Casio Exilim Zoom Ex Z450 Users Guide

91Other Playback Functions (PLAY)
Other Playback Functions (PLAY)
This section explains menu items that you can use to configure settings and perform 
other playback operations.
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Slideshow
For information about menu operations, see page 61.
Playing a Slideshow on the Camera (Slideshow)
Start
Starts the slideshow
Images
Specifies the type of images to be included in the slideshow
All images: Snapshots, movies, and audio recordings
T Only: Snapshots and audio...

92Other Playback Functions (PLAY)
• To stop the slideshow, press [SET]. Pressing [MENU] instead of [SET] stops the 
slideshow and returns to the menu screen.
• Adjust audio volume by pressing [ 2] and then press [ 8] or [ 2] during playback.
• All button operations are disabled while  the slideshow is transitioning from one 
image to another.
• The time required for transition from one image to another may be longer in the  case of an image that was not recorded with this camera.
You can replace the...

93Other Playback Functions (PLAY)
1.Connect the camera to your computer (pages 120, 129).
If you plan to save the music files to the camera’s memory card, make sure the 
card is loaded in the camera.
2.Perform one of the following operations to open the memory card or 
built-in memory.
This will cause the camera to be recognized by your computer as a Removable 
Disk (Drive).
• Windows
1Windows Vista: Start * Computer
Windows XP: Start * My Computer
Windows 2000: Double-click “My Computer”.
2Double-click...

94Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Spnapshot Screen * [MENU] * PLAY Tab * 
Layout Print
You can use the following 
procedure to insert existing 
snapshots into the frames of a 
layout and produce a new image 
that contains multiple snapshots.
1.Use [4] and [6] to select 
the layout pattern you want 
and then press [SET].
2.Use [4] and [6] to select the background color and then press [SET].
3.Use [4] and [6] to select the images you want to include in the layout 
then press [SET]....

95Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Movie Screen to be Used * [MENU] * PLAY Tab * 
MOTION PRINT
1.Use [4] and [6] to scroll 
through the movie frames 
and display the one you 
want to use as the image 
of the MOTION PRINT 
image.
Holding down [4] or [6] 
scrolls at high speed.
2.Use [8] and [2] to select either “9 frames” or “1 frame” and then 
press [SET].
• When “9 frames” is selected, the frame you select in step 1 will be in the center 
of the MOTION PRINT image.
• Only the...

96Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Movie Screen of Movie to be Edited * [MENU] * 
PLAY Tab * Movie Editing
The Movie Editing feature lets you use one of the following procedures to edit out a 
specific part of a movie.
1.Use [8] and [2] to select the editing method you want to use and then 
press [SET].
2.Use [4] and [6] to scroll through the movie and 
search for the frame (point) from which or to 
which you want to cut the movie (the cut point).
• You also can search for the cut...

97Other Playback Functions (PLAY)
3.When the frame where you want the cut point to be is displayed, press 
[2].
4.Use [8] and [2] to select “Yes” and then press [SET].
The selected cut operation will take considerable time to complete. Don’t try to 
perform any camera operation until the “Busy... Please wait...” message 
disappears from the monitor screen. Note that a cut operation can take a long 
time if the movie being edited is long.
IMPORTANT!
• When you edit a movie, only the result is saved. The...

98Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Lighting
You can use this setting to optimize the balance between bright areas and dark areas 
in existing images.
NOTE
• Correcting the lighting when shooting produces better results (page 35).
• Altering the lighting of an image causes the original image and the new (altered) 
version to be stored as separate files.
• When you display an altered image on the camera’s monitor screen, the date and 
time...

99Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * 
White Balance
You can use the white balance setting to select a light source type for a recorded 
image, which will affect the colors of the image.
NOTE
• You also can adjust the white balance when recording images (page 80).
• The original snapshot is retained in memory and not deleted.
• When you display an altered image on the camera’s monitor screen, the date and 
time indicates when the image was...

100Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * 
Brightness
You can select one of five brightness levels, from +2 (brightest) to –2 (least bright).
NOTE
• The original snapshot is retained in memory and not deleted.
• When you display an altered image on the camera’s monitor screen, the date and 
time indicates when the image was originally recorded, not when the image was 
altered.
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Keystone
You...