Casio Exilim Ex Zs10 Users Guide

							71Other Playback Functions (PLAY)
Other Playback Functions (PLAY)
This section explains menu items that you can use to configure settings and perform 
other playback operations.
Pressing [SET] in the PLAY mode will display the PLAY Panel.
.Example PLAY Panel Operation
1.In the PLAY mode, press [SET].
The PLAY Panel will appear along the 
right side of the monitor screen.
2.Use [8] and [2] to select the 
PLAY Panel item you want, and 
then press [SET].
3.The following describes the operations you can perform for each of the 
PLAY Panel items.
Using the PLAY Panel
 ExitExits the PLAY Panel.
 
Playback 
StartThe operation that is performed when this item is selected 
depends on the type of file that is currently displayed on the 
monitor screen.
• Movie: Starts movie playback (page 67).
• Voice recording: Starts voice recording playback (page 51).
• Audio snapshot: Starts audio playback (page 77).
 
SlideshowDisplays a slideshow menu. See “Playing a Slideshow on the 
Camera (Slideshow)” (page 73) for slideshow menu operations.
 RotationDisplays a rotation menu screen. See “Rotating an Image 
(Rotation)” (page 74) for details about the rotation operation.
[SET] [8] [2]
PLAY Panel
â
P
ä
ÿ
Downloaded From camera-usermanual.com Casio Manuals 
						

							72Other Playback Functions (PLAY)
.PLAY Menu Operations in This Manual
PLAY menu operations are represented in this manual as shown below. The following 
operation is the same one described under “Example PLAY Panel Operation” on 
page 71.
 MenuDisplays the PLAY menu. You can perform the following 
operations on the PLAY menu.
1Use [4] and [6] to select the tab 
where the menu item you want to 
configure is located.
2Use [8] and [2] to select the menu 
item you want, and then press [6].
3Use [8] and [2] to change the 
setting of the selected menu item.
4Press [SET] to apply the setting.
NOTE
• Pressing [ ] (Delete) performs one of the following 
operations.
– If you previously selected a tab, pressing [ ] (Delete) 
returns to the viewfinder screen.
– If you previously selected menu item, pressing [ ] (Delete) 
returns to the tab.
à
Selected menu item
Tabs
Procedure
[p] (PLAY) * [SET] * MENU * PLAY Tab * Protect
Use [8] and [2] to select the bottom PLAY Panel 
item (MENU) and then press [SET].
Use [4] and [6] to select the 
“PLAY” tab.
Press 
[p] (PLAY).Press [SET].
Use [8] and [2] to select 
“Protect” and then press [6].
Downloaded From camera-usermanual.com Casio Manuals 
						

							73Other Playback Functions (PLAY)
1.In the PLAY mode, press [SET].
2.Use [8] and [2] to select the third PLAY Panel item from the bottom 
(Slideshow) and then press [SET] (page 71).
• To stop the slideshow, press [ ] (Delete). Pressing [SET] instead of [ ] 
(Delete) stops the slideshow and returns to the menu screen.
• Adjust audio volume by pressing [2] and then press [8] or [2] during 
playback.
• All button operations are disabled while the slideshow is transitioning from one 
image to another.
• The time required for transition from one image to another may be longer in the 
case of an image that was not recorded with this camera.
Playing a Slideshow on the Camera (Slideshow)
StartStarts the slideshow.
TimeTime from the start to the end of the slideshow
1 to 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes
IntervalAmount of time each image remains displayed
Use [4] and [6] to select a value from 1 to 30 seconds, or “MAX”.
If you specify a value from 1 to 30 seconds, images change at the 
specified interval, but the audio portion of movies and audio 
snapshots will continue to play until the end.
When the slideshow reaches a movie file while “MAX” is selected, 
only the first frame of the movie will displayed. Voice Recording 
files are not played back when “MAX” is selected.
EffectTurns effect on or off.
On: Turns on the image change effect and background music.
Off: No image change effect or background music
Downloaded From camera-usermanual.com Casio Manuals 
						

