in the measure after
the second beat results in the ending pattern playing
from the beginning of the following measure.
649A-E-040A
LK90TV_e_31-38.p6504.8.18, 4:45 PM 38