Casio Exilim Zoom EX Z22 User Manual

							121Appendix
The numbers in parentheses indicate the pages where each item is explained.
.Camera
.
Charger Unit
General Guide
1Shutter button (page 16)
2[ON/OFF] (Power) 
(page 22)
3Flash (page 26)
4Front lamp 
(pages 18, 52)
5Lens
6Microphone 
(pages 39, 68)
7Back lamp 
(pages 16, 22, 26)
8Zoom button 
(pages 16, 36, 62)
9Strap hole (page 2)
bkConnector cover
blUSB/AV port 
(pages 63, 72, 80, 89)
bm[r] (REC) button 
(pages 16, 22)
bn[SET] button (page 23)
bo[BS] button (page 42)
bp[MENU] button 
(page 46)
bqControl button 
([8][2][4][6]) 
(page 23)
br[p] (PLAY) button 
(pages 19, 22)
bsMonitor screen 
(pages 105, 122)
3421
5
6
8 79bk
blbm
bo bp bqbr bs bn
[   ]
[   ]
[   ][   ]
[
SET]
Front Back
btBattery/memory card slots (pages 11, 14, 116, 118)
ckTripod hole
Use this hole when attaching to a tripod.
clSpeaker
ckclbt
Bottom
3 2 1
1[CHARGE] Lamp
2+- Contacts
3AC jack
Downloaded From camera-usermanual.com Casio Manuals 
						

							122Appendix
The monitor screen uses various indicators, icons, and values to keep you informed 
of the camera’s status.
• The sample screens in this section are intended to show you the locations of all the 
indicators and figures that can appear on the monitor screen in various modes. 
They do not represent screens that actually appear on the camera.
Monitor Screen Contents
.Snapshot Recording
Panel : On
Panel : Off
easy Mode1Focus mode (page 48)
2Continuous shutter (page 51)
3Self-timer (page 52)
4Recording mode (page 16)
5Image deterioration indicator (page 37)
6Metering mode (page 59)
7Remaining snapshot memory capacity 
(page 133)
8Snapshot image size (page 24)
9Snapshot image quality (page 57)
bkFlash mode (page 26)
blFace detection (page 28)
bmAnti Shake (page 30)
bnISO sensitivity (page 31)
boWhite balance setting (page 31)
bpExposure compensation (page 33)
bqeasy Mode (page 34)
brDate/time (page 36)
bsShutter speed
btAperture value
ckBattery level indicator (page 12)
clHistogram (page 105)
cmFocus frame (pages 16, 53)
NOTE
• If the current aperture, shutter speed, 
ISO sensitivity, or Auto Exposure is not 
correct, the setting will turn orange 
when you half-press the shutter button.
bm
bq bk
bl
bo
bp
br bn
bs btck
cl
78 9 56 34 2
cm
bn
1
bs bt bn
9
1bo23456 7
br
ck
bp cm cl bm
8
bk
3 7
br
ck8
cm
Downloaded From camera-usermanual.com Casio Manuals 
						

							123Appendix
.Movie Recording
Panel : On
Panel : Off1Recording mode (page 39)
2Remaining movie memory capacity 
(page 39)
3Movie image quality (page 58)
4Focus mode (page 48)
5Self-timer (page 52)
6White balance setting (page 31)
7Exposure compensation (page 33)
8Battery level indicator (page 12)
9Histogram (page 105)
bkMovie recording time (page 39)
12
8 9
bk
6
3
4
7 5
4651
8 9
2bk
7
.Snapshot Viewing
1File type
2Protect indicator (page 66)
3Folder name/file name (page 93)
4Snapshot image quality (page 57)
5Snapshot image size (page 24)
6ISO sensitivity (page 31)
7Aperture value
8Shutter speed
9Date/time (page 36)
bkMetering mode (page 59)
blWhite balance setting (page 31)
bmFlash mode (page 26)
bnRecording mode
boBattery level indicator (page 12)
bpHistogram (page 105)
bqExposure compensation (page 33)
321
bp
bq
bo bl bkbm bn
4
7 5
8
9 6
Downloaded From camera-usermanual.com Casio Manuals 
						

