Casio Exilim Zoom EX Z35 User Manual

							101Using the Camera with a Computer
IMPORTANT!
• Recorded images are transferred over wireless LAN. Do not use the Eye-Fi card or 
turn off Eye-Fi card communication (page 105) when on an aircraft or in any other 
location where use of wireless communication is limited or prohibited.
• Loading an Eye-Fi card will cause the Eye-Fi indicator   to 
appear on the monitor screen. Its transparent or not transparent 
appearance indicates the communication status as shown below.
• A communication icon   will appear on the monitor screen while image data 
transfer is in progress.
• The camera’s Auto Power Off (page 111) function is disabled while image data 
transfer is in progress.
• A confirmation message will appear on the monitor screen if you try to turn off the 
camera while image data transfer is in progress. Follow the instructions in the 
messages (page 135).
• Transfer of a large number of images can take some time to complete.
• The original images remain on the Eye-Fi card after the image data transfer.
• Recording a movie to an Eye-Fi card may result in movie frames being dropped.
• Proper Eye-Fi card data communication may not be possible due to camera 
settings, battery level, or operating conditions.
TransparentAccess point cannot be found or no transferable 
image data exists.
Not transparentImage transfer in progress
Downloaded From camera-usermanual.com Casio Manuals 
						

							102Using the Camera with a Computer
The camera creates a file and saves it each time you shoot a snapshot, record a 
movie, or perform any other operation that stores data. Files are grouped by storing 
them in folders. Each file and folder has its own unique name.
• For details about how folders are organized in memory, see “Memory Folder 
Structure” (page 103).
• You can view folder and file names on your computer. For details about how file 
names are displayed on the camera’s monitor screen, see page 12.
• The total number of folders and files allowed depends on the image size and 
quality, and capacity of the memory card being used for storage.
Files and Folders
Name and Maximum Number AllowedExample
File
Each folder can contain up to 9999 files named 
CIMG0001 through CIMG9999. The extension 
on the file name depends on the file type.26th file name:
Folders
Folders are named from 100CASIO to 
999CASIO.
There can be up to 900 folders in memory.
• The BEST SHOT (page 49) includes a 
sample scene that optimizes settings for 
auction site images. Depending on your 
camera model, the sample scene is named 
either “For eBay” or “Auction”.
– Images recorded with the eBay scene are 
stored in a folder named “100_EBAY”.
– Images recorded with the Auction scene 
are stored in a folder named “100_AUCT”.
• BEST SHOT also has a scene named “For 
YouTube” that optimizes movie settings for 
recording movies for upload to YouTube. 
Images recorded with the YouTube scene 
are stored in a folder named “100YOUTB”.100th folder name:
CIMG0026.JPG
Extension
Serial number (4 digits)
100CASIO
Serial number (3 digits)
Downloaded From camera-usermanual.com Casio Manuals 
						

							103Using the Camera with a Computer
The camera stores images you shoot in accordance with the Design Rule for Camera 
File System (DCF).
.About DCF
DCF is a standard that makes it possible to view and print images recorded on one 
manufacturer’s camera on DCF-compliant devices produced by other manufacturers. 
You can transfer DCF-compliant images recorded with another camera to this 
camera and view them on this camera’s monitor screen.
.Memory Folder Structure
DCIM Folder
Recording Folder
Image File
Movie File
Audio File
Audio Snapshot Image File
Audio Snapshot Audio File
Recording Folder
Recording Folder
DPOF File Folder
DPOF File
*Other folders are created when the following BEST SHOT scenes are used for 
recording: “For eBay” or “Auction” (scene name depends on camera model), or “For 
YouTube”. The following shows the name of the folder created for each scene.
•eBay scene: 100_EBAY•Auction scene: 100_AUCT•YouTube scene: 100YOUTB
Memory Card Data
DCIM
100CASIO *
CIMG0001.JPG
CIMG0002.AVI
CIMG0003.WAV
CIMG0004.JPG
CIMG0004.WAV
101CASIO *
102CASIO *
MISC
AUTPRINT.MRK
Downloaded From camera-usermanual.com Casio Manuals 
						