							74Other Playback Functions (PLAY)
1.In the PLAY mode, display the snapshot or movie you want to rotate.
2.Press [SET].
3.Use [8] and [2] to select the second PLAY Panel item from the bottom 
(Rotation) and then press [SET] (page 71).
4.Use [8] and [2] to select “Rotation” and then press [SET].
Each press of [SET] will rotate the displayed image 90 degrees left.
5.When the displayed image is at the orientation you want, press [ ] 
(Delete).
NOTE
• Note that this procedure does not actually change the image data. It simply alters 
how the image is displayed on the camera’s monitor screen.
• An image that has been protected or zoomed cannot be rotated.
• The original (unrotated) version of the image will be displayed on the image menu 
screen.
Procedure
[p] (PLAY) * Snapshot Screen * [SET] * MENU * PLAY Tab * 
Red Eye
Using the flash to shoot at night or in a dimly lit room can cause red spots inside the 
eyes of people who are in the image. This is caused when the light from the flash 
reflects off of the retina of the eye. Red eye correction corrects the eye colors of 
subjects to their normal colors when red eye occurs while using the flash.
NOTE
• The original snapshot is retained in memory and not deleted.
• Red eye correction may not be possible in the case of small faces or profiles.
• Red eye correction may not produce the desired effect under certain conditions.
Rotating an Image (Rotation)
Using Red Eye Correction (Red Eye)
CorrectTurns on red eye correction.
CancelTurns off red eye correction.
Downloaded From camera-usermanual.com Casio Manuals 
						

							75Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [SET] * MENU * PLAY Tab * 
DPOF Printing
See page 82 for details.
Procedure
[p] (PLAY) * [SET] * MENU * PLAY Tab * Protect
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you perform the format 
operation (page 114).
Selecting Images for Printing (DPOF Printing)
Protecting a File Against Deletion (Protect)
OnProtects specific files.
1Use [4] and [6] to scroll through the files 
until the one you want to protect is 
displayed.
2Use [8] and [2] to select “On” and then 
press [SET].
An image that is protected is indicated by 
the › icon.
3To protect other files, repeat steps 1 and 2.
To exit the protect operation, press [ ] (Delete). To unprotect a file, 
select “Off” instead of “On” in step 2 above.
All Files: 
OnProtects all files.1Use [8] and [2] to select “All Files: On” and then press [SET].
2Press [ ] (Delete).
To unprotect all files, select “All Files: Off” instead of “All Files: On” in 
step 1 above.
Downloaded From camera-usermanual.com Casio Manuals 
						

							76Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [SET] * MENU * PLAY Tab * 
Resize
You can reduce the size of a snapshot and save the result as a separate snapshot. 
The original snapshot is also retained. You can select resize an image to one of three 
image sizes: 10M, 6M, VGA.
• Resizing a 3:2 or 16:9 size snapshot will create an image with an aspect ratio of 
4:3, with both sides cut off.
• The recording date of the resized version of the snapshot will be the same as the 
recording date of the original snapshot.
Procedure
[p] (PLAY) * Snapshot Screen * [SET] * MENU * PLAY Tab * 
Trimming
You can crop a snapshot to trim parts you do not need, 
and save the result in a separate file. The original 
snapshot is also retained.
Use the zoom controller to zoom the image to the size you 
want, use [8], [2], [4], and [6] to display the portion of 
the image you want to cut out, and then press [SET].
• The image produced by cropping a 3:2 or 16:9 image 
will have an aspect ratio of 4:3.
• The recording date of the cropped image will be the 
same as the recording date of the original snapshot.
Resizing a Snapshot (Resize)
Cropping a Snapshot (Trimming)
Represents
snapshot area
Part of snapshot that is
currently displayed
Zoom factor
Downloaded From camera-usermanual.com Casio Manuals 
						

