Casio Exilim EX ZS10 User Manual

11
.Movie Recording
. Snapshot Viewing
. Movie Playback
1Recording mode (page 48)
2White balance setting (page 65)
3Remaining movie memory capacity (page 48)
4Movie recording time (page 48)
5Flash (page 39)
6Exposure compensation (page 64)
7Battery level indicator (page 21)
8Movie recording in progress (page 48)
1File type
2Protect indicator (page 75)
3Folder name/file name (page 103)
4Snapshot image quality (page 64)
5Snapshot image size (page 35)
6ISO sensitivity (page 66)
7Aperture value
8Shutter...

12
You can turn display information on and off by pressing [8] (DISP). You can 
configure separate settings for the REC mode and PLAY mode.
Configuring Monitor Screen Settings
Information display onDisplays information about image settings, etc (REC 
mode only).
Information display + 
Date/Time onIn addition to information about snapshot settings, 
displays movie setting information and the date/time 
screen.
• You can specify the date style you want to use 
(page 110).
Information display offNo...

13Quick Start Basics
Quick Start Basics
What is a digital camera?
Delete
A digital camera stores images on a memory card, so you can record and 
delete images a countless number of times.
Play Record
You can use the images you record in a variety of different ways.
Store images on your 
computer.Print images. Attach images to e-mail.
Downloaded From camera-usermanual.com Casio Manuals 

14Quick Start Basics
Your CASIO camera is packed with a powerful selection of features and functions to 
make recording of digital images easier, including the following three main functions.
What you can do with your CASIO camera
BEST SHOT
Simply select the sample scene you want and the 
camera sets up automatically. Then all you need 
to do is press the shutter button for perfect images.
Anti Shake
The camera corrects automatically to minimize 
image blur due to camera movement and high 
speed subject...

15Quick Start Basics
Note that the battery of a newly purchased camera is not charged. Perform the steps 
below to load the battery into the camera and charge it.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-120) 
for power. Never try to use any other type of battery.
1.Open the battery cover.
Pressing the battery cover, slide it in 
the direction indicated by the arrow.
2.Load the battery.
With the EXILIM logo on the 
battery facing downwards (in 
the direction of the...

16Quick Start Basics
You can use either of the two following methods to charge the camera’s battery.
• USB-AC adaptor
• USB connection to a computer
.To charge with the USB-AC adaptor
1.Turn off the camera.
Check to make sure that the camera’s monitor screen is 
blank. If it isn’t, press [ON/OFF] (Power) to turn off the 
camera.
2.After connecting the 
supplied USB cable 
to the USB-AC 
adaptor, plug the 
adaptor into a 
household power 
outlet.
Charge the Battery
[ON/OFF] (Power)
USB
USB-AC adaptorPower...

17Quick Start Basics
3.Connect the USB 
cable to the camera.
The back lamp should 
light red, indicating that 
charging has started.
The back lamp will go 
out when charging is 
complete.
It takes about 
110 minutes to achieve 
a full charge. Charging 
may take longer 
depending on charging 
conditions.
Back Lamp Operation
4.After charging is complete, disconnect the USB cable from the camera 
and then unplug the adaptor from the power outlet.
Lamp StatusDescription
Lit Red Charging
Flashing RedAbnormal...

18Quick Start Basics
.To charge using a USB connection to a computer
The battery loaded in the camera is charged whenever the camera is connected 
directly to a computer with the USB cable.
• Depending on the setup of your computer, you may not be able to charge the 
camera’s battery over a USB connection. If this happens, use of the USB-AC 
adaptor that comes with the camera is recommended.
1.Turn off the camera.
Check to make sure that the camera’s monitor 
screen is blank. If it isn’t, press [ON/OFF]...

19Quick Start Basics
2.With your computer 
turned on, connect the 
camera to it.
The back lamp should light 
red, indicating that charging 
has started.
The back lamp will go out 
when charging is complete.
It takes about 130 minutes 
to achieve a full charge. 
Charging may take longer 
depending on charging 
conditions.
Back Lamp Operation
3.After charging is complete, disconnect the USB cable from the camera 
and then from the computer.
Lamp StatusDescription
Lit Red Charging
Flashing RedAbnormal...

20Quick Start Basics
NOTE
• Even if you turn on the camera, the battery will continue to charge if there is a USB 
connection with a computer. In this case, however, back lamp operation will 
change as described below.
Back Lamp Operation
IMPORTANT!
• Charging is not performed while the connected computer is in the hibernate mode.
• A charging error can occur immediately after charging begins or some time after 
charging begins. A charging error is indicated by the back lamp flashing red.
Other Charging...