							104Using the Camera with a Computer
.Supported Image Files
• Image files shot with this camera
• DCF-compliant image files
This camera may not be able to display an image, even if it is DCF-compliant. When 
displaying an image recorded on another camera, it may take a long time for the 
image to appear on this camera’s monitor screen.
.Built-in Memory and Memory Card Data Handling Precautions
• Whenever copying memory contents to your computer, you should copy the DCIM 
folder and all of its contents. A good way to keep track of multiple DCIM copies of 
the DCIM folders it to change its name to a date or something similar after you copy 
it to your computer. If you later decided to return the folder to the camera, however, 
be sure to change its name back to DCIM. The camera is designed to recognize 
only a root file with the name DCIM. Note the camera also will not be able to 
recognize the folders inside the DCIM folder unless they have the names they 
originally had when you copied them from the camera to your computer.
• Folders and files must be stored in accordance with the “Memory Folder Structure” 
shown on page 103 in order for the camera to be able to recognize them correctly.
• You also can use a PC card adapter or a memory card reader/writer to access 
camera files directly from the camera’s memory card.
Downloaded From camera-usermanual.com Casio Manuals 
						

							105Other Settings (Set Up)
Other Settings (Set Up)
This section explains menu items that you can use to configure settings and perform 
other operations in both the REC mode and PLAY mode.
Procedure
[MENU] * Set Up Tab * R Panel
The REC mode screen layout settings let you select the layout of icons.
• All screen shots in this manual show what appears when the Control Panel is 
turned off.
Procedure
[MENU] * Set Up Tab * Eye-Fi
Select “Off” to disable Eye-Fi card communication (page 100).
For information about menu operations, see page 52.
Selecting a REC Mode Screen Layout (R Panel)
OffTurns off Control Panel display. This setting helps to 
view more of the image when the 16:9 aspect ratio 
is selected. Certain camera settings are indicated by 
icons on the image.
• Pressing [SET] while in the REC mode will cause 
the Control Panel to appear along the right side of 
the monitor screen. The Control Panel will 
disappear after you select an item and press [SET]. 
OnDisplays the Control Panel. All camera setting icons 
are cleared from the displayed image while the 
Control Panel is displayed.
Turning off Eye-Fi Card Communication (Eye-Fi)
Downloaded From camera-usermanual.com Casio Manuals 
						

							106Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Sounds
• Setting a volume level of 0 mutes output.
Procedure
[MENU] * Set Up Tab * Startup
Display the image you want to use as your startup image and then select “On”.
• The startup image does not appear when you turn on the camera by pressing [p] 
(PLAY).
• You can specify a snapshot you recorded as the startup image, or you can use the 
special startup image provided in the camera’s built-in memory.
• If you select an audio snapshot as the startup image, the audio will not play at 
startup.
• Formatting built-in memory (page 113) will delete the current startup image setting.
Configuring Camera Sound Settings (Sounds)
Startup
Specifies the startup sound.
Sound 1 - 5: Built-in sounds (1 through 5)
Off: Sound off
Half Shutter
Shutter
Operation
 OperationSpecifies the sound volume. This setting is also used as the 
audio level during video output (page 70).
 PlaySpecifies the volume of movie and Audio Snapshot audio 
output. This volume setting is not used during video output 
(from the USB/AV port).
Configuring a Startup Image (Startup)
=
=
Downloaded From camera-usermanual.com Casio Manuals 
						