							124Appendix
.Movie Playback
1File type
2Protect indicator (page 66)
3Folder name/file name (page 93)
4Movie recording time (page 61)
5Movie image quality (page 57)
6Date/time (page 36)
7Battery level indicator (page 12)
1
4
5
723
6
The tables in this section show the initial default settings that are configured for menu 
items (displayed when you press [MENU]) after you reset the camera (page 104). 
Menu items depend on whether the camera is in the REC mode or PLAY mode.
• A dash (–) indicates an item whose setting is not reset or an item for which there is 
no reset setting.
.REC Mode
“REC” Tab
Reset Initial Default Settings
FocusQ 
(Auto Focus)
ContinuousOff
Self-timerOff
Face 
DetectionOff
Anti ShakeOff
AF AreaU 
Spot
easy ModeOff
L/R KeyOff
GridOff
Digital ZoomOn
ReviewOn
Icon HelpOn
Memoryb
 BEST SHOT: 
Off / Flash: On / 
Focus: Off / White 
Balance: Off / ISO: 
Off / AF Area: On / 
Metering: Off / Self-
timer: Off / Flash 
Intensity: Off / Digital 
Zoom: On / MF 
Position: Off / Zoom 
Position: Off
Downloaded From camera-usermanual.com Casio Manuals 
						

							125Appendix
“Quality” Tab
“Set Up” Tab
Size9M (3456x2592)
 Quality 
(Snapshots)Normal
 Quality 
(Movies)HQ
EV Shift0.0
White BalanceAuto
ISOAuto
t
»
MeteringB
 Multi
Color FilterOff
Sharpness0
Saturation0
Contrast0
Flash Intensity0
 PanelOn
 DisplayWide
SoundsStartup: Sound 1 / 
Half Shutter: Sound 1 / Shutter: Sound 1 / Operation: Sound 1 / =Operation: ...///// 
=Play: ...////
File No.Continue
World TimeHome
TimestampOff
R
P
Adjust–
Date Style–
Language–
Sleep1 min
Auto Power Off1 min
REC/PLAYPower On
USBMass Storage
Video Out–
Format–
Reset–
B
Downloaded From camera-usermanual.com Casio Manuals 
						

							126Appendix
.PLAY Mode
“PLAY” Tab
“Set Up” Tab
• The contents of the “Set Up” tab are the same in the REC mode and PLAY mode.
Slideshow–
DPOF Printing–
Protect–
Rotation–
Resize–
Trimming–
Dubbing–
Copy–
Downloaded From camera-usermanual.com Casio Manuals 
						

							127Appendix
When things don’t go right... 
Troubleshooting
ProblemPossible Cause and Recommended Action
Power Supply
Power does not 
turn on. 1)The battery may not be loaded correctly (page 11).
2)The battery may be dead. Charge the battery (page 10). If the 
battery goes dead soon after being charged, it means the 
battery has reached the end of its life and needs to be 
replaced. Purchase a separately available CASIO NP-60 
rechargeable lithium ion battery.
The camera 
suddenly powers 
down.1)Auto Power Off may have activated (page 102). Turn power 
back on.
2) The battery may be dead. Charge the battery (page 10).
3) The camera’s protection function may have activated 
because camera temperature is too high. Turn off the camera 
and wait until it cools down before trying to use it again.
Power will not turn 
off. Nothing 
happens when a 
button is pressed.Remove the battery from the camera and then reload it.
Image Recording
Image is not 
recorded when the 
shutter button is 
pressed. 1)If the camera is in the PLAY mode, press [r
] (REC) to enter 
the REC Mode.
2) If the flash is charging, wait until the charge operation 
finishes.
3) If the message “Memory Full” appears, transfer images to 
your computer, delete images you no longer need, or use a 
different memory card.
Auto Focus does 
not focus properly 1)If the lens is dirty, clean it off.
2)The subject may not be in the center of the focus frame when 
you compose the image.
3) The subject you are shooting may not be a type that is 
compatible with Auto Focus (page 21). Use manual focus 
(page 48).
4) You may be moving the camera when shooting. Try shooting 
with Anti Shake or use a tripod.
The subject is out 
of focus in the 
recorded image.The image may not be focused properly. When composing the 
image, make sure the subject is located inside the focus frame.
Downloaded From camera-usermanual.com Casio Manuals 
						