							77Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [SET] * MENU * PLAY Tab * 
Dubbing
2.Press [SET] again to stop audio recording.
• Take care that you do not block the camera’s microphone 
with your fingers while recording.
• Good recording results are not possible when the camera is 
too far away from what you are trying to record.
• Your camera supports the following audio data formats.
– Audio Format: WAVE/IMA-ADPCM (WAV extension)
• You cannot add audio to an image that is protected.
• To delete audio, perform the following operation:
Dubbing * Delete * [SET] * [ ] (Delete).
IMPORTANT!
• Note that you cannot restore the original audio of an Audio Snapshot after you 
delete or re-record it.
1.In the PLAY mode, use [4] and [6] to scroll through the images until 
the Audio Snapshot you want is displayed.
An audio snapshot is one that has a ˆ icon.
2.Press [0] (Movie) to start playback.
Adding Audio to a Snapshot (Dubbing)
You can add audio to a snapshot after you shoot it. 
You can re-record a snapshot’s audio whenever you 
want. You can record up to about 30 seconds of audio 
for a single snapshot.
1.Press [SET] to start audio recording.
Remaining recording time
To play snapshot audio
Microphone
Downloaded From camera-usermanual.com Casio Manuals 
						

							78Other Playback Functions (PLAY)
Voice Recording Playback Controls
• Audio of an Audio Snapshot also can be played back on a computer with Windows 
Media Player or QuickTime.
Procedure
[p] (PLAY) * Snapshot Screen * [SET] * MENU * PLAY Tab * 
Copy
Files can be copied from the camera’s built-in memory to a memory card or from a 
memory card to built-in memory.
NOTE
• You can copy snapshots, movies, audio snapshots, or Voice Recording files you 
recorded with this camera.
Fast forward/fast reverse[4] [6]
Play/pause[SET]
Volume adjustmentPress [2] and then 
press [8] [2].
Display content switching[8] (DISP)
Stop playback[0] (Movie)
Copying Files (Copy)
Built-in * CardCopies all files from built-in camera memory to a memory card.
This option copies all the files in built-in camera memory. It 
cannot be used to copy a single file.
Card * Built-inCopies a single file on the memory card to camera built-in 
camera memory. Files are copied to the folder in built-in 
memory whose name has the largest serial number.
1Use [4] and [6] to select the file you want to copy.
2Use [8] and [2] to select “Copy” and then press [SET].
Downloaded From camera-usermanual.com Casio Manuals 
						

							79Printing
Printing
• You can specify which images you want to print, the number of copies, and date 
stamp settings before printing (page 82).
Printing Snapshots
Professional Print Service
You can take a memory card that contains the images you want 
to print to a professional print service and have them printed.
Printing on a Home Printer
Printing Images on a Printer with Memory Card Slot
You can use a printer equipped with a memory card slot to print 
images directly from a memory card. For details, see the user 
documentation that comes with your printer.
Connecting Directly to a PictBridge Compatible 
Printer
You can print on a printer that supports PictBridge (page 80).
Printing with a Computer
After transferring the images to your computer, use 
commercially available software to print.
Downloaded From camera-usermanual.com Casio Manuals 
						

							80Printing
You can connect the camera directly to a printer that supports PictBridge and print 
images without going through a computer.
.To set up the camera before connecting to a printer
1.Turn on the camera. Next, press [SET] and then display the REC menu 
(page 55) or the PLAY menu (page 71).
2.On the “Set Up” tab, select “USB” and then press [6].
3.Use [8] and [2] to select “PTP (PictBridge)”, and then press [SET].
.Connecting the Camera to a Printer
Use the USB cable that 
comes bundled with the 
camera to connect the 
camera to your printer’s USB 
port.
• Make sure that you insert 
the cable connector into 
the USB/AV port until you 
feel it click securely into 
place. Failure to insert the 
connector fully can result 
in poor communication or 
malfunction.
• Note that even while the connector is fully inserted, you still 
will be able to see the metal part of the connector as shown in 
the illustration.
• When connecting the USB cable to a USB port, make sure 
you align the connector correctly with the port.
Connecting Directly to a PictBridge Compatible Printer
USB cable 
(included with camera)
USB port
[USB/AV] 
port
Making sure that the   mark on the USB cable 
connector is towards the lens side, connect the 
cable to the camera.
Large connector
Small connector
C
Downloaded From camera-usermanual.com Casio Manuals