							107Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * File No.
Use the following procedure to specify the rule that governs generation of the serial 
number used in file names (page 102).
Procedure
[MENU] * Set Up Tab * World Time
You can use the World Time screen to view the current time in a zone that is different 
from your Home City when you go on a trip, etc. World Time displays the current time 
in 162 cities in 32 time zones around the globe.
1.Use [8] and [2] to select “World” and then press [6].
• To change the geographic area and city for the time where you normally use 
the camera, select “Home”.
Specifying the File Name Serial Number Generation Rule 
(File No.)
ContinueTells the camera to remember the last used file number. A new file will 
be named using the next sequential number, even if files are deleted or 
if a blank memory card is loaded. If a memory card is loaded and that 
card already has files stored on it and the largest sequential number in 
the existing file names is greater than the largest sequential number 
remembered by the camera, numbering of new files will start from the 
largest sequential number in the existing file names plus 1.
ResetRestarts the serial number from 0001 whenever all files are deleted or 
when the memory card is replaced with a blank one. If a memory card 
is loaded and that card already has files stored on it, numbering of new 
files will start from the largest sequential number in the existing file 
names number plus 1.
Configuring World Time Settings (World Time)
Downloaded From camera-usermanual.com Casio Manuals 
						

							108Other Settings (Set Up)
2.Use [8] and [2] to select “City” and then press [6].
• To change the “World” setting to summer time, use [8] and [2] to select 
“DST” and then select “On”. Summer time is used in some geographical areas 
to advance the current time setting by one hour during the summer months.
3.Use [8], [2], [4], and [6] to select the geographic area you want and 
then press [SET].
4.Use [8] and [2] to select the city you want and then press [SET].
5.Press [SET].
IMPORTANT!
• Before configuring World Time settings, make sure that the Home City setting is 
the place where you live or normally use the camera. If it isn’t, select “Home” on the 
screen in step 1 and configure the Home City, date, and time settings as required 
(page 109).
Procedure
[MENU] * Set Up Tab * Timestamp
You can configure the camera to stamp the recording date only, or date and time in 
the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or 
deleted.
Example: July, 10, 2012, 1:25 p.m.
• Even if you do not stamp the date and/or time with Timestamp, you can do so later 
using the DPOF function or some printing application (page 84).
• Digital zoom is disabled while date stamping is turned on.
Time Stamping Snapshots (Timestamp)
Date2012/7/10
Date&Time2012/7/10 1:25pm
OffNo stamping of date and/or time
Downloaded From camera-usermanual.com Casio Manuals 
						

							109Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Adjust
When the date and time settings are what you want, press [SET] to apply them.
• You can specify a date from 2001 to 2049.
• Be sure to select your Home City (page 107) before setting the time and date. If 
you set the time and date while the wrong city is selected for your Home City, the 
times and dates of all of the World Time cities (page 107) will be wrong.
Procedure
[MENU] * Set Up Tab * Date Style
You can select from among three different styles for the date.
Example: July, 10, 2012
• This setting also affects the Control Panel date format as shown below (page 29).
YY/MM/DD or MM/DD/YY: MM/DD
DD/MM/YY: DD/MM
Setting the Camera’s Clock (Adjust)
[8] [2]Change the setting at the cursor location
[4] [6]Move the cursor between settings
[BS]Toggles between 12-hour and 24-hour format
Specifying the Date Style (Date Style)
YY/MM/DD12/7/10
DD/MM/YY10/7/12
MM/DD/YY7/10/12
Downloaded From camera-usermanual.com Casio Manuals 
						

							110Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Language
.Specify the display language you want.
1Select the tab on the right.
2Select “Language”.
3Select the language you want.
• Camera models sold in certain geographic areas 
may not support display language selection. 
Procedure
[MENU] * Set Up Tab * Sleep
This feature turns off the monitor screen whenever no camera operation is performed 
for a preset amount of time. Press any button to turn the monitor screen back on.
Trigger Time Settings: 30 sec, 1 min, 2 min, Off (Sleep is disabled while “Off” is 
selected.)
• Sleep is disabled under any of the following conditions.
– In the PLAY mode
– While the camera is connected to a computer or other device
– During a slideshow
– During “O Tracking”
– During Voice Recording playback or recording
– During movie recording and playback
• When both sleep and Auto Power Off are turned on, Auto Power Off takes priority.
Specifying the Display Language (Language)
Configuring Sleep State Settings (Sleep)
1
23
Downloaded From camera-usermanual.com Casio Manuals