							128Appendix
The flash does not 
fire. 1)If ?
 (Flash Off) is selected as the flash mode, change to 
another mode (page 26).
2) If the battery is dead, charge it (page 10).
3) If a BEST SHOT scene that uses ?
 (Flash Off) is selected, 
change to a different flash mode (page 26) or select a 
different BEST SHOT scene (page 42).
Camera powers 
down during Self-
timer countdown.The battery may be dead. Charge the battery (page 10).
The monitor screen 
image is out of 
focus.1) You may be using Manual Focus and have not focused the 
image. Focus the image (page 48).
2)You may be using ´
 (Macro Mode) for scenery or portraits. 
Use Auto Focus for scenery and portrait shots (page 48).
3) You may be trying to use Auto Focus or )
 (Infinity Mode) 
when shooting a close-up shot. Use the ´
 (Macro Mode) for 
close ups (page 48).
There is a vertical 
line in the monitor 
screen image. Shooting a very brightly lit subject can cause a vertical band to 
appear in the monitor screen image. This is a CCD 
phenomenon known as “vertical smear”, and does not indicate 
malfunction of the camera. Note that vertical smear is not 
recorded with the image in the case of a snapshot, but it is 
recorded in the case of a movie.
There is digital 
noise in images.1) Sensitivity may have been increased automatically for a dark 
subject, which increases the chance of digital noise. Use a 
light or some other means to illuminate the subject.
2) You may be attempting to shoot in a dark location with ?
 
(Flash Off) selected, which can increase digital noise and 
make images appear coarse. In this case, turn on flash (page 
26) or use lights for illumination.
A recorded image 
was not saved.1)Camera power may have been turned off before the save 
operation was complete, which will result in the image not 
being saved. If the battery indicator shows  , charge the 
battery as soon as possible (page 12).
2) You may have removed the memory card from the camera 
before the save operation was complete, which will result in 
the image not being saved. Do not remove the memory card 
before the save operation is complete.
Though available 
lighting is bright, 
the faces of people 
in the image are 
dark.Not enough light is reaching the subjects. Change the flash 
mode setting to <
 (Flash On) for daylight synchro flash (page 
26), or adjust EV shift to the + side (page 33).
ProblemPossible Cause and Recommended Action
Downloaded From camera-usermanual.com Casio Manuals 
						

							129Appendix
Subjects are too 
dark when shooting 
images in a 
seashore or ski 
area.Sunlight reflected by water, sand, or snow, can cause 
underexposure of images. Change the flash mode setting to <
 
(Flash On) for daylight synchro flash (page 26), or adjust EV 
shift to the + side (page 33).
Digital zoom 
(including HD 
zoom) does not 
work. The zoom 
bar indicates zoom 
only up to a zoom 
factor of 3.0.1) The digital zoom setting may be turned off. Turn on digital 
zoom (page 55).
2) Date stamping may be turned on, which will cause digital 
zoom to be disabled. Turn off date stamping (page 99).
The image is out of 
focus during movie 
recording.1) Focusing may not be possible because the subject is outside 
the focus range. Shoot within the allowable range.
2)The lens may be dirty. Clean the lens (page 112).
Playback
The color of the 
playback image is 
different from what 
appears on the 
monitor screen 
when shooting.Sunlight or light from another source may be shining directly 
into the lens when you are shooting. Position the camera so 
sunlight does not shine directly into the lens.
Images are not 
displayed.This camera cannot display non-DCF images recorded onto a 
memory card using another digital camera.
Images cannot be 
edited (with 
resizing, trimming, 
rotation).Note that you cannot edit the following types of snapshots.
•Movies
• Snapshots recorded with another camera
ProblemPossible Cause and Recommended Action
Downloaded From camera-usermanual.com Casio Manuals 
						

							130Appendix
Other
The wrong date 
and time are 
displayed.The date and time setting is off. Set the correct date and time 
(page 100).
The messages on 
the display are in 
the wrong 
language.The wrong display language is selected. Change the display 
language setting (page 101).
Images cannot be 
transferred over a 
USB connection.1) The USB cable may not be connected securely. Check all 
connections.
2) The wrong USB communication protocol is selected. Select 
the correct USB communication protocol in accordance with 
the type of device you are connecting (pages 80, 89).
3)If the camera is not turned on, turn it on.
4) Your computer may not be able to recognize the camera if 
you connect via a USB hub. Always connect directly to the 
computer’s USB port.
Language selection 
screen appears 
when the camera is 
turned on.1) You did not configure initial settings after purchasing the 
camera or the battery may have been left with a dead battery. 
Check the camera setup (pages 13, 101).
2) There may be a problem with the camera’s memory data. If 
this is the case, perform the reset operation to initialize the 
camera’s setup (page 104). After that, configure each setting. 
If the language selection screen does not re-appear when you 
turn the camera on, it means that the camera’s memory 
management data has been restored.
If the same message appears after you turn power back on, 
contact your retailer or a CASIO authorized service center.
ProblemPossible Cause and Recommended Action
Downloaded From camera-usermanual.com Casio Manuals