Casio HIGH SPEED EXILIM EX FH25 User Manual

171Appendix
.Using Power in Other Countries
• The AC adaptor is designed for operation wi th any power supply in the range of 
100 V to 240 V AC, 50/60 Hz. Note, however, that the shape of the power cord plug 
depends on each country or geographic ar ea. Before taking the camera and AC 
adaptor along on a trip, check with travel agent about the power supply 
requirements in your destination(s).
• Do not connect the AC adaptor to a power supply through a voltage converter or 
similar device. Doing so...

172Appendix
.Using a Memory Card
• SD memory cards and SDHC memory cards have a 
write protect switch. Use the switch when you need to 
guard against accidentally deleting data. Note, 
however, if you write protect an SD memory card you 
must then turn write protection off whenever you want 
to record to it, format it, or delete any of its images.
• If a memory card starts to behave abnormally during  image playback, you can restore normal operation by 
reformatting it (page 157). However, it is...

173Appendix
Computer system requirements are different for each of the applications. Be sure to 
check the requirements for the particular appl ication you are trying to use. Note that 
the values provided here are minimum r equirements for running each application. 
Actual requirements are greater, depending  on the number of images and the sizes of 
the images being handled.
0 Windows
YouTube Uploader for CASIO
Adobe Reader 8
For details about the minimum system r equirements for each software...

174Appendix
The tables in this section show the initial default settings that are configured for menu 
items (displayed when you press [MENU]) after you reset the camera (page 157). 
Menu items depend on whether the camera is in the REC mode or PLAY mode. • A dash (–) indicates an item whose setting is not reset or an item for which there is  no reset setting.
. REC Mode
“REC” Tab
“Quality” Tab
Reset Initial Default Settings
Self-timer Off
AF Assist LightOn
Anti ShakeA Camera AS
Face Detection Off...

175Appendix
“Set Up” Tab
.PLAY Mode
“PLAY” Tab
“Set Up” Tab
• The contents of the “Set Up” tab are the same in the REC mode and PLAY mode.
Screen Auto 2
Eye-FiOn
Auto RotateOn
EVF 
Brightness0
SoundsStartup: Sound 1 / 
Half Shutter: 
Sound 1 / 
Shutter: Sound 1 / 
Operation: Sound 1 / 
=
Operation: 
...///// 
= Play: ...////
World Time Home
File No.Continue
TimestampOff
Adjust–
Date Style–
Language–
Sleep1 min
Auto Power Off5 min
REC/PLAYPower On
LCD PriorityOff
USBMass Storage
Video Out–
Battery Type–...

176Appendix
When things don’t go right...
Troubleshooting
ProblemPossible Cause and Recommended Action
Power Supply
Power does not 
turn on.1)The batteries may not be loaded correctly (page 16).
2)The batteries may be dead.
The camera 
suddenly powers 
down.1)Auto Power Off may have activated (page 153). Turn power 
back on.
2)The batteries may be dead.
3) The camera’s protection function may have activated 
because camera temperature is too high. Turn off the camera 
and wait until it cools down before...

177Appendix
The subject is out 
of focus in the 
recorded image.The image may not be focused properly. When composing the 
image, make sure the subject is located inside the focus frame.
The flash does not 
fire.
1)If 
?
 (Flash Off) is selected as the flash mode, change to 
another mode (page 46).
2)If battery power is low, replace the batteries with a full set of 
new ones.
3) If a BEST SHOT scene that uses  ?
 (Flash Off) is selected, 
change to a different flash mode (page 46) or select a 
different...

178Appendix
Though available 
lighting is bright, 
the faces of people 
in the image are 
dark.Not enough light is reaching the subjects. Change the flash 
mode setting to 
<
 (Flash On) for daylight synchro flash (page 
46), or adjust EV shift to the + side (page 44).
Night shots come 
out bad. Use the following BEST SHOT scenes (page 73) when shooting 
at night.
• High Speed Night Scene (for shooting night scenery only)
• High Speed Night Scene and Portrait (for shooting people  against night...

179Appendix
Other
The wrong date 
and time are 
displayed, or the 
wrong date and 
time are being 
stored along with 
image data.The date and time setting is off. Set the correct date and time 
(page 151).
The messages on 
the display are in 
the wrong 
language.
The wrong display language is selected. Change the display 
language setting (page 152).
Images cannot be 
transferred over a 
USB connection.
1) The USB cable may not be connected securely. Check all 
connections.
2) The wrong USB...

180Appendix
The lens-barrel unit 
is dirty or looks 
scratched.A lubricating agent is used to ensure that the lens operates 
smoothly. When the lens is extended, the lubricating agent can 
make it appear as if the lens-barrel unit is scratched. You can 
use a soft, dry cloth to wipe the lubricating agent off, if you want. 
When wiping off the lens-barrel unit, wipe gently taking care you 
do not twist the unit, or push it in, or pull it out. Note that the 
lubricating agent is not harmful to humans....