Casio Lk90tv Instruction Manual

E-49
Tune
Tune
Keyboard Settings
Acom Vo lp
Acom Vo lp
Current accompaniment volume setting
Adjusting Accompaniment and
Song Bank Volume
You can adjust the volume of the accompaniment and Song
Bank tunes independently of the notes you play on the
keyboard. You can specify a volume level in the range of 000
(minimum) to 127 (maximum).
To adjust the accompaniment volume
1Press the FUNCTION button twice to display the
accompaniment volume adjustment screen.
2Use the number buttons or the [+]/[–] buttons to...

E-50
Connection to a Computer
Connecting to a Computer
The keyboard’s USB port makes it quick and simple to connect
to a computer. After installing the USB driver onto your
computer from the CD-ROM that comes with the keyboard,
you will be able to use commercially available MIDI software
on your computer to exchange data between the keyboard
and your computer.
Using the USB port
Note that you need to purchase a commercially available USB
cable to connect the keyboard to a computer using the USB
port....

E-51
Connection to a Computer
Changing the Settings
This section tells you how to make the settings required when
connecting to a computer.
KEYBOARD CHANNEL (Default: 1)
The keyboard channel is the channel used to send messages
from this keyboard to a computer. You can specify one channel
from 1 to 16 as the keyboard channel.
1Press the FUNCTION button until the KEYBOARD
CHANNEL screen appears.
2Use the [+], [–], and the number buttons to change
the channel number.
Example: To specify channel 4
NAVIGATE...

E-52
Connection to a Computer
ACCOMP OUT (Default: Off)
on:Auto Accompaniment is played by the keyboard and
the corresponding message is output from the USB port.
oFF:Auto Accompaniment messages are not output from the
USB port.
1Press the FUNCTION button until the ACCOMP
OUT screen appears.
Example: When ACCOMP OUT is off
2Use the [+] and [–] or [0] and [1] buttons to turn
the setting on and off.
Example: To turn ACCOMP OUT on
GM Mode Receive
When GM off is received and the mode switch is set to a...

E-53
Connection to a Computer
SUSTAIN/ASSIGNABLE JACK
(Default: SUS)
SUS(sustain):Specifies a sustain*1 effect when the pedal is
depressed.
SoS (sostenuto):Specifies a sostenuto*
2 effect when the
pedal is depressed.
SFt (soft):Specifies reduction of the sound’s volume when
the pedal is depressed.
rHy (rhythm):Specifies START/STOP button operation
when the pedal is depressed.
1Press the FUNCTION button until the SUSTAIN/
ASSIGNABLE JACK screen appears.
Example:When sustain is currently set
2Use the [+]...

E-54
Connection to a Computer
 indicates receive-only messages
EffectControl Number
BANK SELECT*10, 32
Modulation 1
Volume 7
Pan 10
Expression 11
Hold1 64
Sostenuto 66
Soft Pedal 67
RPN*2100 / 101
Data Entry 6 / 38
PROGRAM CHANGE
This is the tone selection message. PROGRAM CHANGE can
contain tone data within the range of 0 to 127.
A PROGRAM CHANGE message is sent out through this
keyboard’s USB port whenever you manually change its tone
number. Receipt of a PROGRAM CHANGE message from
an external...

E-55
Connection to a Computer
ALL SOUND OFF
This message forces all sound being produced over the
current channel to turn off, regardless of how the sound is
being produced.
ALL NOTES OFF
This message turns off all note data sent from an external
device and currently being  sounded on the channel.
•Any notes being sustained using a sustain pedal or
sostenuto pedal continue to sound until the next pedal off.
RESET ALL CONTROLLERS
This messages initializes pitch bend and all other control
changes.
SYSTEM...

E-56
Using a SmartMedia Card
Your keyboard is equipped with a card slot that supports use
of SmartMediaTM memory cards. This makes it possible for
the keyboard to directly read commercially available SMF
data, which has been saved to a SmartMedia card from your
computer, for sing along and lessons. SmartMedia data can
be used the same way as built-in tunes.
This keyboard supports SMF (FORMAT 0) data.
NOTE
•An SMF that is larger than about 80 Kbytes cannot be
used for a 3 Step Lesson or Evaluation Mode....

E-57
Inserting and Removing a
SmartMedia Card
The following describes how to insert a SmartMedia card into
the card slot and how to remove it.
To insert a SmartMedia card into the card slot
With the contact side of the SmartMedia card facing
downwards, insert the card into the card slot. Carefully push
the card into the slot as far as it will go.
NOTE
•When inserting a SmartMedia card into the card slot,
make sure you carefully orient the card correctly so it
slides correctly straight into the slot. Make...

E-58
Using a SmartMedia Card
Reading a SmartMedia card
1Press the CARD button.
2Use the number buttons to input the three-digit
number that corresponds to the SMF data you want
to select.
3Perform one of the following operations.
To play back SMF data
3-1Press the START/STOP button.
•The keyboard will read the SMF data and play it.
•Repeat operation is not supported while playing
SMF data.
To sing along with SMF data
3-1Press the PLAY/STOP button.
•The keyboard will read the SMF data and play it in
the...